Green Car Congress

MAY 26, 2022

Lilium, developer of an all-electric vertical take-off and landing (eVTOL) jet, is partnering with Honeywell and DENSO, who will co-develop and manufacture the Lilium Jet’s electric motor that will power the Lilium Jet’s engines. This lowers the component’s weight, manufacturing costs and susceptibility to foreign object damage.

Design 221

Design Manufacturer Motor Motors 221

Green Car Congress

APRIL 17, 2015

Ford and DowAksa signed a joint development agreement (JDA) formally to advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter. DowAksa is expanding on Aksa’s existing carbon fiber production assets.

Carbon Fiber 150

Carbon Fiber Carbon Ford Light 150

Green Car Congress

MARCH 8, 2016

Continental Structural Plastics (CSP) has signed a memorandum of understanding with Mitsubishi Rayon (MRC), regarding the development and manufacturing of innovative carbon fiber structural components for the automotive industry in North America. Also key was reducing the cycle time associated with the use of carbon fiber.

Carbon Fiber 150

Carbon Fiber Carbon Mitsubishi North America 150

Green Car Congress

MAY 14, 2023

Ford Pro, the company’s commercial vehicle (CV) and services division, will use the pilot to expand its conversion expertise, supported by on-site engineers and E-Transit specialists from the company’s Dagenham site and Dunton Technical Centre, in Essex, UK.

Hydrogen 434

Hydrogen Ford Fuel Carbon Fiber 434

Green Car Congress

JANUARY 12, 2015

Ford and DowAksa are accelerating joint research to develop high-volume manufacturing techniques for automotive-grade carbon fiber, aiming to make vehicles lighter for greater fuel efficiency, performance and capability. Ford and Dow Chemical began working together in 2012 to develop low-cost, high-volume carbon fiber composites.

Carbon Fiber 150

Carbon Fiber Carbon Parts Ford 150

Green Car Congress

APRIL 12, 2012

Ford Motor Company is partnering with Dow Automotive Systems, a business unit of The Dow Chemical Company, to research the use of advanced carbon fiber composites in high-volume vehicles. Carbon fiber composites have been used in aerospace and racing cars for decades due to their unique combination of high strength and low mass.

Carbon Fiber 247

Carbon Fiber Carbon Ford Vehicles 247

Green Car Congress

FEBRUARY 24, 2023

Supported by a grant from the Niche Vehicle Network, supported by the Department for Transport and Innovate UK, the project will adapt the design of the Yamaha Tricity 300 to replace its combustion engine with a fully electric powertrain with fast-charging capability and a targeted 100 mile operating range.

Motorcycles 397

Motorcycles Fully Electric Concept Electric Motorcycles 397

Green Car Congress

APRIL 6, 2021

Cornell researchers led by Lynden Archer, the Joseph Silbert Dean of Engineering and the James A. Friend Family Distinguished Professor of Engineering, have been exploring the use of low-cost materials to create rechargeable batteries that will make energy storage more affordable. They also have a very long cycle life.

Batteries 454

Batteries Battery Carbon Fiber Lithium Ion 454

Green Car Congress

APRIL 7, 2022

Ultimately, SpinLaunch’s Orbital Accelerator will accelerate a launch vehicle containing a satellite up to 5,000 miles per hour using a rotating carbon-fiber-arm within a 300-ft diameter steel vacuum chamber. After full review, NASA and SpinLaunch will publish all non-proprietary launch environment information from the test flight.

Low Cost 259

Low Cost Carbon Fiber New Mexico Google 259

Green Car Congress

MAY 20, 2022

It uses no rare-earth elements, which helps to reduce its carbon footprint and create a responsible and sustainable ecosystem. It is two times lighter, smaller and costs less than a battery for a similar electric vehicle. The engine is at the rear, so there is enough space for the 2.5

Hydrogen 482

Hydrogen Carbon Concept Hybrid 482

Green Car Congress

JANUARY 18, 2014

As described in multiple DOE reports, the main barriers to widespread PEV commercialization are the cost; performance and life; and abuse tolerance of high?energy Specifically: the current cost of high?energy board charger must be offset by the cost savings in operational costs as seen by the customer. energy batteries.

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

NOVEMBER 8, 2009

Moller International has successfully developed and tested a damage-resistant, carbon-fiber blade technology that increases durability for the ducted fans used in its Skycar and Neuera VTOL aircraft product lines. Carbon fiber has up to seven times the tensile strength of aluminum. Earlier post.).

Carbon Fiber 210

Carbon Fiber International Carbon Design 210

Green Car Congress

AUGUST 21, 2014

The newly selected projects are in five areas: energy storage; power electronics and electric motors (PEEM); advanced combustion engines; materials technologies, and fuels and lubricant technologies. A Commercially Scalable Process for Silicon Anode Prelithiation his project will develop a cost- effective and scalable pre- lithiation process.

