Green Car Congress

SEPTEMBER 8, 2020

C using waste heat from a nearby geothermal plant to release the CO 2 molecules. —Hagen Seifert, Head of Sustainable Product Concepts at Audi. Audi is also supporting the Swiss start-up with its technological know-how, such as for the development of new heat exchanger concepts.

Audi 446

Audi Iceland CO2 Carbon 446

Green Car Congress

JULY 2, 2013

million (US$12 million) to subsidize the project within its “Technologies for Sustainability and Climate Protection – Chemical Processes and Use of CO 2 ” scheme. The German Federal Ministry of Education and Research (BMBF) is granting a total of €9.2 The project started on 1 July 2013, and is expected to last three years.

Hydrogen 199

Hydrogen Production CO2 Climate Protection 199

Green Car Congress

JANUARY 28, 2014

These technologies include, but are not limited to, advanced aftertreatment and waste heat recovery; lean-burn plus lean-NO x emissions traps; integration of zero-emission miles technologies; further refinements in reducing friction and parasitic energy losses; and widespread utilization of renewable and natural gas and hydrogen blends.

Climate 257

Climate Gas Emissions California 257

Green Car Congress

JULY 18, 2017

It is important that climate policy is neutral in terms of technology; in other words that it sets climate protection goals without stipulating the technologies to be used to achieve them. Modern combustion engines will still be an indispensable component of mobility concepts in 2030.

Manufacturer 150

Manufacturer Engine Germany Climate Protection 150

Green Car Congress

DECEMBER 25, 2011

The deadline to submit research concepts is 31 January 2012. ARB says that the nature and scope of the proposed research concepts will vary as will the size and duration of each project. ARB will also consider projects outside of these areas, to the extent that they provide clear and direct support to its mission.

Pollution 231

Pollution 2012 California 2013 231

Green Car Congress

MAY 1, 2022

Metal offcuts and filings from milling, for example, will be recycled and reused, while waste heat from cooling will be fed into a circuit to heat indoor spaces and water. A further key issue in the field of climate protection is biodiversity. Another element of sustainable production is consistent circularity.

BMW 363

BMW CO2 Production Climate Protection 363