Green Car Congress

APRIL 12, 2012

Ford Motor Company is partnering with Dow Automotive Systems, a business unit of The Dow Chemical Company, to research the use of advanced carbon fiber composites in high-volume vehicles. Carbon fiber composites have been used in aerospace and racing cars for decades due to their unique combination of high strength and low mass.

Carbon Fiber 247

Carbon Fiber Carbon Ford Vehicles 247

Green Car Congress

JULY 24, 2013

Plasan Carbon Composites (PCC), a supplier of carbon fiber solutions to the automotive industry and a subsidiary of composites solutions pioneer Plasan Sasa, Inc, has partnered with Toray Industries to bring additional material and technology capabilities and solutions to its automotive and commercial customers.

Carbon Fiber 170

Carbon Fiber Carbon Market Shelby 170

Green Car Congress

JANUARY 22, 2018

In a paper in the journal Small , the team reports that the metal/metal oxide@N-doped graphitic carbon fibers—especially Co 3 O 4 —exhibit comparable ORR catalytic activity but superior stability and methanol tolerance versus the industry-standard platinum in alkaline solutions. Tang et al. Click to enlarge.

Carbon Fiber 244

Carbon Fiber Fuel Polymer Carbon 244

Green Car Congress

AUGUST 18, 2020

The project is to develop a cost-effective and efficient smart structural coating deposition system and advanced high-end technology tools to inspect and rehabilitate gas distribution pipelines. The designed polymer composite coating materials provide structural strength and facile processability with smart functionalities.

Parts 186

Parts San Diego Carbon Fiber Polymer 186

Green Car Congress

SEPTEMBER 16, 2020

They are made of fiber-composite materials and, in keeping with Audi’s lightweight construction philosophy, each weighs just 26 kilograms (57.3 The ultra high-strength outer shell comprises two layers: an inner layer of carbon fiber-reinforced polymer (CFRP) and an outer layer of glass fiber-reinforced polymer (GFRP).

Audi 504

Audi Gas Gas-Electric Gasoline-Electric 504

Green Car Congress

MAY 14, 2013

DOE’s Fuel Cell Technologies (FCT) Office would like feedback on the “ 2013 Hydrogen Compression, Storage, and Dispensing Cost Reduction Workshop Final Report ”, with specific interest in which of the topics identified in the report are the most relevant to cost reduction at the hydrogen refueling station (forecourt).

Cost Of 199

Cost Of Hydrogen Carbon Fiber Low Cost 199

Green Car Congress

JANUARY 18, 2014

As described in multiple DOE reports, the main barriers to widespread PEV commercialization are the cost; performance and life; and abuse tolerance of high?energy Specifically: the current cost of high?energy board charger must be offset by the cost savings in operational costs as seen by the customer. energy batteries.

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

SEPTEMBER 28, 2012

This 24-month program has the overall objective significantly to improve the mechanical properties of the carbon fiber/epoxy material used to construct hydrogen fuel tanks with CNT reinforcement. Applied Nanotech has developed CNT reinforced polymers for fiber composites for a wide range of applications.

Hydrogen 387

Hydrogen Carbon Fiber Fuel Polymer 387

Green Car Congress

APRIL 22, 2018

The study focuses on four promising areas: Carbon fibers and products incorporating carbon fibers. Only a small fraction of downstream bitumen derivate is used for Polymer production. This study provides insights into high-value products that can be made by, or in partnership with Alberta’s oil sands industry.

Oil-Sands 199

Oil-Sands BBC Carbon Fiber Oil 199

Green Car Congress

DECEMBER 1, 2016

As part of a development project, researchers at Daimler AG and the Austrian CRP (carbon fiber reinforced plastics) applications specialist Secar Technologie GmbH have developed an innovative new CRP composite pultrusion process enabling carbon fibers and metal to be pultruded in profile form in larger volumes.

Carbon Fiber 150

Carbon Fiber Production Polymer Carbon 150

Green Car Congress

AUGUST 21, 2014

A Commercially Scalable Process for Silicon Anode Prelithiation his project will develop a cost- effective and scalable pre- lithiation process. Demonstration scale plasma oxidation of carbon fiber This project will scale up a carbon fiber oxidation technology that reduces energy consumption and oxidation time.

Engine 231

Engine Carbon Fiber Fuel Batteries 231

Green Car Congress

JUNE 9, 2017

million for 30 new projects aimed at discovery and development of novel, low-cost materials necessary for hydrogen production and storage and for fuel cells onboard light-duty vehicles. Precursor Development for Low-Cost, High-Strength Carbon Fiber. Precursor Development for Low-Cost, High-Strength Carbon Fiber.