Engine 231

Engine Carbon Fiber Fuel Batteries 231

Green Car Congress

DECEMBER 11, 2018

The team projects that reasonable estimates for production costs and loss of performance due to system implementation result in total energy storage costs roughly 5 times cheaper than those for 700 bar tanks, potentially opening doors for increased adoption of hydrogen as an energy vector. wt% and 50 kgH 2 /m 3 for 5 kg of hydrogen.

Hydrogen 276

Hydrogen Energy Storage Carbon Fiber Store 276

Green Car Congress

OCTOBER 30, 2009

SGL Group and BMW Group have formed a 51:49 joint venture to manufacture carbon fibers and fabrics for the automotive industry. The joint venture will be operated through two companies, one based in North America (SGL Automotive Carbon Fibers LLC), and the other in Germany (SGL Automotive Fibers GmbH & Co KG).

Carbon Fiber 186

Carbon Fiber BMW Carbon Mitsubishi 186

Green Car Congress

OCTOBER 25, 2014

Mercedes-Benz received two MATERIALICA Design and Technology Awards at the MATERIALICA 2014 trade fair for materials applications, surface technology and product engineering in Munich. The first was for the new steel pistons for diesel engines ( earlier post ), the second for high-strength carbon-fiber reinforced plastic (CFRP) struts.

Mercedes 262

Mercedes Carbon Fiber Diesel Cars 262

Green Car Congress

AUGUST 13, 2012

These projects include the development and validation of modeling tools to deliver higher performing carbon fiber composites and advanced steels, as well as research into new lightweight, high-strength alloys for energy-efficient vehicle and truck engines. Predictive Engineering Tools for Injection?Molded Description.

Carbon Fiber 231

Carbon Fiber Carbon United States Fuel Economy 231

Green Car Congress

AUGUST 15, 2019

Toray Advanced Composites will produce high quality and affordable CFRT tapes using Ultramid engineering thermoplastics developed and produced by BASF. The fiber manufacturer will reinforce BASF’s Ultramid PA6 (Polyamide) resins with either glass fiber or with carbon fiber.

Supplies 191

Supplies Industrial Industry Carbon Fiber 191

Green Car Congress

DECEMBER 10, 2020

The team at the Advanced Technologies Center currently includes 5 engineers and designers. CSP’s Advanced Technology Department, in combination with R&D and Product Development, comprises more than 80 engineers, designers and scientists. Reduced tooling cost. 750-ton press with vacuum. 400-ton press w/ 10' bed.

Batteries 221

Batteries Battery Carbon Fiber Michigan 221

Green Car Congress

OCTOBER 22, 2020

Teijin has joined the AZL Partner Network for Lightweight Production Technology , a cross-industry network for joint business development and technology development organized by service and engineering provider AZL Aachen GmbH and involving nine institutes and some 80 companies in the field of lightweight production. © AZL Aachen GmbH.

Czech Republic 221

Czech Republic Production Carbon Fiber Portugal 221

Green Car Congress

NOVEMBER 13, 2020

Lightweighting has been a key tool for improving the fuel economy of internal combustion engine (ICE) vehicles over the past years. However, the transition from ICEs to BEVs changes both the goals and the design considerations around lightweighting, Lux says. Much of the drive to lightweight BEVs comes from a desire to extend range.

Electric Vehicles 243

Electric Vehicles Batteries Battery Vehicles 243

Green Car Congress

DECEMBER 15, 2016

million, subject to appropriations, to support research and development of advanced vehicle technologies, including batteries, lightweight materials, and advanced combustion engines, as well as innovative technologies for energy efficient mobility. Battery500 Seedling Projects. DOE envisions two project phases.

Carbon Fiber 150

Carbon Fiber Low Cost Vehicles Li-ion 150

Green Car Congress

APRIL 30, 2018

This next-generation concept truck features a custom, aerodynamic design and aims to demonstrate improvements in fuel economy for Class 8 trucks. Special Starship features include: Bespoke 100% hyper-aerodynamic carbon fiber cab. to flow through the radiator and into the engine compartment, allowing cooling. consumption.

San Diego 281

San Diego Fuel Jacksonville Fuel Economy 281

Green Car Congress

SEPTEMBER 16, 2020

TFSI engine produces 96 kW (131 PS) and generates 200 N·m (147.5 With its abbreviated compression phase and long expansion phase, it was designed specifically for operation at partial load. The cylinder head, injection system, turbocharger and catalytic converter were modified accordingly for the CNG engine.

Audi 504

Audi Gas Gas-Electric Gasoline-Electric 504

Teslarati

JANUARY 18, 2023

At the time, the company shared photos of early work on prototypes of smaller Neutron structural elements, as well as progress building the giant molds that will be used to ‘lay up’ the rocket’s carbon fiber composite tanks and airframe. Neutron measures 42.8 meters (140.4 ft) tall and up to seven meters (23 ft) wide.

