Remove Conversion Remove Engine Remove Resource Remove Waste
article thumbnail

DOE researchers investigate economic and environmental impacts of converting wet waste to renewable diesel

Green Car Congress

An open-access paper on their results is published in the journal ACS Sustainable Chemistry & Engineering. Meanwhile, wet waste feedstocks, such as animal manure and fats, oils, and greases (FOG), represent another important category of resources that could be utilized to produce MCCI bioblendstocks due to its abundant availability.

Waste 434
article thumbnail

LanzaTech, Northwestern, ORNL engineer microbe to convert industrial waste gases to acetone or isopropanol

Green Car Congress

A team of scientists from LanzaTech, Northwestern University and the Department of Energy’s Oak Ridge National Laboratory have engineered a microbe to convert molecules of industrial waste gases, such as carbon dioxide and carbon monoxide, into acetone and isopropanol (IPA). —Jennifer Holmgren, CEO of LanzaTech. Abdalla, T.

Waste 273
article thumbnail

GTI quantifies opportunity to produce low-carbon renewable natural gas (RNG) from wood wastes

Green Car Congress

GTI has released a site-specific engineering design titled “ Low-Carbon Renewable Natural Gas (RNG) from Wood Wastes ”. GTI led a team of engineers and scientists to produce a blueprint for converting an existing biomass facility into an RNG production site, using the wood waste feedstock and some of the existing infrastructure.

Waste 281
article thumbnail

China researchers hydrotreat waste engine oil and scrap tire oil blend to produce diesel- and jet-range fuel

Green Car Congress

Researchers at Henan Polytechnic University in China have hydrotreated the oil derived from hydrothermal liquefaction of scrap tires (STO) with waste engine oil (WEO) using five different activated carbon-supported noble metal catalysts—Pd/C, Pt/C, Ru/C, Ir/C, and Rh/C—for the production of liquid fuels. —Lou et al.

Oil 220
article thumbnail

UCR team demonstrates use of earth abundant elements in spin-mediated thermoelectric energy conversion for waste heat recovery

Green Car Congress

Mechanical engineers at the University of California, Riverside, have successfully used inexpensive materials to produce thermoelectric devices that transform low-level waste heat into electricity. The spin to charge conversion takes place in the NM (usually heavy metal) due to inverse spin-Hall effect. —Sandeep Kumar.

Waste 150
article thumbnail

MIT/Stanford team develops battery technology for the conversion of low-grade waste heat to power; TREC

Green Car Congress

Researchers at MIT and Stanford University have developed new battery technology for the conversion of low-temperature waste heat into electricity in cases where temperature differences are less than 100 degrees Celsius. These features lead to a high heat-to-electricity energy conversion efficiency of 5.7% —Gang Chen.

MIT 240
article thumbnail

Researchers developing free-piston linear generator for exhaust waste heat recovery

Green Car Congress

Researchers in China have developed a novel free-piston linear generator (FPLG) to recover exhaust waste heat efficiently from a vehicle engine. In a paper published in the journal Applied Thermal Engineering , the team from. the internal combustion engine is the power system of most vehicles. 2017.08.031.

Exhaust 186