Cars That Think

JANUARY 12, 2022

Product formulations include epoxies, silicones, epoxy-polyurethane hybrids, cyanoacrylates, and UV curing compounds. Special, dual curing products have a UV tacking capability combined with a secondary heat cure mechanism for fast cures. This is a sponsored article brought to you by Master Bond.

Universal 74

Universal Tennessee 2000 Water 74

Green Car Congress

JUNE 30, 2014

The core of the springs consists of long glass fibers twisted together and impregnated with epoxy resin. In the last production step, the blank is cured in an oven at temperatures of over 100 ? Production requires far less energy than the production of steel springs. to the longitudinal axis.

Polymer 257

Polymer Audi Cleaner Light 257

Green Car Congress

JUNE 8, 2016

The purpose of the RFI is to identify future strategic research and development pathways for the DOE to pursue with potential to meet future system cost targets. Waterfall plot of the 2013 700 bar compressed hydrogen storage system cost baseline and 2015 cost status update.

Hydrogen 150

Hydrogen Polymer Vehicles Carbon Fiber 150

Green Car Congress

APRIL 21, 2016

Next month, Toyota will become the first automaker to use biohydrin, a newly-developed biosynthetic rubber product, in engine and drive system hoses. biohydrin rubber is manufactured using plant-derived bio-materials instead of epichlorohydrin, a commonly-used epoxy compound. Vacuum sensing hose production process.

Toyota 150

Toyota Engine Ozone Automobile Manufacturer 150

Green Car Congress

JANUARY 20, 2016

3M has introduced a new magnet bonding adhesive system designed to provide electric motor design and manufacturing engineers with an advanced tool for bonding permanent magnets to rotors and stators in high-efficiency permanent magnet (PM) electric motors. The adhesive can also help reduce rework and waste.

Motor 150

Motor Motors Motoring Electric 150

Green Car Congress

FEBRUARY 21, 2017

In addition to the innovation in manufacturing process, DuPont is providing a novel polyamide resin having superior toughness increased damage resistance, and an additional degree of safety compared with the current epoxy-based systems.

Gas 150

Gas Tennessee Polymer Gas-Electric 150

Green Car Congress

NOVEMBER 8, 2009

Moller International has successfully developed and tested a damage-resistant, carbon-fiber blade technology that increases durability for the ducted fans used in its Skycar and Neuera VTOL aircraft product lines. The screwdriver caused a significant notch in the leading edge of the fan but was quickly repaired with epoxy filler.

Carbon Fiber 210

Carbon Fiber International Carbon Design 210

Setec Powerr

MARCH 1, 2023

Electric vehicles urgently need high-power fast charging, and a DC charging module, as the core component of the charger, is the key to the stability and reliability of the entire Emergency mobile EV charging system. Efficiency Power conversion is the key to DC fast charging systems. Now let me introduce you to its features.

Charging 52

Charging DC Conversion Installation 52

Green Car Congress

AUGUST 7, 2020

REPAIR teams will develop technology that enables gas utilities to update their distribution systems at low cost and continue to reliably service commercial and residential gas delivery needs nationwide. with advanced robotics systems to create an in-pipe map. —ARPA-E Director Lane Genatowski. University of Maryland.

Gas 297

Gas Gas-Electric Universal Colorado 297

Green Car Congress

FEBRUARY 2, 2019

Furthermore, the resulting low temperature level within the machine makes it possible to use more inexpensive and high-production process-oriented materials in the region of housing parts. The stators themselves are overmolded with a thermally conductive epoxy resin molding compound in a transfer molding process.

Polymer 322

Polymer Motor Motors Motoring 322

Green Car Congress

FEBRUARY 4, 2014

Additive Manufacturing (AM) systems and services company EOS and Airbus Group Innovations (previously EADS Innovation Works) recently completed an environmental lifecycle comparison of two key production technologies: conventional rapid investment casting and Direct Metal Laser Sintering (DMLS).

Manufacturer 199

Manufacturer Design Building Parts 199

Green Car Congress

MARCH 1, 2013

When the A3 Sportback g-tron is powered by Audi e-gas, no more CO 2 is released than was chemically input in its production beforehand, creating a closed loop. Key modifications relate to the cylinder head, turbocharging, injection system, and the catalytic converter. The engine is based on the new 1.4

Audi 296

Audi Gas CO2 Gas-Electric 296

Green Car Congress

APRIL 18, 2011

Evonik’s products have been successfully used in the lightweight design of vehicles, such as ROHACELL foam core for sandwich structure of hatch back, PLEXIGLAS for automotive glazing, VESTAMELT adhesion promoter for structural hybrid parts, etc. Evonik also provides solutions for tires, tubing systems and powertrain.

