Remove Gas Remove Greece Remove Hydrogen Remove Water
article thumbnail

BASF and Advent Technologies to establish end-to-end supply chain for HT-PEM fuel cell systems in Europe

Green Car Congress

HT-PEM fuel cells operate at 120 to 180°C, offer a broad operating window and tolerate impurities in the hydrogen fuel gas. We are committed to building a full loop supply chain for green hydrogen technologies including precious metal services, catalysts, components and recycling.

Supplies 259
article thumbnail

Biogas2PEM-FC project converts waste from olive oil production to electricity

Green Car Congress

A three-part subsystem was developed; the primary step is an anaerobic digestion reaction to produce biogas from the olive mill waste; the second step is a reformer to convert the biogas to a hydrogen rich gas (reformate); and the last step is to pass the reformate gas to a fuel cell system to make electricity. Helbio, Greece.

Waste 225
article thumbnail

DLR-led NEMESIS 2+ project develops compact direct steam reformer for diesel/biodiesel to H2

Green Car Congress

The European NEMESIS 2+ consortium has and successfully tested a pre-commercial on-site system for the production of hydrogen from diesel and biodiesel. kilograms of hydrogen from 20 liters of biodiesel per hour—this roughly corresponds to the fuel tank of a B-Class F-cell vehicle. per kilogram of hydrogen (US$6.53).

Diesel 150
article thumbnail

Electrochemical Haber-Bosch process for ammonia production; 50% the CO2 and 25% the energy

Green Car Congress

In ammonia plants, hydrogen is generated by steam-methane reforming (SMR) and water-gas shift (WGS) and, subsequently, is purified for the high-pressure ammonia synthesis. Hydrogen generation occurs on a Ni-composite electrode, while VN-Fe is the ammonia synthesis electrocatalyst.

Greece 282