Green Car Congress

NOVEMBER 25, 2020

The companies are joining efforts to implement the carbon-negative UBQ thermoplastic ( earlier post ) into auto parts manufactured by Motherson Group for the automotive industry. UBQ GHG Neutralizer additives enable processors to directly compensate cO 2 -equivalent emissions (GHG) generated by plastic polymers.

Parts 362

Parts Carbon Auto Polymer 362

Green Car Congress

FEBRUARY 15, 2020

A team of researchers from Canada and the US has developed a system that quickly and efficiently converts carbon dioxide into simple chemicals via CO 2 electrolysis. The electrode architecture enables production of two-carbon products such as ethylene and ethanol at current densities just over an ampere per square centimeter.

CO2 414

CO2 Production Polymer Water 414

Green Car Congress

MARCH 16, 2021

Neste announced in March 2020 an intention to increase its renewable products production capacity in Europe according to the company strategy. The key aspects contributing to the overall cost difference are logistics costs, site-specific construction costs and availability of low-carbon hydrogen supply.

Renewable 397

Renewable Finland Production Netherlands 397

Green Car Congress

OCTOBER 25, 2020

Linde GmbH and Shell announced an exclusive collaboration agreement on ethane-oxidative dehydrogenation (E-ODH) technology for ethylene production. Ethylene is widely used in the chemical industry; its worldwide production exceeds that of any other organic compound.

Carbon 355

Carbon Commercial Polymer Industrial 355

Green Car Congress

FEBRUARY 12, 2022

Researchers at Stanford University have shown that porous polymer encapsulation of metal-supported catalysts can drive the selectivity of CO 2 conversion to hydrocarbons. The research team encapsulated a supported Ru/TiO 2 catalyst within the polymer layers of an imine-based porous organic polymer that controls its selectivity.

Conversion 395

Conversion Polymer CO2 Engine 395

Green Car Congress

OCTOBER 25, 2020

PCC 6803 cells holding ethylene forming enzyme (Efe) from Pseudomonas syringae are entrapped within a natural polymer matrix, thus forming the thin-layer biocatalytic structure. The team optimized the production system by varying different parameters, such as radiance, inorganic carbon level, and periodicity of medium renewal.

Green 386

Green Production Polymer Conversion 386

Green Car Congress

APRIL 11, 2021

The new companies are focused on creating electrochemical systems that can help reduce carbon emissions in hard-to-decarbonize sectors and represent the program’s fourth cohort. GCxN provides promising cleantech startups with technical resources to accelerate product commercialization while de-risking investment.

Hydrogen 418

Hydrogen Green Polymer Power 418

Green Car Congress

FEBRUARY 26, 2014

Researchers at the Polymer Technology Group, part of the UPV/EHU’s Department of Polymer Science and Technology and the Institute for Polymer Materials, POLYMAT, in Spain, recently reported the synthesis of high-performance poly(etherimide) (PEI)-based nanocomposites (PNs) with multi-walled carbon nanotubes (MWCNT) via melt mixing.

Polymer 231

Polymer Spain Carbon Parts 231

Green Car Congress

MAY 4, 2023

Twelve has developed an efficient polymer-electrolyte membrane (PEM) CO 2 electrolyzer that uses proprietary CO 2 -reducing catalysts to split CO 2 with just water and renewable electricity as inputs, syngas (CO and hydrogen) as the output, and pure oxygen as the only byproduct. Earlier post.)

Fuel 199

Fuel Production Alaska Carbon 199

Green Car Congress

SEPTEMBER 2, 2020

Group14 Technologies, a provider of silicon-carbon composite materials for global lithium-ion markets, announced that it has been selected as a winner of the Department Of Energy’s Energy Storage Grand Challenge and will receive a $3.96-million million award.

Energy Storage 321

Energy Storage Carbon Lithium Ion Energy 321

Green Car Congress

NOVEMBER 20, 2021

However, to be commercially viable, the process needs to be improved to yield a higher amount of desirable carbon-rich products. Although we know copper is the best catalyst for this reaction, it doesn’t give high selectivity to the desired products. earlier post ). Credit: Berkeley Lab).

CO2 221

CO2 Production Carbon Environment 221

Green Car Congress

JULY 18, 2021

The financing round will enable the company to scale from the batch processing of materials to commercial roll-to-roll production. MIRUM is made with natural, biodegradable polymers. Synthetic polyurethane-based leathers require around 5 kg carbon dioxide equivalent per kg of synthetic polymer produced.

BMW 435

BMW Polymer Illinois Carbon 435

Green Car Congress

FEBRUARY 8, 2015

The approach, described in a paper in the journal Nature Communications , could be an important advance in carbon capture and sequestration (CCS). They have significant performance advantages over the carbon-absorbing materials used in current CCS technology. carbon dioxide uptake and release over repeated cycles.

