Remove Charging Remove Concept Engine Remove Engine Remove Exhaust
article thumbnail

Grail Engine Adopts Enerpulse Pulse Plugs for Forced Semi-Homogeneous Charged Compression Ignition in Concept Two-Stroke Engine

Green Car Congress

Rendering of the Grail Engine. Grail Engine Technologies , the designer of a two-stroke engine using forced semi-homogeneous charged compression ignition (FS-HCCI) combustion, has adopted the Pulstar pulse plugs from Enerpulse ( earlier post ). Elements of the Grail Engine. Click to enlarge. Matthew Riley.

Engine 186
article thumbnail

Concept: Downsized and Supercharged Hybrid Pneumatic Engine for 30%+ Reduction in Fuel Consumption

Green Car Congress

Schematic of downsized and supercharged four-stroke hybrid pneumatic spark injection engine. The reduction in fuel consumption is obtained mainly through enabling the effective use of a heavily downsized engine, rather than from regenerative efficiency. Source: ETH Zürich. Click to enlarge. Earlier post.). Dönitz et al.

article thumbnail

New split-cycle concept to control diesel HCCI combustion

Green Car Congress

Turbocharged HCPC engine scheme. A team from Universita degli Studi di Pisa (Italy) and Rolf Reitz at the University of Wisconsin-Madison are proposing a novel combustion concept—Homogenous Charge Progressive Combustion (HCPC)—based on a split-cycle principle to control HCCI combustion in diesel-fueled engines.

Concept 318
article thumbnail

ECONAMIQ: Flexible over-expansion with cylinder deactivation can reduce ICE fuel consumption by up to 20%

Green Car Congress

Dutch start-up ECONAMIQ is developing a novel engine technology which saves up to 20% in fuel consumption. The “ECONAMIQ principle” uses flexible over-expansion in combination with cylinder deactivation technology to increase performance and efficiency without significantly changing the engine layout or architecture.

Fuel 186
article thumbnail

DOE to award $55.8M for advanced vehicle technologies; $35M for fuel cell and hydrogen

Green Car Congress

Topics addressed include: advanced batteries (including manufacturing processes) and electric drive R&D; Lightweight materials; Advanced combustion engine and enabling technologies R&D; and Fuels technologies (dedicated or dual-fuel natural gas engine technologies). turbomachinery.

Fuel 150
article thumbnail

Revolutionary engine to make debut

Green Cars News

An engine that provides vehicle manufacturers with an immediate solution for low emission legislation will make its European debut at the Engine EXPO in Stuttgart. The split-cycle engine from the Scuderi Group offers high efficiency standards without the need for large investments to modify existing production processes.

Engine 36
article thumbnail

Dalian team proposes jet controlled compression ignition to control PCCI phasing in a hybrid pneumatic engine

Green Car Congress

Researchers at the Dalian University of Technology have proposed a novel method to control premixed charge compression ignition (PCCI) phasing in internal combustion engines in all load operations. It compresses the pressurized gas produced by exhaust gas turbocharger, comprising fresh air and exhaust gas introduced from the EGR valve.

Engine 150