article thumbnail

New long-duration, extended capacity Na-Al battery design for grid storage

Green Car Congress

The new battery design could help ease integration of renewable energy into the electrical grid at lower cost, using Earth-abundant metals, according to a study just published in Energy Storage Materials. The new sodium-based molten salt battery uses two distinct reactions. mAh cm −2 , a discharge duration of 28.2 Resources J.

article thumbnail

Report: Sumitomo and Kyoto University developing lower temperature molten-salt battery; about 10% the cost of Li-ion

Green Car Congress

in partnership with Kyoto University, has developed a lower temperature molten-salt rechargeable battery that promises to cost only about 10% as much as lithium ion batteries. Molten-salt batteries use highly conductive molten salts as an electrolyte, and can offer high energy and power densities.

article thumbnail

Lux Research: grid storage battery cost to fall to $500/kWh by 2022, short of expectations

Green Car Congress

Lithium-ion and molten-salt battery costs will approach $500/kWh by 2022, reducing the high capital cost of emerging grid storage technologies. Li-ion batteries are dependent on cost reductions from mass production while molten-salt batteries and VRFBs rely on long discharge durations to reduce costs.

article thumbnail

What is Home energy management system, why it is needed

Baua Electric

Here are key aspects and types of energy storage systems: Types of Energy Storage Systems: Batteries: Lithium-ion (Li-ion): Commonly used in electric vehicles and consumer electronics, Li-ion batteries are also prevalent in stationary energy storage applications.

Energy 52
article thumbnail

ARPA-E to award $30M to increase performance of solid ion conductors for batteries, fuel cells

Green Car Congress

IONICS also seeks to develop and apply methods for processing of solid ion conductors and their integration into electrochemical devices. Program Categories include: Lithium (Li) ion conductors that enable the cycling of Li metal without shorting; Selective and low-cost separators for batteries with liquid reactants (e.g.,

Li-ion 150