Green Car Congress

JANUARY 18, 2014

Temperature Combustion (LTC), (2) Dilute Gasoline Combustion, and (3) Clean Diesel Combustion. Technologies that enable LTC operation with either gasoline or diesel fuel, including control methodologies and technologies, especially for mixed?mode competitive waste heat recovery technologies. based systems for waste?heat

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

AUGUST 10, 2011

This project will optimize fuel-based control of novel combustion strategies in light- and heavy-duty vehicles to enable diesel-like efficiencies with ultra-low engine-out emissions. Increased availability of low cost carbon fiber can enable vehicle weight reduction and improvement in fuel economy. Plasan Carbon Composites.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

DECEMBER 16, 2010

The engines shall have extremely low engine-out nitrogen oxides (NO x ) and particulate matter (PM) as a target; and shall have efficiency similar to state-of-the-art direct injection diesel engines (i.e., Development of Low-Cost Carbon Fiber. High voltage and solid polymer composite electrolytes. Li/air and Li/S systems.

Li-ion 231

Li-ion Carbon Fiber Vehicles Low Cost 231

Green Car Congress

JANUARY 13, 2016

A high-efficiency heat pump absorbs the waste heat from the electrical components and a thermoelectric auxiliary heating element maintain pleasant temperatures inside the car. The higher thermal operating range enables a reduction in the balance of plant (BoP), Pint noted, as the cooling requirements are not as demanding. mi)—i.e.,

Audi 150

Audi Concept Detroit Fuel 150

Green Car Congress

NOVEMBER 17, 2015

TDI, a highly efficient, latest-generation V6 diesel engine, delivers 190 kW (258 hp) of power and 600 N·m (442.5 Making their world premiere in a diesel engine are active engine mounts in the Audi Q7 e-tron 3.0 Their outer skin is made from aluminum-coated polymer and this in turn brings weight advantages. TDI quattro.

Audi 150

Audi PHEV Diesel Fuel 150

Green Car Congress

FEBRUARY 2, 2013

Carbon Fiber Polymer Composite. Currently, polymer-film wound capacitors are commonly used in inverters for electric traction drive systems, but they cannot tolerate sufficiently high temperatures for future applications that will require operation in ambient temperatures up to 140°C.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

AUGUST 14, 2014

Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles (Area of Interest 2). This project will develop, integrate and implement predictive models for Carbon-Fiber Reinforced Polymer composites that link the material design, molding process and final performance.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299