Green Car Congress
FEBRUARY 2, 2019
Researchers at the Fraunhofer Institute for Chemical Technology ICT are working together with the Karlsruhe Institute of Technology KIT to develop a new cooling concept that will enable polymers to be used as EV electric motor housing materials, thereby reducing the weight of the motor and thus, the EV itself.
Green Car Congress
JUNE 24, 2023
Researchers from the Karlsruhe Institute of Technology (KIT) and their Canadian partners have designed a low-cost photoreactor design for solar-driven synthesis. The photoreactors have a low level of complexity, are readily manufacturable via mass fabrication techniques in polymers, and are easy to adapt to diverse photocatalysts.
Green Car Congress
JUNE 7, 2010
The Fuel Cell Black Cab uses an Intelligent Energy fuel cell (30 kW net output) as a range extender for the 14 kWh lithium polymer battery pack, allowing the vehicle to operate for a full day without the need for refuelling. London’s Deputy Mayor for Policing and Chair of the London Hydrogen Partnership, Kit Malthouse. Earlier post.).
Green Car Congress
APRIL 28, 2016
Initiatives include optimization of the water jacket for improved heat dissipation and adaptation of the valve angle and combustion chamber for the best possible execution of the Miller combustion process. Cylinder deactivation (ACT). APS-coated cylinder walls (atmospheric plasma spray). The cylinder head has been extensively re-engineered.
Green Car Congress
JUNE 24, 2013
The XL1 is aggressively optimized for efficiency in all areas of its design and technology—from materials (carbon fiber reinforced polymer monocoque); to powertrain (0.8L The ceramic brakes make a sound similar to sliding out on gravel, or swooshing through water. two-cylinder diesel, 20 kW electric motor and 5.5
Green Car Congress
AUGUST 23, 2019
Partners of the P2X Kopernikus project on the premises of Karlsruhe Institute of Technology (KIT) in Germany have demonstrated the production of fuel from air-captured CO2 using—for the first time—a container-based test facility integrating all four chemical process steps needed to implement a continuous process.
Green Car Congress
APRIL 22, 2009
Leo’s “kit” consists of a 60 kW water-cooled AC motor with controller, a 30 kWh or a 16 kWh lithium polymer power pack with multi-battery management system (BMS), and charger. The Leo power pack is made up of eight modules of ten lithium polymer cells, with each module assembled from ten small Li -ion polymer cells using a BMS.
Expert insights. Personalized for you.
322 
Let's personalize your content