Green Car Congress
JULY 31, 2019
Circa’s solvent Cyrene—dihydrolevoglucosenone—is specifically being used to recover polyvinylidene fluoride (PVDF)—a high performance polymer widely used as a binder in Li-ion battery cathodes. By using Cyrene, R2LIB is helping recover a valuable polymer in a sustainable way. Sherwood, J., McElroy, C.
Green Car Congress
MAY 3, 2013
Researchers in Japan have developed a novel polymer electrolyte membrane fuel cell (PEFC) that shows high durability (>400,000 cycles) together with high power density (252 mW/cm 2 ) at high temperatures of 120°C under a non-humidified condition. Berber et al. Click to enlarge. Earlier post.). doi: 10.1038/srep01764. Fuel Cells'
Green Car Congress
JULY 8, 2015
CRI, founded in 2006 in Reykjavik, Iceland, is developing technology to produce renewable methanol from clean energy and recycled CO 2 emissions. CRI is presenting at the 4 th Conference on CO 2 as Feedstock for Fuels, Chemistry and Polymers , being held at the end of September in Essen, Germany. Earlier post.). Earlier post.)
Green Car Congress
MARCH 31, 2013
Approximately 4,500 barrels of oil and water (189,000 gallons US) have been recovered. Wabasca Heavy is a heavy oil from the Athabasca region obtained by polymer injection and water flooding and typically has a 19-20 API gravity and 4.15 It carries 90,000 barrels of oil per day, almost exclusively Western Canadian crude oil.
Green Car Congress
MARCH 12, 2009
will jointly offer Vaperma’s Siftek polymer membrane technology, which is designed to lower energy consumption for reduce operational costs and emissions in the energy-intensive ethanol production process. The permeation of water across the membrane occurs by adsorption of water onto the interior surface of the membrane.
Green Car Congress
JULY 31, 2009
I) Exfoliated Graphite NanoPlatelets and II) Metal Nano Particles as Multifunctional Materials for Polymers and Energy Storage (Drzal). Exfoliated Graphite Nanoplatelets (xGnP) A Carbon Nanotube Alternative for Modifying the Properties of Polymers and Composites (Drzal, 2006).
Green Car Congress
OCTOBER 4, 2009
Secondary recovery techniques generally injecting water or gas to displace oil and drive it to a production wellbore, resulting in the recovery of 20 to 40% of the original oil in place. During primary production, natural reservoir pressure or gravity pushes oil into the wellbore. Jaramillo et al.
Expert insights. Personalized for you.
186 
Let's personalize your content