Cars That Think
AUGUST 20, 2021
Here I took advantage of already owning an electric lawnmower, figuring that the 40-volt, 4-ampere-hour battery I had for it would serve well. Being an open-source design no doubt keeps the price of this hardware down: The controller I bought set me back a mere $85. The third essential element of any e-bike is, of course, the battery.
Cars That Think
AUGUST 20, 2021
Here I took advantage of already owning an electric lawnmower, figuring that the 40-volt, 4-ampere-hour battery I had for it would serve well. Being an open-source design no doubt keeps the price of this hardware down: The controller I bought set me back a mere $85. The third essential element of any e-bike is, of course, the battery.
Green Car Congress
FEBRUARY 14, 2020
I knew I wanted something for her that was cheap to maintain, had a reliable automatic transmission, came with cruise control, AC. There are also videos on Youtube where people change the pack the DIY way or the individual modules, but be aware to only buy individual modules from a trusted source. It was time to buy our first car.
Cars That Think
JUNE 22, 2022
So when I decided to build a cheap DIY scintillating gamma spectrometer, it was the natural choice—although I didn’t realize I’d find myself navigating around teething problems of the sort that often affect a first-generation integrated circuit. This article appears in the July 2022 print issue as “DIY Gamma-Ray Spectroscopy.”.
Electric Vehicless
SEPTEMBER 6, 2020
If you want to design a battery pack on your own you may refer to the following book ( DIY Lithium Batteries: How to Build Your Own Battery Packs ) otherwise purchase a battery pack. Battery capacity Watt-hours = Amp -hrs X Volts . Bicycle A has a 36 Volts & 20 AH battery = 720 watt hours. Also Read:-.
Honda S2000 EV Conversion
MARCH 15, 2009
I wasn't sure what I was going to do for balancing as anything on the market is not cheap. volts that would otherwise be going into the cell. I named them Volt Blocher. There will soon be two others using the Volt Blocher units. Dimitri and Jim have ordered their DIY kits and will hopefully have them up and running soon.
Cars That Think
JULY 21, 2021
I added a DIY solder squid—a block with four flexible arms that I use to hold components in place while soldering—with a concrete base and an automatic solder fume extractor. I did just that, pulling out a strip of 12-volt nonaddressable LEDs and powering them with a simple wall power adapter. James Provost. But why stop there?
Expert insights. Personalized for you.
145 
Let's personalize your content