Green Car Congress

JULY 10, 2009

Ignite Energy Resources supercritical water process diagram. IER’s proprietary supercritical water technology (SCW) transforms low-ranked coals, including lignite, directly into higher-valued oils and cleaner coal products. Source: IER. Click to enlarge. not via an indirect pathway (gasification) as in Fischer-Tropsch processes.

Coal 150

Coal Water Energy Australia 150

Green Car Congress

JANUARY 27, 2023

The goal of the project is to continue to develop a circular carbon economy that replaces the petroleum-based chemicals in consumer products with algae-derived and biodegradable polymers. Scale-up of Hydrothermal Liquefaction with Supercritical Water Oxidation in an Integrated Biorefinery”, $579,673. MicroBio Engineering Inc.,

Production 225

Production Carbon Conversion Mariner 225

Green Car Congress

APRIL 7, 2013

Wind Energy. Fundamental engineering research, supported by modeling and simulation studies, that leads to new processes to efficiently harness wind energy for the production of electrical power is an interest area of this program. Advanced Batteries for Transportation.

Nickel Metal Hydride 236

Nickel Metal Hydride Transportation Fuel Production 236

Green Car Congress

MAY 13, 2011

The e-gas project consists of two main components: Audi is contributing to the construction of offshore North Sea wind turbines which will generate clean power,that is then fed into the public power grid. Wind turbines are the first significant component of the Audi e-gas project. This results in a completely closed CO 2 cycle.

Audi 370

Audi Gas Hydrogen 2013 370

Green Car Congress

SEPTEMBER 9, 2011

Supplied by a series of lithium-polymer EIG batteries, the AEGT can run for about 30 minutes. Quimera is active in the following sectors: energy efficiency, energy storage, transportation, solar, wind, smart grid, biofuels & biomaterials, recycling & waste, water & wastewater.

All-Electric 210

All-Electric Carbon Fiber Polymer Energy Storage 210

Green Car Congress

OCTOBER 14, 2013

Researchers at Georgia Tech have developed an inexpensive and simple prototype of a triboelectric nanogenerator that could be used to produce energy from ocean waves by making use of contact electrification between a patterned plastic nanoarray and water. The tank is filled with deionized water. Or a surface charge density of 4.5

Georgia 210

Georgia Energy Water Environment 210

Cars That Think

NOVEMBER 1, 2023

Using built-in fuel cells, the device absorbed the lactate in the sweat and combined it with atmospheric oxygen to generate water and pyruvate. The team was inspired by self-winding watches , which have existed since the late 18th century and transform wrist movement into energy. volts for about 60 hours.

Energy 137

Energy Solar Carbon Fiber Universal 137

Green Car Congress

JANUARY 9, 2015

The new Institute for Advanced Composites Manufacturing Innovation (IACMI), announced today by President Obama, will focus on advanced fiber-reinforced polymer composites that combine strong fibers with tough plastics to yield materials that are lighter and stronger than steel. Honda R&D Americas, Inc.; TPI Composites, Inc.;

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Green Car Congress

SEPTEMBER 17, 2012

The Precourt Institute for Energy, the umbrella organization for energy research and education at Stanford, will fund the following four studies: Nanostructured Polymers for High-Performance Batteries. This project explores the use of specially designed nanostructured polymers to make high-energy, low-cost, flexible and stretchable batteries.

Energy 239

Energy Vehicles Power Powered 239

Green Car Congress

MARCH 1, 2013

When the energy required to build the e-gas facility and wind power generators is included in a comprehensive analysis, CO 2 emissions under e-Gas operation are still less than 30 grams per km (48.28 The engine is based on the new 1.4 The tanks are built with a new type of matrix.

Audi 296

Audi Gas CO2 Gas-Electric 296

Green Car Congress

DECEMBER 31, 2016

Most sources of alternative energy, such as solar, wind, and geothermal, produce electrical power while biofuels and biochemicals can directly replace petroleum-derived liquid fuels and chemicals compatible with today’s infrastructure. By 2040, through R&D, support replacing 7% of petrochemicals with bioproducts.

Transportation 207

Transportation Fuel Conversion Water 207

Green Car Congress

MARCH 7, 2017

The second layer, a composite winding of carbon fiber-reinforced polymer (CFRP) and glass fiber-reinforced polymer (GFRP), provides for maximum strength. Audi and its partners produce the fuel using renewable energies, water and CO 2 or from waste materials like straw and plant clippings. Audi e-gas.

