article thumbnail

A DIY Tracker Tough Enough for the Arctic

Cars That Think

So, I set about building an open-source ice tracker from DIY components that not only proved to be much, much cheaper but also much more capable than the commercial options. This consumed around 350 milliamperes while running at 5 volts for about 1.7 watts, but the Apollo3 uses just 500 microamperes at 3.3 microwatts.

DIY 87
article thumbnail

A DIY E-bike Conversion on the Cheap

Cars That Think

Here I took advantage of already owning an electric lawnmower, figuring that the 40-volt, 4-ampere-hour battery I had for it would serve well. It would have been possible to have such information displayed on a smartphone, using a. The third essential element of any e-bike is, of course, the battery.

DIY 145
article thumbnail

A DIY E-bike Conversion on the Cheap

Cars That Think

Here I took advantage of already owning an electric lawnmower, figuring that the 40-volt, 4-ampere-hour battery I had for it would serve well. It would have been possible to have such information displayed on a smartphone, using a. The third essential element of any e-bike is, of course, the battery.

DIY 98
article thumbnail

Chevy Launches New Site for Volt

DIY Electric Car

Chevrolet recently launched an information and social networking site for their upcoming Electric Vehicle, the Volt. It seems to be just getting started but looks to be the best way (besides DIY Electric Car, of course), to get current information on the Volt. The site is www.chevroletvoltage.com

Volt 100
article thumbnail

DEED advertising pays off

Electric Auto Association

We’re 100% used EVs and hybrids,” said Robert Beas of Beas Auto Sales , noting that he displayed a pre- owned Prius Prime, Mitsubishi Outlander, Hyundai Sonata, Chevrolet Volt, and Ford C-max plug-in hybrids at the event. Dave Atherton answering questions from Toyota representatives about his DIY modified 2008 Prius.

Prius 92
article thumbnail

Search for Buried Treasure With This DIY Magnetometer

Cars That Think

With that information, I constructed what’s called a fluxgate magnetometer. But feeding it to a second op amp configured as a simple comparator (one that compares the input with zero volts) squared the signal up nicely, with the output switching between the +12-volt and –12-volt supply rails every 3 milliseconds or so.

DIY 98
article thumbnail

DIY Gamma-Ray Spectroscopy with a Raspberry Pi Pico

Cars That Think

So when I decided to build a cheap DIY scintillating gamma spectrometer, it was the natural choice—although I didn’t realize I’d find myself navigating around teething problems of the sort that often affect a first-generation integrated circuit. I find it fascinating that you can get so much information out of a single device.

DIY 101