Green Car Congress

MAY 13, 2016

RMX Technologies and the Department of Energy’s Oak Ridge National Laboratory have signed an exclusive licensing agreement for a new technology that significantly reduces the time and energy needed in the production of carbon fiber. Oxidation is the most time-consuming phase of the multistep carbon fiber conversion process.

Carbon Fiber 150

Carbon Fiber Carbon Energy Production 150

Green Car Congress

MARCH 8, 2016

Continental Structural Plastics (CSP) has signed a memorandum of understanding with Mitsubishi Rayon (MRC), regarding the development and manufacturing of innovative carbon fiber structural components for the automotive industry in North America. Also key was reducing the cycle time associated with the use of carbon fiber.

Carbon Fiber 150

Carbon Fiber Carbon Mitsubishi North America 150

Green Car Congress

MARCH 9, 2011

Teijin Limited has achieved a significant reduction in the cycle time required for molding carbon fiber reinforced plastic (CFRP) automobile cabin frame, bringing it to less than one minute. Long-fiber thermoplastic pellet: high-strength pellet made from carbon fiber, suited for injection molding of complex parts.

Carbon Fiber 199

Carbon Fiber Carbon Automobile Concept 199

Revenge of the Electric Car

APRIL 12, 2010

2009 BMW Concept ActiveE. BMW MegaCity Urban Electric Car To Be Built of Carbon Fiber. First, the raw feedstock to make carbon fibers–just call it a “polacrylonitrile-based precursor&# –is made in Japan by a joint venture between SGL and Mitsubishi Rayon and flown to the U.S. April 7th, 2010.

Carbon Fiber 133

Carbon Fiber BMW Carbon Mitsubishi 133

Green Car Congress

APRIL 6, 2010

SGL Automotive Carbon Fibers LLC, the joint venture between SGL Group and BMW Group ( earlier post ), will build a carbon fiber manufacturing plant in Moses Lake, WA. In the next step, the facility in Moses Lake will convert the polyacrylic fibers into the actual carbon fibers.

Carbon Fiber 220

Carbon Fiber BMW Carbon Building 220

Green Car Congress

JUNE 4, 2014

Ford Lightweight Concept. Ford Motor Company unveiled its Lightweight Concept vehicle, which uses advanced materials to explore future weight-reduction solutions that could improve performance and fuel efficiency while reducing CO 2 emissions. 19” by 5” carbon fiber wheels. 19” by 5” carbon fiber wheels.

Carbon Fiber 225

Carbon Fiber Light Concept Ford 225

Green Car Congress

NOVEMBER 7, 2017

Automobili Lamborghini, a member of the Volkswagen Group, unveiled its new design concept for a future Lamborghini electric super sports car: the “Lamborghini of the Terzo Millennio”, developed in collaboration with two MIT laboratories. Now we are presenting an exciting and progressive concept car. Energy storage systems.

MIT 150

MIT Carbon Fiber Design Concept 150

Green Car Congress

JANUARY 24, 2020

This investment will support transformational research and development (R&D), innovative hydrogen concepts that will encourage market expansion and increase the scale of hydrogen production, storage, transport, and use. Concept papers are due 25 February 2020 and full applications are due 20 April 2020.

Market 207

Market Carbon Fiber Hydrogen Energy Storage 207

Green Car Congress

OCTOBER 30, 2009

SGL Group and BMW Group have formed a 51:49 joint venture to manufacture carbon fibers and fabrics for the automotive industry. The joint venture will be operated through two companies, one based in North America (SGL Automotive Carbon Fibers LLC), and the other in Germany (SGL Automotive Fibers GmbH & Co KG).

Carbon Fiber 186

Carbon Fiber BMW Carbon Mitsubishi 186

Green Car Congress

SEPTEMBER 21, 2018

On display at the event are its electric powertrain solutions, including a new hydrogen fuel cell concept powertrain developed by FPT for IVECO. The core of the new FPT Industrial electromobility offering is the E-Powertrain Concept with new E-Axle. Hydrogen fuel cell powertrain concept. The engine has a displacement of 2.3

Concept 236

Concept Industrial Industry Fuel 236

Green Car Congress

AUGUST 18, 2021

Two years after unveiling the BMW i Hydrogen NEXT concept car, BMW will present the BMW iX5 Hydrogen at the IAA Mobility 2021 in Munich in September. Additive manufacturing enables fast and highly flexible production of components—some of which have geometric shapes that cannot be realized with conventional production methods.

BMW 418

BMW Hydrogen Carbon Fiber Store 418

Green Car Congress

MAY 14, 2019

In collaboration with SGL Carbon, Chinese automotive manufacturer NIO has developed prototypes for battery enclosures made of carbon-fiber reinforced plastic (CFRP) for its NIO high performance electric vehicles. The battery enclosure is extremely lightweight, stable and safe.

