Baua Electric

MARCH 20, 2024

In the world of electric bikes, the words “carbon fiber” usually means big bucks. That means carbon fiber electric bikes have always commanded premium prices – at least, until now. But just because it’s a lower-cost bike doesn’t mean it’s cheap. That’s a featherweight in the e-bike world, believe it or not.

Carbon Fiber 52

Carbon Fiber Carbon Cheap MPH 52

Green Car Congress

MARCH 14, 2017

in cooperation with Ford Motor Company, developed a prototype carbon fiber composite subframe which reduces mass by 34% compared to making a stamped steel equivalent. The design has passed all performance requirements based on computer-aided engineering (CAE) analyses.

Carbon Fiber 247

Carbon Fiber Carbon Ford Shelby 247

Green Car Congress

DECEMBER 15, 2017

Researchers at the Department of Energy’s Pacific Northwest National Laboratory, along with experts from industry and academia, have developed predictive engineering tools for designing new, economical, and lightweight automotive composites. This approach should speed the development of more economical carbon fiber materials.

Carbon Fiber 150

Carbon Fiber Carbon Affordable Virginia 150

Green Car Congress

OCTOBER 9, 2012

At the Composites Europe event in Dusseldorf, Ford Motor Company displayed a prototype carbon fiber reinforced plastic (CFRP) hood. Carbon fiber offers a very high strength-to-weight ratio; it is up to five times as strong as steel, twice as stiff, and one-third the weight. Earlier post.)

Carbon Fiber 294

Carbon Fiber Carbon Ford Downsizing 294

Green Car Congress

APRIL 11, 2014

Danish start-up ECOmove has developed a technology which it says makes it possible to manufacture a carbon-fiber chassis without using special equipment. ECOmove calls its carbon-fiber technology Qstrung. The first unit has already been shipped to a company in Germany. Click to enlarge.

Carbon Fiber 225

Carbon Fiber Carbon 2009 Manufacturer 225

Green Car Congress

APRIL 24, 2017

Mitsubishi Rayon (MRC) (which is now consolidated into Mitsubishi Chemical , along with Mitsubishi Plastis and the former Mitsubishi Chemical) recently announced that its carbon fiber sheet molding compound (SMC) has been adopted for the rear hatch frame of the new Toyota Prius PHV. Fast speed is not as necessary for initial adoption.

Carbon Fiber 150

Carbon Fiber Mitsubishi Prius Carbon 150

Green Car Congress

OCTOBER 19, 2020

The team projects that the high-efficiency vehicle will have a a minimum unit cost of only $1,400 to produce—the price of an average mountain bike—once the funding goal is reached. The VEGAN is a lightweight multipurpose hybrid electric-self-charging solar tricycle. The team has not yet produced a working demo for their concept.

Pakistan 418

Pakistan Low Cost Solar Carbon Fiber 418

Green Car Congress

AUGUST 18, 2016

and Purdue University, has launched the first project selected with a dual focus on decreasing the cost of manufacture and increasing design flexibility for automotive composites. Multiple factors, including cost and design constraints, present barriers to the adoption of composites in high volume automotive applications.

Carbon Fiber 150

Carbon Fiber Carbon Tennessee Universal 150

Green Car Congress

APRIL 17, 2015

Ford and DowAksa signed a joint development agreement (JDA) formally to advance research on cost-effective, high-volume manufacturing of automotive-grade carbon fiber, a material poised to play a significant role in the drive to make vehicles lighter. DowAksa is expanding on Aksa’s existing carbon fiber production assets.

Carbon Fiber 150

Carbon Fiber Carbon Ford Light 150

Teslarati

JANUARY 15, 2024

A Tesla Model Y owner has created what is arguably one of the most useful DIY accessories ever designed for a mainstream electric car. Using some clever DIY strategies and conventional solar panels, the Model Y owner was able to design a system that allows his all-electric crossover to charge from the sun while it’s parked outside.

Solar 124

Solar Carbon Fiber DIY Miles 124

Green Car Congress

MARCH 8, 2016

Continental Structural Plastics (CSP) has signed a memorandum of understanding with Mitsubishi Rayon (MRC), regarding the development and manufacturing of innovative carbon fiber structural components for the automotive industry in North America. Also key was reducing the cycle time associated with the use of carbon fiber.

Carbon Fiber 150

Carbon Fiber Carbon Mitsubishi North America 150

Green Car Congress

JANUARY 12, 2015

Ford and DowAksa are accelerating joint research to develop high-volume manufacturing techniques for automotive-grade carbon fiber, aiming to make vehicles lighter for greater fuel efficiency, performance and capability. Ford and Dow Chemical began working together in 2012 to develop low-cost, high-volume carbon fiber composites.