Audi 186

Audi Gas Standards Gas-Electric 186

Green Car Congress

AUGUST 1, 2014

They often store electricity generated by rows of solar panels and wind turbines. C, causing sodium to curl up like a drop of oil in water, making the battery less efficient. A battery with a lower operating temperature can also use less expensive materials such as polymers—which would melt at 350 ?C—for

Sodium 218

Sodium Batteries Battery Energy Storage 218

Green Car Congress

MARCH 11, 2016

For Round 1, the small businesses and laboratories will collaborate on advancing a number of clean energy technologies, including water, wind, bioenergy, solar, buildings, vehicles, fuel cells, geothermal technologies, and advanced manufacturing. Water Power. Wind Power. Amsen Technologies, working with LANL. Description.

Clean 150

Clean Cleaning Energy Li-ion 150

Green Car Congress

NOVEMBER 26, 2010

However, the resulting bio-oils are typically high in oxygen, water, solids and acids. The C 6 to C 8 aromatic hydrocarbons can be high-octane gasoline additives or feedstocks for the chemical and polymer industries. The C 2 to C 6 diols can serve as feedstocks for the chemical and polymer industries. Click to enlarge.

Oil 225

Oil Convert Hydrogen Fuel 225

Green Car Congress

OCTOBER 10, 2011

to develop and test a 25 kWh prototype battery system based on nanostructured polymer electrolytes. At the core of Seeo’s technology is a novel solid polymer electrolyte material that can transport Li ions while providing inherently safe and stable support for very high energy electrode chemistries.

Li-ion 186

Li-ion Grid Energy California 186

Green Car Congress

MARCH 27, 2017

Lower panel: The CNTs and CNFs provide high conductivity and superior carbon composite lightweight structural materials for jets, bridges, wind turbines, and electric vehicle bodies and batteries. The production of synthetic fuels from carbon dioxide (and/or water) has been widely studied and can be efficient. Licht (2017).

CO2 150

CO2 Carbon Gas-Electric 2017 150

Green Car Congress

NOVEMBER 25, 2013

Renewable generation technologies, such as solar and wind, pose a fundamental challenge to centralized power generation due to variability and intermittency, ARPA-E noted. The use of such a device for liquid fuels production would depend on its chemistry and location.

Fuel 231

Fuel Power Powered Gas-Electric 231

Green Car Congress

NOVEMBER 25, 2009

Improved energy storage technologies will allow for expanded integration of renewable energy resources like wind and photovoltaic systems and will improve frequency regulation and peak energy management. Los Angeles Department of Water and Power. Tehachapi Wind Energy Storage Project. Notrees Wind Storage. 29,561,142.

Energy Storage 270

Energy Storage Grid Energy Wind 270

Green Car Congress

JULY 10, 2010

Algae cultures tend to be relatively dilute, and the energy requirement to remove water from the cultures can be a significant portion of the energy balance. saline water). Wind Technologies. Office of Fossil Energy.

Fuel 210

Fuel Motor Motors Motoring 210

Green Car Congress

JULY 31, 2009

Potential applications of xGnP include: Lighter, more fuel-efficient aircraft and car parts, and stronger wind turbines, medical implants and sports equipment. I) Exfoliated Graphite NanoPlatelets and II) Metal Nano Particles as Multifunctional Materials for Polymers and Energy Storage (Drzal). Lawrence Drzal.

Energy Storage 150

Energy Storage Energy Fuel Michigan 150

Green Car Congress

SEPTEMBER 11, 2015

Turbulence: When a flow of air or water breaks up into swirls and eddies, the pure physics equations become too complex to solve. Wind, temperature, land use and particulates such as smoke, pollen and air pollution all affect cloud formation and precipitation. The study is led by Alberto Figueroa, the Edward B. Diethrich M.D.

Universal 150

Universal Climate Michigan Engine 150

Green Car Congress

AUGUST 23, 2019

Worldwide, wind and sun supply a sufficient amount of energy, but not always at the right time. In the second step, the electrolytic splitting of carbon dioxide and water vapor takes place simultaneously. The process may be installed decentralized at locations where solar, wind or water power is available.

CO2 290

CO2 Green Power Powered 290

Green Car Congress

MARCH 10, 2018

Water flow through the membranes was 1000 times higher than predicted by Hagen-Poiseuille flow, in agreement with previous CNT membrane studies. A) SEM image of the CNT membrane surface, showing CNT tips emerging from the polymer. The CNTs used in the membranes were arc discharge nanotubes with inner diameters of 0.67 Click to enlarge.

Carbon 199

Carbon Fuel Polymer Austin 199

Green Car Congress

APRIL 29, 2015

The papers provide technical details on the high performance fuel-cell (FC) stack; specific insights into FC separator, and stack manifold; the newly developed boost converter; and the new high-pressure hydrogen storage system with innovative carbon fiber windings. Conventional flow field structure. Konno et al. Click to enlarge. Konno et al.

