Remove Energy Storage Remove Lithium Air Remove Polymer Remove Recharge
article thumbnail

IIT, Argonne team designs Li2O-based Li-air battery with solid electrolyte; four-electron reaction for higher energy density

Green Car Congress

Researchers at the Illinois Institute of Technology (IIT) and US Department of Energy’s (DOE) Argonne National Laboratory have developed a lithium-air battery with a solid electrolyte. The battery is rechargeable for 1000 cycles with a low polarization gap and can operate at high rates. —Kondori et al.

Li-ion 418
article thumbnail

New aqueous rechargeable lithium battery shows good safety, high reliability, high energy density and low cost; another post Li-ion alternative

Green Car Congress

Schematic illustration of the aqueous rechargeable lithium battery (ARLB) using the coated lithium metal as anode, LiMn 2 O 4 as cathode and 0.5 The coating of the Li metal consists of a home-made gel polymer electrolyte (GPE) and a LISICON film. Higher practical energy density. Higher energy efficiency.

Li-ion 281
article thumbnail

St. Andrews team elucidates behavior of carbon cathodes in Li-air batteries; the importance of the synergy between electrode and electrolyte

Green Car Congress

Carbon is seen as an attractive potential cathode material for aprotic (non-aqueous) Lithium-air batteries, which are themselves of great interest for applications such as in electric vehicles because of the cells’ high theoretical specific energy.

Carbon 240
article thumbnail

ARPA-E Selects 37 Projects for $106M in Funding in Second Round; Electrofuels, Better Batteries and Carbon Capture

Green Car Congress

The US Department of Energy is awarding $106 million in funding for 37 research projects selected in the second round by the DOE’s Advanced Research Projects Agency-Energy (ARPA-E). Better Batteries - Batteries for Electrical Energy Storage in Transportation (BEEST). Earlier post.). Earlier post.) Lead organization.

Carbon 249