Remove Available Remove Design Remove ECC Remove Power
article thumbnail

Peugeot Applying New 1.6L Diesel With ECCS in 308 CC

Green Car Congress

liter HDi FAP diesel engine has been designed to meet the requirements of the new Euro 5 emission standards. Its maximum power output is 112 bhp at 3,600 rpm. liter HDi diesel engines that were launched earlier, Extreme Combustion Chamber System (ECCS) technology is much to the fore. liter 112 bhp (84 kW) diesel engine.

ECC 199
article thumbnail

Pierburg introduces air conditioning components specifically for EVs

Green Car Congress

In vehicles with a conventional internal combustion engine, the a/c compressor is usually driven via a pulley and the V-belt but in electric vehicles, this mechanism is not available. Pierburg GmbH has developed an electric a/c compressor (eCC) that incorporates the supplier’s many years of experience in the field of mechatronic components.

ECC 199
article thumbnail

Infineon introduces next-generation of microcontroller multicore architecture for automotive applications

Green Car Congress

The new architecture is the foundation of Infineon’s next generation MCU family designed to meet the requirements of upcoming automotive powertrain and safety applications. A first implementation of the architecture is available to selected customers for architecture exploration and early prototyping.

ECC 210
article thumbnail

Peugeots Diesel 3008 Hybrid4

Green Car Congress

The 3008 HYbrid4 is powered by a 2.0-liter liter HDi FAP 120 kW (163 bhp) diesel engine with an electric motor offering a maximum power output of 27 kW (37 bhp). The design of the powertrain (engine powering the front wheels, motor powering the rear) enables 4-wheel drive, an all-electric mode, and fuel consumption of 3.8

Diesel 281
article thumbnail

Freescale introduces new automotive microcontrollers; streamlining body electronics networks and reducing vehicle weight

Green Car Congress

The level of integration these devices provide can help simplify vehicle network design, yielding reduced weight—about 20 lbs (9 kg) from an overall weight of 150 lbs of associated wiring and circuitry—increased manufacturing efficiency and reduced board sizes up to 30%.

Vehicles 210
article thumbnail

Renesas introduces new microcontrollers for sensor fusion, gateway and chassis system applications

Green Car Congress

The new chips are designed for sensor fusion, gateway, and advanced chassis system applications that will enable the types of advanced systems envisioned in the car of the future. Error check and correct (ECC) functionality detects and corrects data errors affecting memory, such as flash memory, and the internal buses.

Fusion 210
article thumbnail

NVIDIA introduces new Tesla P100 GPU accelerator for deep learning, HPC applications; NVIDIA DGX-1 deep learning supercomputer

Green Car Congress

Based on the new NVIDIA Pascal GPU architecture with five breakthrough technologies, the Tesla P100 delivers unmatched performance and efficiency to power the most computationally demanding applications. ECC protection for increased reliability. NVIDIA Pascal architecture for exponential performance leap. NVIDIA DGX-1. 3U - 3200W.

Tesla 150