Green Car Congress

AUGUST 1, 2020

Advanced Sensing for Characterization and Sorting of Non-Recyclable Plastics Using Sensor Fusion with Artificial Intelligence. ASU’s Polymer-enhanced Cyanobacterial Bioproductivity (AUDACity). Decontamination of Non-recyclable MSW and Preprocessing for Conversion to Diesel. UHV Technologies. University of Cincinnati.

Waste 186

Waste Conversion Universal San Diego 186

Green Car Congress

NOVEMBER 11, 2009

The 2010 Ford Fusion and Mercury Milan Hybrids feature 85% post-industrial yarns and 15 percent solution-dyed yarns. The industry’s first eco-friendly cylinder head cover is currently found in the 2010 Ford Fusion and Escape vehicles. Tags: Bio-polymers Materials Sustainability. liter V-6 2010 Ford Escape. Duratec engine.

2010 246

2010 Ford Mercury Escape 246

Green Car Congress

AUGUST 6, 2014

In this, it is leveraging its experience with automotive batteries (CAEBAT, earlier post ) and fusion (IPS for ITER). ORNL is developing a computational framework to automate model generation and design optimization. Optimizing injector design. Source: Edwards, AMR 2014 presentation. Click to enlarge. ORNL/Ford/Convergent.

Engine 335

Engine GM Ford 2014 335

Green Car Congress

JUNE 24, 2010

In addition to Explorer, the Fusion, Fiesta, F-250/F-350 Super Duty, Mercury Milan and Lincoln MKZ will get soy foam by the end of 2010. One day I hope to see the automotive world go totally compostable, removing the use of petroleum-based parts 100 percent —Debbie Mielewski, Ford polymer technical leader.

2010 170

2010 Ford Mercury F-150 170

Green Car Congress

MARCH 30, 2014

Assistant professor Niels Holten-Andersen of the Department of Materials Science and Engineering and assistant professor Jeremiah Johnson of the Department of Chemistry are working to combine metallosupramolecular assembly with polymer networks to create a new class of hybrid metal-organic materials.

MIT 210

MIT Grant 2014 Energy 210

Green Car Congress

APRIL 21, 2010

The industry’s first eco-friendly cylinder head cover is used in the 2010 Ford Fusion and Escape. For example, the European Ford Focus uses recycled polymer in such components as the battery tray, wheel arch liners, seat fabric and carpets. liter Duratec engine.

Ford 218

Ford Renewable Escape Mercury 218

Green Car Congress

OCTOBER 29, 2014

The February workshop was attended by experts from industry and national laboratories representing polymer electrolyte membrane, traditional liquid alkaline, solid oxide electrolysis, alkaline exchange membrane, and reversible systems. Highlights of the workshop by topic area included: Commercial. Other Over-Road Delivery.

Hydrogen 218

Hydrogen Production Low Cost Gas-Electric 218

Green Car Congress

MAY 26, 2015

kWh Li-ion polymer that can recharge in less than three hours with a Level-Two charger. kWh Li-ion polymer pack, the HEV a 1.62 Hyundai is identifying Ford’s Fusion Energi and the Honda Accord plug-in hybrid as its PHEV competitors in the mid-size sedan segment. Fusion Energi. km) of all electric range and a 9.8

PHEV 150

PHEV 2016 Hyundai Plug-in 150

Green Car Congress

DECEMBER 2, 2009

liter Hybrid Blue Drive model featuring Hyundai’s lithium polymer battery pack. 2010 Fusion. Sonata is the first midsize sedan to adopt GDI technology as standard equipment in a naturally aspirated powertrain. Next year, Hyundai will add a 2.0-liter liter Theta II turbocharged GDI four-cylinder engine and a 2.4-liter 2011 Sonata.

2011 186

2011 Hyundai Engine Auto 186

Cars That Think

MAY 10, 2023

Technologies like nuclear fusion and quantum computing need materials that can tolerate high levels of radiation or support quantum computing while being safe, cost-effective, and sustainable. Xu and fellow Argonne scientists have used Polybot to research electronic polymers, which are plastics that can conduct electricity.

