Green Car Congress

SEPTEMBER 16, 2020

Its turbocharger with variable turbine geometry makes optimal use of the exhaust gas energy for early and harmonious torque development. With full gas tanks, the car has an NEDC range of up to 495 (307.6 Before the tanks are mounted in the car, they are pressure tested at 300 bar, far above the operating pressure of 200 bar.

Audi 504

Audi Gas Gas-Electric Gasoline-Electric 504

Green Car Congress

AUGUST 10, 2011

This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber. Plasan Carbon Composites. . $6,000,000. Zoltek Companies, Inc. Grantee Description. Amerigon Incorporated.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

DECEMBER 20, 2013

mpg) for cars and 203 gCO 2 /mi (43.7 Integrated computational materials engineering (ICME) development of carbon fiber composites for lightweight vehicles. Possible areas of interest for technology to improve fuel efficiency include: Development of high-performance low-temperature catalysts for exhaust aftertreatment.

Vehicles 246

Vehicles Fuel Economy Carbon Fiber Plug-in 246

Green Car Congress

DECEMBER 16, 2010

The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Development of Low-Cost Carbon Fiber. AOI 2: Lightweighting Materials. Subtopics include: Low-Cost Development of Magnesium.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

AUGUST 14, 2014

Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles (Area of Interest 2). This project will develop, integrate and implement predictive models for Carbon-Fiber Reinforced Polymer composites that link the material design, molding process and final performance.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

MARCH 1, 2016

Air drawn into the micro turbine is passed through a heat exchanger where heat from the exhaust air is transferred to the cold intake air after it has been compressed. As this hot exhaust gas is expelled, it passes through the heat exchanger to ensure the heat energy is recuperated and transferred to cold intake air. Power-dense cells.

Range 150

Range Companies China Carbon Fiber 150

Green Car Congress

APRIL 10, 2012

L/100 km) for cars and more than 43 mpg (5.5 Exhaust Aftertreatment Materials. In order of priority, low temperature exhaust after-treatment catalysts are needed for the reduction of Oxides of Nitrogen (NO x ), Carbon Monoxide (CO), or unburned hydrocarbons (HCs) from internal combustion engines. Advanced Manufacturing.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210