Hydrogen 170

Hydrogen Carbon Fiber Fuel Low Cost 170

Green Car Congress

OCTOBER 17, 2013

A composite blend of carbon fibers and polymer resin is being developed that can store and charge more energy faster than conventional batteries can. The material combines carbon fibers and a polymer resin, creating a very advanced nanomaterial, and structural supercapacitors. Click to enlarge.

Energy Storage 368

Energy Storage Volvo Carbon Fiber Energy 368

Green Car Congress

JULY 12, 2017

million to 22 new cost-shared projects to accelerate the research of advanced battery, lightweight materials, engine emission control technologies, and energy efficient mobility systems (EEMS). ICME Low Cost Carbon Fiber (Area of Interest 2). The US Department of Energy (DOE) is awarding $19.4 Lead organization.

Carbon Fiber 150

Carbon Fiber Li-ion Mercedes GM 150

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

JUNE 8, 2016

The purpose of the RFI is to identify future strategic research and development pathways for the DOE to pursue with potential to meet future system cost targets. Currently, carbon fiber (CF) reinforced polymer (CFRP) composites are used to make COPVs. Click to enlarge.

Hydrogen 150

Hydrogen Polymer Vehicles Carbon Fiber 150

Green Car Congress

JANUARY 9, 2015

The new Institute for Advanced Composites Manufacturing Innovation (IACMI), announced today by President Obama, will focus on advanced fiber-reinforced polymer composites that combine strong fibers with tough plastics to yield materials that are lighter and stronger than steel. Adherent Technologies, Inc.; TPI Composites, Inc.;

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Cars That Think

NOVEMBER 1, 2023

And where a traditional wildlife tracker costs €3,500 to €4,000, the Kinefox costs about €270 in materials, according to researchers at Max Planck. “If something can transmit new types of data, or it can last longer than anything else, it has an application and it has value.” Kinefox is open source, with files published on GitHub.

Energy 136

Energy Solar Carbon Fiber Universal 136

Green Car Congress

JUNE 7, 2013

FCTO anticipates that the FOA may include the following Topic Areas: Topic Area 1: Reducing the Cost of Compressed Hydrogen Storage Systems. Topic 1 will focus on the development of complete, low-cost, compressed hydrogen storage systems. Lowering the current high strength fiber (i.e., kWh when manufactured in high volume; and.

Hydrogen 199

Hydrogen Carbon Fiber Power Powered 199

Green Car Congress

AUGUST 7, 2020

REPAIR teams will develop technology that enables gas utilities to update their distribution systems at low cost and continue to reliably service commercial and residential gas delivery needs nationwide. REPAIR teams are developing technologies to address deficiencies while also working toward a 10-to-20-times reduction in cost per mile.

Gas 297

Gas Gas-Electric Universal Colorado 297

Green Car Congress

MARCH 23, 2012

DE-FOA-0000648 ) This funding will support the development of high-strength, lightweight carbon fiber composites and advanced steels and alloys that will help vehicle manufacturers improve the fuel economy of cars and trucks while maintaining and improving safety and performance.

Carbon Fiber 218

Carbon Fiber Vehicles Carbon Engine 218

Green Car Congress

MAY 19, 2014

Potential high-value products from isolated lignin include low-cost carbon fiber, engineering plastics and thermoplastic elastomers, polymeric foams and membranes, and a variety of fuels and chemicals—all currently sourced from petroleum. Each product stream, however, has its own distinct challenges. Ragauskas et al.

Production 225

Production Carbon Fiber Polymer Fuel 225

Green Car Congress

OCTOBER 4, 2009

Toyota’s targeted cost reductions in fuel cell vehicles. Design of the fuel cell system and hydrogen storage system plays a critical role in achieving the cost reduction, Yokoyama said. Toyota is also seeking to reduce the cost of fuel-cell system specific materials, through cooperation with materials manufacturers.

2015 315

2015 Toyota Commercial Fuel 315

Green Car Congress

AUGUST 31, 2016

Sepion’s polymer membrane technology provides a counterpoint, yielding long-lasting lithium-sulfur cells. Advancing to 10 Ah battery prototypes, Sepion faces challenges in membrane manufacturing related to polymer processing and the molecular basis for membrane performance and durability. Harper International Corp.

