Remove C1 Remove Charging Remove Connect Remove Supplies
article thumbnail

Arup outfits 2 electric C1s with HaloIPT wireless charging system for Ultra-Low Carbon Vehicle Demonstrator competition

Green Car Congress

HaloIPT’s induction power technology (IPT) uses strongly coupled magnetic resonance to transfer from a primary-side power supply to a secondary-side pick-up pad with controller. To initiate charging, an electric vehicle simply has to be parked or even driven over a pad on the ground. —Neil Butcher of Arup.

Carbon 186
article thumbnail

Capacitor Working Principle, Types and Application

Baua Electric

a capacitor working principle refers to a storing of electrical energy in the form charge unit of charge is coulombs. Capacitors are available in a very wide range and sizes, but functionally all are used for storage of electrical charge. The capacitor is a device that is capable of storing electric charge +ve and -ve both.

Connect 52
article thumbnail

Capacitor Working Principle, Types and Application

Baua Electric

a capacitor working principle refers to a storing of electrical energy in the form charge unit of charge is coulombs. Capacitors are available in a very wide range and sizes, but functionally all are used for storage of electrical charge. The capacitor is a device that is capable of storing electric charge +ve and -ve both.

Connect 52
article thumbnail

Chevy Volt Delivers Novel Two-Motor, Four-Mode Extended Range Electric Drive System; Seamless Driver Experience Plus Efficiency

Green Car Congress

Two of the clutches are used to either lock the ring gear of the planetary gear-set or connect it to the generator/motor depending on the mode. The third clutch connects the internal combustion engine to the generator/motor to provide range extension capability. In this mode, the ring gear is held (locked) by clutch C1.

article thumbnail

BMW Motorrad showcases E-scooter

Green Car Congress

BMW Motorrad earlier developed an electric study vehicle, the C1-E, as a contribution to the European safety project eSUM. The steering head support is connected to it, as is the rear frame and the left-hand mounted single swing arm with directly hinged, horizontally installed shock absorber. Click to enlarge. Earlier post.).

BMW 277
article thumbnail

GM provides technical details of the Gen 2 Voltec propulsion system used in the 2016 Volt

Green Car Congress

Increased charge sustaining fuel economy. Clutches are OWC1, C1 and B1. Each motor-generator is connected with a sun gear, and a clutching device can provide reaction torque by holding the ring gear of that planetary gear set. For the second-generation, GM wanted to enhance the electric performance of the Volt. Click to enlarge.

Volt 150