Remove Convert Remove Oil Remove Polymer Remove Waste
article thumbnail

U Delaware team develops chemocatalytic process to convert waste polypropylene to lube oils

Green Car Congress

They were able to convert amorphous polypropylene and everyday bags and bottles effectively to lubricants with yields up to 80+%. Quantification of critical properties, including pour point, kinematic viscosity, and viscosity index, indicates that the products are promising alternatives to currently used base or synthetic oils.

Delaware 435
article thumbnail

ETH Zurich catalyst can convert polypropylene directly into motor oil with high selectivity

Green Car Congress

With tuning, the catalyst can achieve a selectivity of 80% toward motor oil (C 21 –C 45 ). The recycling of plastic waste plays a large conceptual role in the quesst for the realization of a circular economy. Polypropylene constitutes about 30% of all plastic waste. A paper on their work is published in ChemSusChem.

Oil 389
article thumbnail

Audi and KIT working on recycling for automotive plastics via pyrolysis oil

Green Car Congress

Whereas plastics of the same type can often be mechanically recycled, recycling of mixed plastic waste poses a major challenge. These plastic components are processed into pyrolysis oil by chemical recycling. In the medium run, components made from pyrolysis oil can be used again in automobiles.

Kits 410
article thumbnail

EU research project IDEALFUEL seeks to develop marine low-sulfur heavy fuel oils from biomass; Bio-HFO

Green Car Congress

In an EU-funded research project, an international consortium is aiming to develop new production methods for sustainable marine fuels to replace heavy fuel oils in shipping. IDEALFUEL seeks to develop methods to convert woody residual and waste materials such as sawdust and wood chips into renewable marine fuels.

Mariner 273
article thumbnail

Researchers develop relatively low-temp process to convert low-density polyethylene waste to liquid fuel

Green Car Congress

Researchers in India have developed a relatively low-temperature process to convert low-density polyethylene (LDPE)—a common polymer used to make many types of container, medical and laboratory equipment, computer components and plastic bags—into liquid fuel over a kaolin catalyst. of Environment and Waste Management Vol.

Waste 218
article thumbnail

Dalian team devises two-step method for synthesis of jet-range polycycloalkanes under mild conditions from plastic waste

Green Car Congress

Researchers at the Dalian Institute of Chemical Physics in China report a two-step method for the synthesis of jet-fuel-range high-density polycycloalkanes from polycarbonate waste under mild conditions. Plastics are a family of organic polymers which are widely used in our life. Since 1950s, about 6.3 Tang et al.

Waste 207
article thumbnail

PNNL biocrude-to-diesel demo passes 2,000-hour catalyst stability milestone

Green Car Congress

A large-scale demonstration converting biocrude to renewable diesel fuel has passed a significant test, operating for more than 2,000 hours continuously without losing effectiveness. The biocrude oil came from many different sources, including wastewater sludge from Detroit, and food waste collected from prison and an army base.

Diesel 332