Carbon Fiber 150

Carbon Fiber Carbon Parts Ford 150

Green Car Congress

SEPTEMBER 27, 2013

Zoltek is a large two carbon fiber manufacturer; large tow carbon fiber is carbon fiber with 40,000 or more filaments applied for applications such as wind turbine blades and reinforced plastics compounds, and is produced on modified acrylic staple fiber production lines for textiles. per share).

Carbon Fiber 199

Carbon Fiber Wind Carbon Hungary 199

Green Car Congress

JUNE 22, 2015

The ThyssenKrupp Carbon Components – Maxion Wheels team will work with OEMs to develop custom solutions to meet their specific needs. Maxion Wheels and ThyssenKrupp Carbon Components will continue to enhance the value proposition of the lightweight aluminum and carbon fiber hybrid wheels.

Carbon Fiber 150

Carbon Fiber Carbon Hybrid SUV 150

Green Car Congress

APRIL 12, 2012

Ford Motor Company is partnering with Dow Automotive Systems, a business unit of The Dow Chemical Company, to research the use of advanced carbon fiber composites in high-volume vehicles. Carbon fiber composites have been used in aerospace and racing cars for decades due to their unique combination of high strength and low mass.

Carbon Fiber 247

Carbon Fiber Carbon Ford Vehicles 247

Green Car Congress

MAY 26, 2022

An air-cooled design offers structural simplicity and ease of maintenance compared with traditional liquid cooling systems, and therefore has the potential to reduce aircraft operating costs significantly. The e-motor has its rotor and stator in a centrifugal or radial configuration, compared to traditional axial designs.

Design 221

Design Manufacturer Motor Motors 221

Green Car Congress

MARCH 9, 2015

On the basis of the now-complete material research, the transfer of the special systems made from carbon fibers and matrices into specific applications of customers in the automotive industry is now under way. The composite is based on a reactive polyamide system and compatible carbon fibers.

Carbon Fiber 150

Carbon Fiber Carbon 2012 Manufacturer 150

Green Car Congress

SEPTEMBER 10, 2011

Toray has teamed up with Gordon Murray Design (creator of the T.27 27 city EV, earlier post ) to create the T-Wave AR1, a concept EV two-seater to demonstrate the extreme weight savings possible with Toray’s carbon fiber composites. Although it is a concept car, the existing design could be homologated for road use.

Carbon Fiber 210

Carbon Fiber Carbon Concept Cars 210

Green Car Congress

OCTOBER 10, 2021

These conductivity-enhanced materials have the potential to lower the costs and impacts of adding renewables and electric cars to the grid, maximize next-generation energy storage technologies, and support electrification for energy-intensive sectors.

Manufacturer 320

Manufacturer Carbon Fiber Affordable Carbon 320

Green Car Congress

MAY 14, 2023

Other partners on the project are bp, capturing hydrogen usage and infrastructure requirements; Cambustion , testing the fuel cell system; Viritech , designing hydrogen storage systems; and Cygnet Texkimp , providing the pressure vessels’ carbon fiber tooling.

Hydrogen 434

Hydrogen Ford Fuel Carbon Fiber 434

Green Car Congress

APRIL 7, 2022

Ultimately, SpinLaunch’s Orbital Accelerator will accelerate a launch vehicle containing a satellite up to 5,000 miles per hour using a rotating carbon-fiber-arm within a 300-ft diameter steel vacuum chamber. After full review, NASA and SpinLaunch will publish all non-proprietary launch environment information from the test flight.

Low Cost 259

Low Cost Carbon Fiber New Mexico Google 259

Green Car Congress

FEBRUARY 24, 2023

Supported by a grant from the Niche Vehicle Network, supported by the Department for Transport and Innovate UK, the project will adapt the design of the Yamaha Tricity 300 to replace its combustion engine with a fully electric powertrain with fast-charging capability and a targeted 100 mile operating range.

Motorcycles 397

Motorcycles Fully Electric Concept Electric Motorcycles 397

Green Car Congress

APRIL 6, 2010

SGL Automotive Carbon Fibers LLC, the joint venture between SGL Group and BMW Group ( earlier post ), will build a carbon fiber manufacturing plant in Moses Lake, WA. In the next step, the facility in Moses Lake will convert the polyacrylic fibers into the actual carbon fibers.

Carbon Fiber 220

Carbon Fiber BMW Carbon Building 220

Green Car Congress

APRIL 6, 2021

Friend Family Distinguished Professor of Engineering, have been exploring the use of low-cost materials to create rechargeable batteries that will make energy storage more affordable. This magnified image shows aluminum deposited on carbon fibers in a battery electrode. A paper on the work is published in Nature Energy.

Batteries 454

Batteries Battery Carbon Fiber Lithium Ion 454

Green Car Congress

NOVEMBER 8, 2009

Moller International has successfully developed and tested a damage-resistant, carbon-fiber blade technology that increases durability for the ducted fans used in its Skycar and Neuera VTOL aircraft product lines. Carbon fiber has up to seven times the tensile strength of aluminum. Earlier post.).