Carbon Fiber 207

Carbon Fiber Carbon Batteries Battery 207

Green Car Congress

OCTOBER 29, 2014

the core company of the Teijin Group’s carbon fibers and composites business, has developed a new technology—Tenax Part via Preform (PvP)—for highly efficient production of thermoset carbon fiber-reinforced plastic (CFRP). Toho Tenax Co., Expensive intermediate steps are not necessary.

Carbon Fiber 218

Carbon Fiber Production Carbon Waste 218

Green Car Congress

APRIL 11, 2017

Qoros Automotive will reveal Qoros Model K-EV, its newest high-performance electric concept car, at Shanghai Auto 2017. Qoros Model K-EV is built with “Clever Carbon Cabin” (CCC) technology, a seamlessly-integrated cabin made primarily from carbon fiber. Qoros plans to put Model K-EV into mass production in 2019.

2017 150

2017 Carbon Fiber Concept Auto 150

Green Car Congress

DECEMBER 17, 2019

Potential topics under the FOA include: Electrolyzer Manufacturing R&D. This potential area would advance large-scale electrolyzer manufacturing in the US, focusing on manufacturing R&D to produce advanced components and systems for multi-megawatt-scale electrolyzers at high production volumes to lower hydrogen production costs.

Market 195

Market Carbon Fiber Hydrogen Mariner 195

Green Car Congress

APRIL 13, 2016

At the 2016 SAE World Congress, Toyota and Clemson University unveiled an innovative, flexible concept called uBox that is intended to appeal to the next generation of car buyers: Gen-Z. The roof pultrusion was something unexpected and very interesting when they first started talking about the concept.

Congress 150

Congress Toyota Concept Carbon Fiber 150

Green Car Congress

OCTOBER 22, 2020

The network is launching one of their many joint projects today—an eight-month project to develop and manufacture multi-material battery enclosures for electric vehicles. A component concept will be elaborated in detail. © AZL Aachen GmbH.

Czech Republic 221

Czech Republic Production Carbon Fiber Portugal 221

Green Car Congress

MARCH 15, 2023

As well as a monocoque made entirely of multi-technology carbon fiber, it features a front structure in Forged Composites; a special material made of short carbon fibers soaked in resin. The LB744 is also the first super sports car to be fitted with a 100% carbon fiber front structure.

Carbon Fiber 243

Carbon Fiber Carbon Concept Polymer 243

Green Car Congress

NOVEMBER 18, 2011

percent stake in SGL Carbon SE, reflecting its strengthening of focus on lightweight construction and the use of carbon fibre reinforced plastics (CFRP) in automobile manufacture. The BMW Group and the SGL Group already operate a joint venture, SGL Automotive Carbon Fibers (B Earlier post.).

BMW 255

BMW Carbon Fiber Carbon Automobile Manufacturer 255

Green Car Congress

JULY 1, 2022

In a seamless transition, further e-drive components will be manufactured there with immediate effect in addition to producing high-voltage battery modules, which is already being done since May 2021. The door panels of the BMW i3 are made of kenaf fibers.

BMW 435

BMW Production Wind Energy Storage 435

Green Car Congress

SEPTEMBER 8, 2014

A team led by Local Motors is 3D-printing a full vehicle body over 44 hours during the International Manufacturing Technology Show 2014 and will follow it up with a first drive set to take place the morning of Saturday, 13 September. SABIC’s LNP STAT-KON carbon fiber-reinforced compound. Earlier post.). Earlier post.).

Motor 303

Motor Motors Motoring Carbon Fiber 303

Baua Electric

JANUARY 19, 2024

Last week at CES in Las Vegas, Honda provided a first look at future EV models planned for 2026 with the Saloon and Space-Hub concepts. Honda Saloon Concept – 2024 CES Sized in the middle of Honda’s EV future. Honda declined to quote dimensions for the concepts, but they appeared to be in the vicinity of 190 inches long.

Honda 52

Honda Carbon Fiber Concept Las Vegas 52

Green Car Congress

MARCH 6, 2017

At the Geneva Motor Show, INFINITI is unveiling the Project Black S concept, exploring the potential for a new INFINITI performance grade, featuring on-road technology inspired by Formula One. A new ‘Black S’ grade, showcased by the new concept, could represent the maximum level of performance and dynamic capability offered by INFINITI.

Infinity 170

Infinity Carbon Fiber Hybrid Concept 170

Green Car Congress

JULY 12, 2013

Describing its product goals and tracking progress toward its 2020 manufacturing priorities in its 2012 Sustainability Report , General Motors reaffirmed its commitment to further reduce the energy used and the environmental impacts of building and operating an automobile. Manufacturing energy use and emissions. Earlier post.).

GM 275

GM MPG Manufacturer 2017 275

Green Car Congress

FEBRUARY 28, 2023

—Oliver Zipse, Chairman of the Board of Management of BMW AG The BMW iX5 Hydrogen developed on the basis of the current BMW X5 was first unveiled as a concept at the IAA show in 2019. Fuel cell systems are manufactured in two main steps, based on the individual fuel cells. Earlier post.)