Manufacturer 150

Manufacturer EPRI Lithium Sulfur Carbon Fiber 150

Green Car Congress

DECEMBER 1, 2016

Carbon specialist SGL Group is a development partner in the European joint development project INSPIRE (Integration of Novel Stack Components for Performance, Improved DuRability and LowEr Cost), which has been funded with a €7-million (US$7.4-million) Earlier post.). CNRS Montpellier, VTT Technical Research Centre of Finland Ltd.,

Fuel 150

Fuel Carbon Fiber South Carolina Hydrogen 150

Green Car Congress

MARCH 23, 2016

Researchers at Oak Ridge National Laboratory (ORNL) have developed a new class of high-performance thermoplastic elastomers for cars and other consumer products by replacing the styrene in ABS (acrylonitrile, butadiene and styrene) with lignin, a brittle, rigid polymer that, with cellulose, forms the woody cell walls of plants.

Renewable 150

Renewable Polymer Carbon Fiber Commercial 150

Green Car Congress

SEPTEMBER 27, 2018

An Advanced Meso-Scale Peridynamic Modeling Technology Using High Performance Computing for Cost-Effective Product Design and Testing of Carbon Fiber-Reinforced Polymer Composites in Light-Weight Vehicles – Ford Motor Company (Dearborn, MI) will improve the prediction of crash response of carbon composites in auto parts.

Hydrogen 207

Hydrogen Vehicles Maintenance Carbon Fiber 207

Green Car Congress

AUGUST 18, 2017

The drive unit’s high efficiency means low costs of ownership: Fuel costs compared with an equivalent gasoline engine are much lower, at around €4 (US $4.70) per 100 kilometers (62.1 In gasoline mode, these figures are 5.6 liters per 100 kilometers (42.0 mpg US) and 126 grams of CO 2 per kilometer (202.8 kilogram (1.3 mi) available.

Audi 150

Audi Gas Available Standards 150

Green Car Congress

AUGUST 10, 2011

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

OCTOBER 24, 2016

As part of the EMN, the HydroGEN consortium will provide industry and academia the expertise and capabilities to more quickly develop, characterize, and deploy high-performance, low-cost advanced water-splitting materials for lower cost hydrogen production.

Water 150

Water Hydrogen Production Green 150

Green Car Congress

FEBRUARY 25, 2016

The Lightweight Materials Consortium (LightMat) , led by Pacific Northwest National Laboratory, will enable increased vehicle fuel efficiency by designing specialized alloys and carbon fiber reinforced polymer composites that can be manufactured on a large scale.

Energy 150

Energy Carbon Fiber Clean Cleaning 150

Green Car Congress

MARCH 24, 2016

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a production method they estimate will reduce the cost of carbon fiber as much as 50% and the energy used in its production by more than 60%. Details of the cost analysis will be shared with the prospective licensees.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

SEPTEMBER 16, 2010

The awards range from $500,000 to $3 million and will provide small innovative companies with the staying power they need to develop the processes that are necessary to reduce the manufacturing costs for their products and enable manufacturing at scale. Strategic Polymer Sciences, Inc. manufacturing base for permanent magnets.

Fuel 210

Fuel Energy Carbon Fiber Polymer 210

Green Car Congress

MAY 20, 2016

Researchers led by a team from Oak Ridge National Laboratory (ORNL) have developed a new laser process that could make joining carbon fiber composites and aluminum for lightweight cars and other multi-material high-end products less expensive—as well as making the joints more robust. Adrian Sabau.

Carbon Fiber 170

Carbon Fiber Carbon Long Beach Polymer 170

Green Car Congress

APRIL 6, 2017

For the next generation of the Audi A8, an intelligent mix of four materials—aluminum, steel, magnesium and carbon fiber-reinforced polymer (CFRP)—is being used for the first time in the weight-bearing body structure—more materials than in any of the brand’s previous production models.

Audi 186

Audi Light Carbon Fiber Polymer 186

Green Car Congress

MAY 29, 2010

By manufacturing structural material that can serve multiple functions, fewer parts are needed for any given application, which means reduced cost, lighter weight and greater efficiency. NAHF-XTM inventor Khalid Lafdi, Group Leader for Carbon Materials at UDRI. Everybody is growing carbon nanotubes on substrates. Khalid Lafdi.

Carbon Fiber 170

Carbon Fiber Energy Production Ohio 170

Green Car Congress

MAY 22, 2014

Applications in this topic area need to identify novel outreach approaches to expand the domestic supply chain with the ultimate goal of reducing the cost, increasing the reliability, and standardizing the parts and components that go into these systems. Supply chain. Global competitiveness.

Hydrogen 285

Hydrogen Supplies Manufacturer Fuel 285