Polymer 150

Polymer Carbon Universal Gas-Electric 150

Green Car Congress

MAY 20, 2023

The Bridgestone Turanza EV tire is the first replacement market tire in North America to feature ENLITEN technology ( earlier post ), which is engineered to help optimize all-season performance, provide longer wear life, and allow for the incorporation of renewable and recycled materials in its tire products.

Polymer 488

Polymer North America North Carolina Renewable 488

Green Car Congress

FEBRUARY 1, 2019

The parties are willing to discuss collaboration opportunities in low-carbon products and renewable energies development. Eni has been operating in Indonesia since 2001 and currently has a large portfolio of assets in exploration, production and development.

Renewable 230

Renewable Indonesia Carbon Production 230

Green Car Congress

JANUARY 27, 2023

The US Department of Energy (DOE) will award some $118 million in funding for 17 projects to accelerate the production of sustainable biofuels. Topic Area 1: Pre-Pilot Scale-Up of Integrated Biorefineries Algenesis Corporation, “Pre-Pilot Scale Production of Algae-based Jet Fuel and Polyurethane Monomers”, $4,987,974.

Production 225

Production Carbon Conversion Mariner 225

Green Car Congress

APRIL 29, 2021

Projects funded through this solicitation will develop technologies that reduce embodied energy and carbon emissions associated with the production and consumption of metals, polymers, fibers, and electronic waste, as well as identify training activities that will expand the American manufacturing workforce.

Manufacturer 186

Manufacturer Carbon Emissions Waste 186

Green Car Congress

AUGUST 10, 2020

Novvi LLC announced the successful start-up of its Deer Park, TX plant, where it is manufacturing and marketing 100% renewable base oils ( NovaSpec Base Oils ) for the lubricants industry, and 100% renewable process oils for polymer, adhesives, and personal care industries. Novvi is a joint venture of Amyris, Inc.,

Oil 247

Oil Renewable Production Chevron 247

Green Car Congress

SEPTEMBER 27, 2021

The Road Map involves a move to the production and use of hydrogen by all businesses at the Grangemouth site accompanied by carbon capture and storage of at least 1 million tonnes per annum of CO 2 by 2030. There will also be a shift in the polymer product portfolio to include higher levels of post-consumer recycled content.

Hydrogen 369

Hydrogen Polymer Ireland Carbon 369

Green Car Congress

APRIL 3, 2021

Alongside ceramic-based materials, the Fraunhofer Institute for Ceramic Technologies and Systems IKTS is researching the potential of other materials such as carbon as a solution. Carbon forms an ultrathin layer on porous, ceramic substrates where it acts as a membrane, separating natural gas and hydrogen from each other. © Fraunhofer.

Hydrogen 511

Hydrogen Gas Transportation Polymer 511

Green Car Congress

APRIL 13, 2020

Researchers at Toyohashi University of Technology in Japan have developed an active sulfur material and carbon nanofiber (S-CNF) composite material for all-solid-state Li-sulfur batteries using a low-cost and straightforward liquid phase process. Schematic images and electron microscope photograph of sulfur-carbon composites (top).

Carbon 243

Carbon Lithium Sulfur Li-ion Batteries 243

Green Car Congress

FEBRUARY 28, 2023

Evonik is investing in a production plant expansion for fumed aluminum oxide at its site in Yokkaichi, Japan. The facility will be the company’s first alumina plant in Asia, focusing on the production of specialty solutions for lithium-ion battery technologies, used for electric vehicles.

Japan 243

Japan Li-ion Lithium Ion Batteries 243

Green Car Congress

MAY 10, 2018

Researchers at the University of Illinois have developed a new polymer-curing process that could reduce the cost, time and energy needed, compared with the current manufacturing process. The resulting polymer and composite parts possess similar mechanical properties to those cured conventionally. —Robertson et al.

Polymer 186

Polymer Manufacturer Energy Illinois 186

Green Car Congress

MARCH 10, 2023

GW of Silyzer 300 polymer electrolyte membrane (PEM) electrolyzers that will use renewable energy to separate hydrogen from water, resulting in approximately 300,000 tonnes of hydrogen per year. We face a time of incredible expansion in hydrogen production amid global supply chain challenges.

Texas 397

Texas Global Supplies Energy 397

Green Car Congress

JANUARY 23, 2019

BDS produces and commercializes MOLECULAR REBAR, a proprietary technology of modified carbon nanotubes that offers potential for enhancing the performance of energy storage applications using lead-acid and lithium-ion batteries. BDS was founded in 2014 as a joint venture between SABIC Ventures US LLC and Molecular Rebar Design.