2011 210

2011 Auto Carbon Vehicles 210

Green Car Congress

SEPTEMBER 7, 2016

The second generation comes with a completely reengineered suspension, high-performance drives and innovative driver assistance systems. Epoxy resin is used to bind the fiber reinforced materials. This method enables the brand with the four rings to transform surplus renewable energy into a storable product.

Audi 150

Audi Gas Gasoline Available 150

Green Car Congress

MAY 20, 2013

Hierarchical carbon fibers (CFs) sheathed with radial arrays of carbon nanotubes (CNTs) are promising candidates for improving the intra- and interlaminar properties of advanced fiber-reinforced composites (such as graphite/epoxy) and for high-surface-area electrodes for battery and supercapacitor architectures, the authors note.

Carbon Fiber 199

Carbon Fiber Carbon MIT Polymer 199

Green Car Congress

JUNE 29, 2015

The standard, start-stop system has also been further improved and comes with new features to reduce fuel consumption further: When the driver stops at a red light, the engine can already be deactivated below 7 kilometers an hour (4 mph); 3 km/h for the A4 3.0 TDI with tiptronic (1.9 Power and torque for the 2.0 In the first version, the 3.0

Audi 150

Audi Gas Engine MPH 150

Green Car Congress

SEPTEMBER 12, 2011

Via its broad product portfolio, BASF is able to investigate three different plastic matrix systems (polyurethane, epoxy and polyamide chemistries) simultaneously and intends to develop tailor-made formulations in close cooperation with customers. Multimaterial systems.

Industrial 199

Industrial Industry Carbon Fiber Carbon 199

Green Car Congress

JULY 14, 2015

Sustainable Production of Ethanol and Green Crude. This has led to improved biofuel productivity, higher economic returns, minimal waste production, and a lower carbon footprint. Algenol has demonstrated about 15–20 times the productivity of corn-based ethanol on a per acre basis.

EPA 150

EPA Green Polymer Water 150

Green Car Congress

JULY 31, 2017

The four teams and their projects are: Arconic , an engineered material supplier, and PNNL will partner to develop a metal-ceramic composite brake system. Carbon fiber reinforced epoxy application will help achieve these desired targets.

Carbon Fiber 150

Carbon Fiber Vehicles Idaho Carbon 150

Green Car Congress

APRIL 10, 2014

ExxonMobil, Corning and Toyota have collaborated to develop an Onboard Separation System (OBS) to optimize gasoline engine efficiency and performance. The system, say the researchers, offers the potential to exploit most of the benefits of operating on premium high octane fuel while using less expensive regular grade more effectively.

Gasoline 316

Gasoline Engine Toyota Fuel Economy 316

Green Car Congress

NOVEMBER 17, 2014

For the near-term, the focus is on improving performance and lowering the cost of high-pressure compressed hydrogen storage systems. For the long-term, the effort is on developing advanced cold/cryo-compressed and materials-based hydrogen storage system technologies. kWh/kg system (5.5 kWh/L system (0.040 kg H 2 /L). $10/kWh

Hydrogen 225

Hydrogen Carbon Fiber 2014 St. Louis 225

Cars That Think

OCTOBER 1, 2021

Since its introduction in 1978, Master Bond EP29LPSP has been the epoxy compound of choice in a variety of challenging applications. If an adhesive, coating, or potting compound fails, the product fails. Systems and methods for controlling the gas conversion in a fiber-optic gyroscope." 2 Lee, David, et al. US Patent 8,347,722.

Engine 63

Engine 2000 Stimulus Wind 63

Green Car Congress

SEPTEMBER 1, 2011

Some of the materials and technologies are still at a laboratory stage, while others have a realistic chance of entering series production. The smart forvision features the first all-plastic wheel suitable for high-volume production. Here, several innovative products are combined with one another for the first time.

Design 246

Design Concept Energy Electric Vehicles 246

Green Car Congress

JUNE 17, 2013

E-Thrust is a “series hybrid” electrical distributed propulsion system concept using one gas power unit providing the electrical power for six fans for lower fuel consumption, fewer emissions and less noise. EADS is also cooperating with Rolls-Royce on a future distributed propulsion system concept (DEAP) for full-size passenger aircraft.

Hybrid 334

Hybrid Re-Charge Electric Electrical 334

Charged EVs

MAY 18, 2021

As EV-makers continue to upgrade from 400 V to 800 V systems, parts suppliers have been hustling to keep up with the new specs. Looking back just 10 or 15 years, there wasn’t much of a need for these products in the automotive market. Charged : What makes high-voltage capacitors fundamentally different than the lower-voltage products?

Volt 56

Volt Parts Auto Industry Charging 56