Congress 150

Congress Toyota Fuel Carbon Fiber 150

Green Car Congress

APRIL 12, 2015

This area currently has three areas of focus: Intermediate temperature solid oxide fuel cells; Polymer electrolyte fuel cells; and. Because solar and wind energy are intermittent, producing energy only when the sun shines or the wind blows, a method to capture and store energy for later use is needed. —Harry Tuller.

MIT 150

MIT Li-ion Batteries Battery 150

Green Car Congress

APRIL 30, 2010

Water will be the primary byproduct. A novel metal complex for electrolysis of water will be used to generate the hydrogen at high rates. By using solvents that are not compatible with water, low energy separation techniques may be used to remove the water, which would normally require an energy intensive distillation process.

Carbon 249

Carbon Batteries Battery Li-ion 249

Green Car Congress

FEBRUARY 15, 2022

The selected projects—spanning 22 states and coordinated at universities, national laboratories, and private companies—will advance technologies for a wide range of areas, including electric vehicles, offshore wind, storage and nuclear recycling. Ionomer-Free Electrodes for Ultrahigh Power Density Fuel Cells - $3,220,310.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

APRIL 10, 2012

The FOA covers 8 broad topics—Vehicles; Biomass; Hydrogen and Fuel Cell Technologies; Advanced Manufacturing; Buildings; Solar; Water; and Wind—and 30 subtopics aligned with Office of Energy Efficiency and Renewable Energy (EERE) programs. EERE is the only program Office participating in this FOA.

Hydrogen 210

Hydrogen Fuel Range Vehicles 210

Green Car Congress

MARCH 19, 2017

Polymer based composite materials are ubiquitous in our physical world. The materials comprising polymer composites are diverse. The polymer matrices can be equally varied in make-up: they can be protein or polysaccharide, as in natural composites, or fabricated from any of the myriad of commercially available polymers.

Polymer 150

Polymer Davis Standards Design 150

Green Car Congress

FEBRUARY 12, 2016

kWh Lithium Ion Polymer battery is located underneath the rear seat. Finally, the engineers eliminated the traditional 12-volt battery to reduce weight, instead, utilizing the high-voltage lithium-ion polymer battery. Furthermore, acoustic windshield glass and carefully shaped side mirrors mitigate wind noise.

Hybrid 150

Hybrid Chicago Plug-in Kia 150

Green Car Congress

NOVEMBER 9, 2011

ITM Power reported that a recently completed three-year collaboration project co-funded by the UK Technology Strategy Board (TSB) resulted in a new alkaline solid polymer membrane for an electrolyzer. The high water permeability allows considerable simplification in the water management system.

Hydrogen 218

Hydrogen Cost Of Power Powered 218

Green Car Congress

OCTOBER 26, 2009

Water (1 project). Porifera Inc will lead a team including the University of California and Lawrence Livermore National Laboratory that will integrate carbon nanotubes with polymer membranes to increase the flux of CO 2 capture membranes by up to 100x. Affordable Energy from Water and Sunlight. Direct Solar Fuels (5 projects).

Energy 231

Energy Grant Low Cost Li-ion 231

Green Car Congress

DECEMBER 17, 2016

The 16 REFUEL projects seek to develop scalable technologies for converting water and molecules from the air into energy-dense, carbon-neutral liquid fuels (CNLFs) using electrical energy from renewable sources. High-Efficiency Ammonia Production from Water and Nitrogen (Category 1). Earlier post.) hydrogen or electricity). Giner, Inc.

Carbon 150

Carbon Energy Fuel Hydrogen 150

Green Car Congress

NOVEMBER 2, 2015

On a drive along tightly winding, climbing and descending, and sometimes narrow roads, the A3 Sportback e-tron stayed planted to the pavement on its line through tight curves taken at speed. It quickly warms up the engine following a cold start, and at high load the water jacket reduces the temperature of the exhaust gas.

Audi 150

Audi Plug-in Plug Hybrid 150

Green Car Congress

NOVEMBER 20, 2014

The core of each of these individual cells is a polymer membrane, with a platinum-based catalyst on both sides of the membrane. The protons migrate through the membrane to the cathode, where they react with the oxygen present in air to form water vapor. Meanwhile, outside the stack the electrons supply the electrical power.

Audi 278

Audi Hydrogen Fuel Concept 278

Green Car Congress

AUGUST 29, 2013

Other features include a new, lighter turbocharger/cylinder head assembly; the use of lightweight polymers for the oil pan, and use of aluminum for various screws and fasteners. The exhaust manifold is water-cooled, resulting in the elimination of the use of full load enrichment—i.e., The 2014 Jetta. Driving impressions.

2014 331

2014 Engine Exhaust Fuel Economy 331