Remove Batteries Remove Hybrid Remove Low Cost Remove Ni-Li
article thumbnail

University of Sydney team advances rechargeable zinc-air batteries with bimetallic oxide–graphene hybrid electrocatalyst

Green Car Congress

University of Sydney team advances rechargeable zinc-air batteries with bimetallic oxide–graphene hybrid electrocatalyst. Zinc-air batteries are powered by zinc metal and oxygen from the air. Zinc-air batteries are powered by zinc metal and oxygen from the air. Other two amorphous bimetallic, Ni 0.4

Zinc Air 150
article thumbnail

U Akron team develops Mn-based high performance anode for Li-ion batteries

Green Car Congress

Researchers at the University of Akron have developed hierarchical porous Mn 3 O 4 /C nanospheres as anode materials for Li-ion batteries. mA/g), excellent ratability (425 mAh/g at 4 A/g), and extremely long cycle life (no significant capacity fading after 3000 cycles at 4A/g) as an anode in a Li-ion battery. Li/Li + ).

Li-ion 199
article thumbnail

6 DOE-funded applied battery research projects targeting Li-ion cells with >200 Wh/kg for PHEVs and EVs

Green Car Congress

The US Department of Energy (DOE) has six recently launched applied battery research (ABR) projects as part of its Vehicle Technologies portfolio. TIAX proposes that using a blended Si/hard carbon anode will allow the design of cells capable of delivering high energy during EV operation and high power during HEV mode of the battery.

Li-ion 316
article thumbnail

Beijing, Argonne researchers develop new solid-state Li-ion battery; glassy nanocomposite electrolyte with ILs

Green Car Congress

In … solid-state LIBs [lithium-ion batteries], one important component that needs to be improved to make it more suitable for high performance applications is the electrolyte material. Such solid composite electrolytes also have been previously shown to reduce lithium dendrite formation and proliferation in lithium metal batteries.

Li-ion 150
article thumbnail

Argonne and Hanyang University Develop New High-Energy Cathode Material With Improved Thermal Stability; Good Fit for PHEV Applications

Green Car Congress

SEM of Li[Ni 0.64 Mn 0.18 ]O 2 particle with concentration gradient of Ni, Co, and Mn contents. The results, say the researchers, suggest that the cathode material could enable production of batteries that meet the demanding performance and safety requirements of plug-in hybrid electric vehicles. From Sun et al.

Ni-Li 170
article thumbnail

Faradion demonstrates proof-of-concept sodium-ion electric bike

Green Car Congress

E-bike powered by Faradion prototype Na-ion battery pack. For the proof-of-concept, the cells were manufactured to be larger than necessary to avoid unnecessary costs and lengthy manufacturing processes at this early stage. Sodium-ion intercalation batteries—i.e., Sodium-ion intercalation batteries—i.e.,

Sodium 150
article thumbnail

Update on Select Argonne Lab Activity with HEV and PHEV Li-ion Batteries

Green Car Congress

Khalil Amine, Senior Scientist and Manager of Argonne National Laboratory’s advanced Lithium Battery Program, provided an update on some of the activities at Argonne on advanced high-power systems for hybrid-electric (HEV) and high-energy systems for plug-in hybrid electric vehicles (PHEV). Co 15 Al 0.05 O 2 ) cell.

Li-ion 150