BMW 259

BMW Hydrogen Fleet Lithium Ion 259

Green Car Congress

NOVEMBER 12, 2020

Conceived from the outset as purely electric mobility, the iX sees BMW redefining the successful Sports Activity Vehicle (SAV) concept. This is reflected in areas of the car such as its optimized aerodynamics, intelligent lightweight Carbon Fiber Reinforced Plastic design as well as extensive use of natural and recycled materials.

BMW 321

BMW Future Carbon Fiber Electric 321

Green Car Congress

JUNE 12, 2011

Audi is presenting the Audi e-tron Spyder concept plug-in diesel hybrid car ( earlier post ) against the backdrop of “Le Mans vers le futur,” an event held in Le Mans as a venue for manufacturers to showcase innovative drivetrain technologies. The concept car accelerates from zero to 100 km/h (62 mph in 4.4 Click to enlarge.

Audi 329

Audi Plug-in Hybrid Concept 329

Green Car Congress

APRIL 28, 2010

has signed a Joint Development Agreement (JDA) with Daimler AG to develop automobile parts made of carbon fiber reinforced plastics (CFRP). As the world’s largest manufacturer of carbon fiber, Toray has identified expansion of its Carbon Fiber Composite Materials Business in the automotive field as one of its top priorities.

Automobile 210

Automobile Carbon Fiber Parts Mercedes 210

Green Car Congress

MARCH 6, 2019

Teijin Limited’s automotive composites specialty groups have developed a multi-material composite automotive door concept that maintains required crash specifications while reducing overall weight by 35% when compared to a conventional steel door. The company has operations on three continents and more than 4,200 employees.

Light 191

Light Carbon Fiber Michigan 2019 191

Green Car Congress

OCTOBER 31, 2013

This includes, but is not limited to, novel tank designs and cost reduction concepts; carbon fiber reduction or elimination; Type III and Type IV tanks with alternative liner materials; conformable tank designs; alternative operating conditions (e.g., kWh per kilogram H 2 ) to meet a 300-mile driving range goal.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

OCTOBER 17, 2013

A composite blend of carbon fibers and polymer resin is being developed that can store and charge more energy faster than conventional batteries can. Volvo Cars is the only car manufacturer participating in the EU-funded project, which started in early 2010. Close up of the trunk lid carbon fiber composite.

Energy Storage 368

Energy Storage Volvo Carbon Fiber Energy 368

Green Car Congress

NOVEMBER 18, 2016

Selected projects will leverage national lab consortia launched under DOE’s Energy Materials Network (EMN) this past year, in support of DOE’s materials research and advanced manufacturing priorities. Proposed cathode catalyst concepts should demonstrate the potential to meet or exceed DOE’s 2020 activity target of 0.044 A/cm 2 at 0.9

Hydrogen 150

Hydrogen Fuel Carbon Fiber Water 150

Green Car Congress

APRIL 22, 2010

A Concept ActiveE is in the background. Ultra-light and high-strength composite CFRP (carbon fibre-reinforced plastic) will play a significant part in the materials mix, the company said. The fibres manufactured at Moses Lake will be used exclusively for the Megacity Vehicle. Click to enlarge. Earlier post.). Earlier post.)

Mini E 199

Mini E BMW China 2013 199

Green Car Congress

APRIL 23, 2020

For example, the S-in motion Battery Pack concept includes design options with a tray, without a tray, and different material strategies are considered. Today, BEV manufacturers are convinced that lightweighting remains a major topic for BIW design. Lightweighting emerges as a major factor in BEV design.

Carbon Fiber 365

Carbon Fiber Emissions Carbon Batteries 365

Green Car Congress

DECEMBER 12, 2011

DOE’s Pacific Northwest National Laboratory, in collaboration with Ford Motor Company, Lincoln Composites, Toray Carbon Fibers America, Inc. The project will focus on improving carbon fiber composite materials and the design and manufacture of hydrogen storage tanks. and AOC Inc., HRL Laboratories, LLC, up to $1.2

Hydrogen 330

Hydrogen Carbon Fiber Oregon Alabama 330

Green Car Congress

DECEMBER 12, 2014

A fiber-reinforced composite leaf spring based on the polyurethane matrix resin Loctite MAX 2 from Henkel is being used in the chassis of the new Volvo XC90, a premium crossover SUV of which the innovative rear axle concept is to serve as a platform for other model series.

Volvo 186

Volvo SUV Carbon Fiber Concept 186

Green Car Congress

AUGUST 3, 2016

The team reinforced aerospace-grade unidirectional carbon fiber laminate interfaces with high densities (>10 billion fibers per cm 2 ) of aligned carbon nanotubes (A-CNTs) that act as nano-scale “stitches”. Their results are published this week in the journal Composites Science and Technology.

Carbon Fiber 150

Carbon Fiber MIT Carbon Polymer 150