Polymer 99

Polymer North Carolina MIT Solar 99

Green Car Congress

MARCH 24, 2023

That’s why it’s important that you can do isostatic pressing at anywhere from room temperature to several thousand degrees Fahrenheit: It means you can use anything from polymers to oxides, the whole range of materials. —Ilias Belharouak Isostatic pressing has been used for decades in fusion bonding and joining materials.

Manufacturer 300

Manufacturer Batteries Battery Chad 300

Green Car Congress

FEBRUARY 2, 2013

Development of more established techniques such as conventional fusion welding, riveting, friction joining and ultrasonic joining is underway and not supported by this AOI; this AOI seeks to support early stage development and demonstration of completely new techniques. Carbon Fiber Polymer Composite.

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

MAY 30, 2018

kWh lithium-ion polymer battery pack positioned under the rear passenger seats. kWh lithium-ion polymer battery pack. kWh lithium-ion polymer battery for an estimated driving range of 124 miles. kWh lithium-ion polymer batteries, placed below the rear seats. In combination with the 1.6-liter 2019 Ioniq Electric.

2019 207

2019 Charging Lithium Ion Plug-in 207

Green Car Congress

JANUARY 1, 2018

kWh lithium-ion polymer battery. Hyundai uses a lithium-ion polymer battery pack for all Ioniq models which is 20% lighter than non-polymer lithium-ion batteries and can be shaped more optimally to the interior than standard cell format batteries. The PHEV has a 3.3

PHEV 170

PHEV 2018 All-Electric Hyundai 170

Green Car Congress

AUGUST 16, 2018

Dow Chemical Company will partner with SNL to reduce the thermal conductivity of insulating foam polyurethane products while using less polymer in its products in a project titled “Predictive Modeling of Polyurethane Foam Processes to Optimize Thermal Performance and Reduce Waste”.

Manufacturer 170

Manufacturer Batteries Battery Ozone 170

Green Car Congress

MARCH 24, 2016

The Ioniq Hybrid’s electric motor delivers an estimated 32 kW (43 horsepower) with an estimated maximum torque of 125 lb-ft (169 N·m), powered by a lithium-ion polymer battery with 1.56 kWh lithium-ion polymer battery. With sensor-fusion technology that utilizes the front radar and camera sensors, AEB operates in three stages.

New York 150

New York Hyundai PHEV Lithium Ion 150

Cars That Think

MARCH 25, 2024

The HP Jet Fusion 5200 industrial 3D printer uses an inkjet process to build parts out of nylon, polypropylene, or polyurethane. An HP Jet Fusion 5200 printed this lipstick holder [bottom]. Flexible sensors for health care monitoring have been printed using an electrically conducting polymer that responds to temperature differentials.

Personal 137

Personal Building Lithium Ion Fusion 137

Green Car Congress

APRIL 30, 2010

Lower heats of regeneration are required with these materials, since the heat of fusion during the phase change reduces the amount of energy input to release the CO 2 that is captured. A detailed synthetic study of these new compounds will aim to identify materials best suited for carbon capture applications. Research Triangle Institute.

Carbon 249

Carbon Batteries Battery Li-ion 249

Green Car Congress

FEBRUARY 21, 2017

The Ioniq Electric applies a torsion-beam rear axle, providing more space for the 28 kWh lithium-ion polymer batteries, placed below the rear seats. With sensor-fusion technology that utilizes the front radar and camera sensors, AEB operates in three stages. However, even with a much larger battery pack (8.9 kWh vs 1.58

Hyundai 150

Hyundai Plug-in PHEV Hybrid 150

Green Car Congress

JULY 14, 2015

A few examples: A polymer coating was applied to the main and connecting rod bearings; a coating of special hard materials was applied to the piston rings; and special modifications were made to the bearing shells and piston play. A fusion of brake system and motor brake. TSI for this kind of use as well.

Plug-in 150

Plug-in Plug Hybrid Europe 150