Green Car Congress

JULY 10, 2010

Specifically, low cost and energy-efficient processes are sought that can be demonstrated and validated under field conditions to meet needs of the nascent algal biomass industry. Algae cultures tend to be relatively dilute, and the energy requirement to remove water from the cultures can be a significant portion of the energy balance.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

MAY 15, 2015

The projects are funded through ARPA-E’s two newest programs, Advanced Research In Dry cooling (ARID) and Accelerating Low-cost Plasma Heating and Assembly (ALPHA), which both seek to develop low-cost technology solutions. SRI will produce its STATIC cover using low-cost, scalable processing technologies.

Fusion 150

Fusion Power Powered Low Cost 150

Green Car Congress

NOVEMBER 28, 2012

sunlight through low-cost, plastic light-guiding sheets and then. If successful, the new crop would have a lower cost of. Turbo-POx For Ultra Low-Cost Gasoline. lower cost than those available today, based on a friction. Ceramatec’s design would allow for low-cost materials and.

2012 240

2012 Energy Lithium Sulfur Conversion 240

Charged EVs

SEPTEMBER 19, 2023

The CVT4EV is a continuously variable transmission with a pushbelt that Bosch says can increase the efficiency of light commercial EVs by more than 4 percent. Worse still is that the losses in a magnetic material tend to increase at an exponential rate with frequency and flux swing (typically to the 1.5-2.5 kW of loss at 9,000 RPM.

Motor 100

Motor Motors Motoring Wind 100

Green Car Congress

JULY 17, 2015

If in addition to normal electric use in homes such as lights and appliances, we charge the PHEV cars at 2 kW at the appropriate times, we could increase the utility factor of the already-installed wires in homes to more than 25%, still leaving plenty of safety margin and capacity. This bit of advanced technology can be low cost at low power.

PHEV 150

PHEV Plug-in Renewable Energy 150