Energy Storage 268

Energy Storage Carbon Saudi Arabia Lead Acid 268

Green Car Congress

MAY 20, 2022

Korea-based LOTTE Chemical and US-based solid-state battery component startup Soelect recently signed a Memorandum of Understanding to review the creation of a joint venture and the construction of a US$200-million GWh-grade lithium metal anode production facility in the United States by 2025.

Production 218

Production Polymer Global Batteries 218

Green Car Congress

JULY 31, 2020

million from the US Department of Energy (DOE) to develop and validate technology that will reduce the cost of manufacturing high-performance carbon fiber by 25% to make composite natural gas or hydrogen fuel tanks to power cars and trucks. Well over half of the composite fuel tank’s cost is attributed to carbon fiber used in its manufacture.

Carbon Fiber 246

Carbon Fiber Carbon Hydrogen Gas 246

Green Car Congress

OCTOBER 27, 2021

Researchers at the Swiss Federal Institute of Technology (ETH) Zurich, Switzerland, have developed a carbon-supported platinum nanoparticle catalyst that can achieve complete hydrocracking of polypropylene into liquid hydrocarbons (C 5 –C 45 ). The platinum phase controls the activity, while the carbon carrier regulates selectivity.

Oil 389

Oil Motor Motors Motoring 389

Green Car Congress

JANUARY 31, 2022

Penn State researchers have proposed cold sintering as an improved method of solid-state battery production that enables multi-material integration for better batteries. One of the larger issues for solid-state batteries making the transition from laboratory to the market is the challenges inherent in their production.

Batteries 370

Batteries Battery Production Sodium 370

Green Car Congress

NOVEMBER 30, 2022

LanzaTech and Sumitomo Riko Company have entered into a joint-development agreement to reuse rubber, resin and urethane waste for the production of a key chemical intermediate, isoprene. Isoprene is produced by plants, and along with its polymers, is the main component of natural rubber. —Jennifer Holmgren, CEO, LanzaTech.

Waste 186

Waste Production Climate Change Polymer 186

Green Car Congress

JULY 6, 2023

Origin Materials, a carbon negative materials company ( earlier post ), has begun startup of Origin 1, the first commercial CMF plant, located in Sarnia, Ontario, in-line with prior guidance. The Origin platform converts C-6 cellulose into four isolated building-block chemicals in one chemo-catalytic step with almost zero carbon loss.

Commercial 195

Commercial Carbon Polymer Convert 195

Green Car Congress

JULY 24, 2017

limited practical energy density, life time and the scaling-up of materials and production processes. These arise from the fact that the intermediate products, polysulfides, formed during the electrochemical reaction, going from S to Li 2 S, are soluble in common electrolytes used, leading to a low cycle life. Navarra, M. 201700977.

Polymer 186

Polymer Li-ion Energy Batteries 186

Green Car Congress

SEPTEMBER 3, 2020

The US Department of Energy (DOE) announced the award of approximately $72 million in federal funding to support the development and advancement of carbon capture technologies under two funding opportunity announcements (FOAs). Enabling Production of Low Carbon Emissions Steel Through CO 2 Capture from Blast Furnace Gases.

Carbon 236

Carbon Coal Gas-Electric Gas 236

Green Car Congress

MAY 4, 2012

In cooperation with project partners from BASF, Munich Technical University, and the University of Hamburg, scientists at Siemens’ global research unit Corporate Technology developed an alternative for the standard polystyrene-based acrylonitrite-butadiene-styrene (ABS) polymer, which is frequently used for consumer products.

Polymer 252

Polymer Renewable CO2 Cleaner 252

Green Car Congress

MARCH 4, 2022

Carbon transformation company Twelve and biotechnology company LanzaTech have transformed CO 2 emissions into ethanol as a part of an ongoing research and development partnership. Our process aims to rebalance the overabundance of carbon in our environment and instead reuse it for meaningful applications.

Convert 324

Convert CO2 Carbon Polymer 324

Green Car Congress

NOVEMBER 11, 2014

Teijin Limited is developing a non-platinum carbon alloy catalyst (CAC) for the cathode oxygen reduction reaction (ORR) in polymer electrolyte fuel cells. CAC is made from polyacrylonitrile (PAN) and steel via carbonization. —Chai et al. 2010.01.012. 2010.01.012. Catalysts Fuel Cells'

Carbon 210

Carbon Fuel Polymer Production 210

Green Car Congress

OCTOBER 3, 2016

SGL Group has inaugurated the production line for carbon-fiber precursor at its FISIPE site in Lavradio, near Lisbon in Portugal. Precursor is a polymer-based fiber which is used as the main raw material for the production of carbon fibers.

Carbon Fiber 199

Carbon Fiber Portugal Carbon Polymer 199