Carbon Fiber 126

Carbon Fiber Virginia Carbon Building 126

Green Car Congress

JUNE 9, 2017

million for 30 new projects aimed at discovery and development of novel, low-cost materials necessary for hydrogen production and storage and for fuel cells onboard light-duty vehicles. Precursor Development for Low-Cost, High-Strength Carbon Fiber. PGM-free Engineered Framework Nano-Structure Catalysts.

Hydrogen 170

Hydrogen Carbon Fiber Fuel Low Cost 170

Green Car Congress

APRIL 23, 2020

The configurator shows how ArcelorMittal’s range of advanced high strength steels (AHSS) and smart solutions can be deployed to meet the lightweighting, safety, cost, and sustainability performance targets of BEV producers. Lightweighting emerges as a major factor in BEV design. —Jérôme Favero. —Jérôme Favero.

Carbon Fiber 365

Carbon Fiber Emissions Carbon Batteries 365

Green Car Congress

JULY 12, 2017

million to 22 new cost-shared projects to accelerate the research of advanced battery, lightweight materials, engine emission control technologies, and energy efficient mobility systems (EEMS). An additional two projects will research and develop novel emission control strategies for advanced combustion engines. Earlier post.)

Carbon Fiber 150

Carbon Fiber Li-ion Mercedes GM 150

Green Car Congress

APRIL 10, 2011

Theodore and Associates is unveiling the Uni-Chassis, a frameless body-on-chassis design that is lighter in weight, lower investment and lower cost compared to traditional body-on-frame and unibody designs, at the 2011 SAE World Congress in Detroit this week. degree torsional stiffness and 47,000 lb.

Plug-in 199

Plug-in Plug Shelby Hybrid 199

Green Car Congress

APRIL 4, 2015

Japan, have developed a cylinder casing for a one-cylinder research engine using a fiber-reinforced composite material. Lars-Fredrik Berg, who is the project leader and manager of the research area Lightweight Powertrain Design at the Fraunhofer Project Group for new drive systems. Click to enlarge.

Engine 150

Engine Carbon Fiber Parts Japan 150

Green Car Congress

NOVEMBER 15, 2021

jointly announced that, toward the achievement of carbon neutrality, they will take on the challenge of expanding fuel options through the use of internal combustion engines at the (three-hour) Super Taikyu Race in Okayama on 13-14 November. Continuing to race using hydrogen engines. Kawasaki Heavy Industries, Ltd.,

Mazda 387

Mazda Hydrogen Toyota Transportation 387

Green Car Congress

MARCH 7, 2013

will optimize the cost and performance of composite cylinders for hydrogen storage using a graded construction. Current state-of-the-art hydrogen storage vessels for fuel cell electric vehicles are cost prohibitive because of the necessary carbon fiber. Composite Technology Development, Inc. Nextgen Aeronautics, Inc.

Hydrogen 218

Hydrogen Carbon Fiber Transportation Fuel 218

Green Car Congress

MAY 30, 2017

The first all-electric pickup truck designed and tested in Canada, Havelaar’s Bison is built for tough Canadian weather conditions and challenging terrain. The Bison features a carbon fiber reinforced steel space frame, with class-leading torsional stiffness for enhanced durability and handling.

Canada 150

Canada Carbon Fiber Batteries Battery 150

Green Car Congress

SEPTEMBER 7, 2021

In addition to a progressive design, the extremely low-slung, all-electric competition car features the characteristic lines of the sports cars from Stuttgart-Zuffenhausen. In 2018, a team of Porsche engineers and technicians in Zuffenhausen and Weissach began to develop extremely powerful and highly efficient electric motors.

Porsche 417

Porsche Concept Cars Electric 417

Green Car Congress

AUGUST 10, 2011

The selections announced focus on eight approaches to improving vehicle efficiency: Advanced fuels and lubricants : Eight projects awarded to improve fuels and lubricants that will enable optimal performance of advanced combustion engines. Wisconsin Engine Research Consultants LLC. Advanced fuels and lubricants. Grantee Description.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

MARCH 6, 2019

The module is made from carbon fiber sheet molded compound (SMC), glass fiber SMC and unidirectional glass fiber reinforced plastics (GFRP) to offer both high strength and low weight. The company has operations on three continents and more than 4,200 employees.

Light 191

Light Carbon Fiber Michigan 2019 191

Baua Electric

JANUARY 19, 2024

Honda emphasized that thin, light, and wide is its technical approach with the 0 Series, and it starts by reducing the battery height at the bottom of the vehicle by about 10%, boasted Daisuke Tsutamori, the creative director and general manager for Honda R&D’s e-Mobility Design Division. Honda 0 Saloon concept No carbon fiber.

Honda 52

Honda Carbon Fiber Concept Las Vegas 52