Carbon Fiber 210

Carbon Fiber International Carbon Design 210

Green Car Congress

JANUARY 24, 2011

and Daimler AG are forming a joint venture in Esslingen, Germany, for manufacturing and marketing of Carbon Fiber Reinforced Plastics (CFRP) automobile parts. The move towards adoption of carbon fiber is expected to soon gain momentum as a solution for significantly reducing the automobile body weight.

Carbon Fiber 218

Carbon Fiber Automobile Parts Carbon 218

Green Car Congress

JANUARY 16, 2015

Researchers from Nanjing Forestry University and the University of Maryland have designed high-performance microfibers by hybridizing two-dimensional (2D) graphene oxide (GO) nanosheets and one-dimensional (1D) nanofibrillated cellulose (NFC) fibers. —Li et al. (a) 2014.111.

Carbon Fiber 150

Carbon Fiber Li-ion Hybrid Carbon 150

Green Car Congress

OCTOBER 30, 2009

SGL Group and BMW Group have formed a 51:49 joint venture to manufacture carbon fibers and fabrics for the automotive industry. The joint venture will be operated through two companies, one based in North America (SGL Automotive Carbon Fibers LLC), and the other in Germany (SGL Automotive Fibers GmbH & Co KG).

Carbon Fiber 186

Carbon Fiber BMW Carbon Mitsubishi 186

Green Car Congress

MAY 20, 2022

It uses no rare-earth elements, which helps to reduce its carbon footprint and create a responsible and sustainable ecosystem. It is two times lighter, smaller and costs less than a battery for a similar electric vehicle. Its interior design is a forward-looking study of future Renault interiors.

Hydrogen 482

Hydrogen Carbon Concept Hybrid 482

Green Car Congress

DECEMBER 11, 2018

The team projects that reasonable estimates for production costs and loss of performance due to system implementation result in total energy storage costs roughly 5 times cheaper than those for 700 bar tanks, potentially opening doors for increased adoption of hydrogen as an energy vector. wt% and 50 kgH 2 /m 3 for 5 kg of hydrogen.

Hydrogen 276

Hydrogen Energy Storage Carbon Fiber Store 276

Green Car Congress

NOVEMBER 18, 2009

Specifically, the funding will go toward reducing the production cost of carbon fiber manufacturing, to help in reducing the weight of vehicles; improved efficiency and lower costs for car batteries; and net-zero energy building technologies. ORNL will also receive $20.2

Carbon Fiber 199

Carbon Fiber Carbon Building Manufacturer 199

Green Car Congress

MAY 14, 2013

DOE’s Fuel Cell Technologies (FCT) Office would like feedback on the “ 2013 Hydrogen Compression, Storage, and Dispensing Cost Reduction Workshop Final Report ”, with specific interest in which of the topics identified in the report are the most relevant to cost reduction at the hydrogen refueling station (forecourt).

Cost Of 199

Cost Of Hydrogen Carbon Fiber Low Cost 199

Green Car Congress

JANUARY 22, 2020

OXIS has also successfully developed a standard Li-S battery module that saves production time and cost. It is the key building block for customer batteries and can be utilized in electric buses, electric trucks, aircraft and marine vessels.

Lithium Sulfur 327

Lithium Sulfur Carbon Fiber Energy Mariner 327

Green Car Congress

DECEMBER 10, 2020

The team at the Advanced Technologies Center currently includes 5 engineers and designers. CSP’s Advanced Technology Department, in combination with R&D and Product Development, comprises more than 80 engineers, designers and scientists. Reduced tooling cost. Equipment includes: 4000-ton press with leveling and vacuum.

Batteries 221

Batteries Battery Carbon Fiber Michigan 221

Green Car Congress

NOVEMBER 13, 2020

However, the transition from ICEs to BEVs changes both the goals and the design considerations around lightweighting, Lux says. Platform design: BEVs are increasingly being designed around shared rolling frames or platforms that contain the batteries, drive systems, and in some cases structural elements of the cars.

Electric Vehicles 243

Electric Vehicles Batteries Battery Vehicles 243

Green Car Congress

AUGUST 13, 2012

These projects include the development and validation of modeling tools to deliver higher performing carbon fiber composites and advanced steels, as well as research into new lightweight, high-strength alloys for energy-efficient vehicle and truck engines. Fiber Thermoplastic Composites. Lead organization. Description.

Carbon Fiber 231

Carbon Fiber Carbon United States Fuel Economy 231

Green Car Congress

OCTOBER 25, 2014

Mercedes-Benz received two MATERIALICA Design and Technology Awards at the MATERIALICA 2014 trade fair for materials applications, surface technology and product engineering in Munich. The first was for the new steel pistons for diesel engines ( earlier post ), the second for high-strength carbon-fiber reinforced plastic (CFRP) struts.

Mercedes 262

Mercedes Carbon Fiber Diesel Cars 262