article thumbnail

A DIY E-bike Conversion on the Cheap

Cars That Think

add an electric motor to a bicycle —a project that involved a considerable outlay of money and many hours in a machine shop behind a lathe. Purpose-built electric bikes and e-bike conversions using hub-motors are now commonplace. It uses an "outrunner" motor designed for electric skateboards. Fast forward a dozen years.

DIY 145
article thumbnail

A DIY E-bike Conversion on the Cheap

Cars That Think

add an electric motor to a bicycle —a project that involved a considerable outlay of money and many hours in a machine shop behind a lathe. Purpose-built electric bikes and e-bike conversions using hub-motors are now commonplace. It uses an "outrunner" motor designed for electric skateboards. Fast forward a dozen years.

DIY 98
article thumbnail

Looking to get in a hybrid for cheap? Used Toyota Prius 1.5 HSD 2004-2009 Review

Green Car Congress

How did it all start? I knew I wanted something for her that was cheap to maintain, had a reliable automatic transmission, came with cruise control, AC. Having enough electric charge to last a 5-15 minute in silence in a traffic jam. During reversing, the Prius is powered only by the electric motor.

2004 409
article thumbnail

How I turned a shipping container into a solar off-grid charging station with A/C

Baua Electric

That seemed like a great idea to put to use for all of my electric “toys”. Between my electric bikes, e-motorcycles, e-ATVs, electric tractors, and a few other things I’m probably forgetting, having a weather-sealed, solar-powered off-grid charging shed would be a big benefit. Here’s how I did it.

Grid 52
article thumbnail

Picking Your Dream Car for Conversion

DIY Electric Car

So your almost there, ready to take the plunge as well to convert a car from gas to electric or maybe you dino drinker is on its last legs and is going to need to be replaced soon. A junky gas car will make a junky electric car. Try to do a gas to electric conversion not restoration unless it?s s your dream car. Eco Steve

article thumbnail

This Huge DIY Workbench Gives You a Hand

Cars That Think

Toward the back of the bench rests a hot-air gun and a soldering station, as well as my bag of other electrical tools. I added a DIY solder squid—a block with four flexible arms that I use to hold components in place while soldering—with a concrete base and an automatic solder fume extractor. James Provost.

DIY 99
article thumbnail

Electric Bike Conversion Kit Selection

Electric Vehicless

If you want to convert your bicycle into an electric bike than you are on the right track. It is easy to convert your bicycle into an electric bike, but if you consider some technical things during selection of an electric bike kit than it will ease your journey to convert the bicycle into an electric bike & running it.

Kits 52