Green Car Congress

APRIL 13, 2023

The US Environmental Protection Agency (EPA) announced two new proposed federal emissions standards spanning light-, medium- and heavy-duty vehicles for model year 2027 and beyond. The light-duty vehicle category includes passenger cars and light trucks consistent with previous EPA criteria pollutant and GHG rules.

EPA 210

EPA Light Standards Emissions 210

Green Car Congress

APRIL 5, 2017

Southwest Research Institute (SwRI) has designed and manufactured two advanced single-cylinder engines for combustion research and development. SwRI engineers have designed a highly versatile single-cylinder research engine platform for advanced combustion research. Image courtesy SwRI. Click to enlarge.

Light 186

Light Available Engine Low Cost 186

Green Car Congress

FEBRUARY 1, 2019

In brief, it uses light to transform gooey liquids into complex solid objects in only a matter of minutes. We demonstrated concurrent printing of all points within a three-dimensional object by illuminating a rotating volume of photosensitive material with a dynamically evolving light pattern. We print features as small as 0.3

Light 379

Light Polymer Building Parts 379

Green Car Congress

JULY 2, 2021

The Karma Innovation and Customization Center (KICC) revealed the first Club Car Current vehicles being produced under a contract manufacturing agreement with AYRO. These light-duty EVs fill the gap between full-sized trucks and small utility carts for low-speed logistics and cargo services in campus and urban environments.

Karma 418

Karma Cars Manufacturer California 418

Green Car Congress

OCTOBER 16, 2020

Monash University engineers have demonstrated improvements in the fatigue life of high-strength aluminum alloys by 25 times—a significant outcome for the transport manufacturing industry. Aluminum alloys are the second-most popular engineering alloy in use today. a form of self-healing). One cannot.

Engine 243

Engine Transportation Manufacturer Universal 243

Green Car Congress

JUNE 25, 2019

In 2012, less than one percent of all cars and light-duty trucks were produced with a non-hybrid stop/start system. After 2015, the greatest share of start/stop systems was installed on light-duty trucks, rising to 35.7% of all light-duty trucks produced in model year (MY) 2018. Notes: Data for 2018 are preliminary. Source: U.S.

Light 207

Light Installation Hybrid 2018 207

Green Car Congress

MAY 10, 2023

The other projects include efforts to bring a microreactor design closer to deployment, tackle nuclear regulatory hurdles, improve operations of existing reactors, and facilitate new advanced reactor developments. The US Department of Energy (DOE) awarded $22.1 This funding opportunity is administered by DOE’s Office of Nuclear Energy (NE).

Hydrogen 475

Hydrogen Molten Salt Clean Cleaning 475

Green Car Congress

NOVEMBER 8, 2016

A team led by researchers from Oak Ridge National Laboratory (ORNL) is developing a lower-cost cast aluminum (Al) alloy capable of at least a 50 ˚C temperature increase over the current cylinder head alloys 319 and 356 for use in light duty engines. For companies] to develop new ones or to improve materials, that’s becoming rare.

Light 259

Light Engine Exhaust San Diego 259

Baua Electric

NOVEMBER 13, 2023

there were several manufacturers in India involved in producing Electric Vehicle (EV) motor controllers. Here’s a detailed overview of some notable EV motor controller manufacturers in India: 1. Setco Automotive Ltd: Overview: Setco Automotive is a well-known automotive components manufacturer in India.

India 94

India Manufacturer Motor Motors 94

Green Car Congress

APRIL 10, 2021

The Antenna-Reactor is the combination of a larger light-harvesting plasmonic nanoparticle (the ‘Antenna’), and smaller traditional catalyst nanoparticles (the ‘Reactor’). Although the catalyst is important, the proprietary reactor design is what makes it work. of global greenhouse gas (GHG) emissions.

Hydrogen 221

Hydrogen Manufacturer Production Universal 221

Green Car Congress

AUGUST 25, 2021

Tritium, a global developer and manufacturer of DC fast chargers for EVs, and Miller Technology , a supplier of mobile mining equipment for safety and productivity, are partnering to provide fast chargers and light-duty battery EVs for the mining industry. —Paul Summers, Miller Technology’s Lead Battery Electric Vehicle Engineer.

Light 186

Light Industrial Industry Australia 186

Green Car Congress

JANUARY 13, 2021

have signed a Memorandum Of Understanding (MOU) to launch a 50-50 joint-venture based in France by the end of the first half of 2021, targeting more than 30% share of the fuel cell-powered light commercial vehicle (LCV) market in Europe. Groupe Renault and Plug Power Inc.

Plug-in 170

Plug-in Hydrogen Light Commercial 170

Green Car Congress

MAY 3, 2021

Williams Advanced Engineering (WAE) and Italdesign are parterning to provide the upper premium automotive sector with a complete high-performance EV production solution. These two design philosophies reduce reliance on the upper structure, which then gives greater design freedom for a variety of “top hats”.

Engine 221

Engine Design Batteries Battery 221

Green Car Congress

DECEMBER 12, 2013

This year’s event showcased developments in advanced manufacturing processes, user-friendly automotive technologies and advanced vehicle designs at the ATC. As a result, the new magnesium alloy has the potential to be used in engine parts, which must withstand higher temperatures. Earlier post.).

GM 218

GM 2013 Design China 218

Green Car Congress

OCTOBER 6, 2020

MAHLE Powertrain’s (MPT’s) latest development of its passive MAHLE Jet Ignition (MJI) technology ( earlier post ) can now be added into existing engine designs with only minimal changes to the final machining process. A whole system engineering approach is the way to get the best from MJI. —Adrian Cooper.

Engine 221

Engine Production Low Cost Gas 221

Green Car Congress

APRIL 26, 2019

The motor-inverter combination is designed for Class 2 through Class 6 vehicles. Designed primarily for today’s direct-drive architectures, the TM4 SUMO LD will also provide a modular solution for future transitions to widespread e-Axle platforms. Dana Incorporated launched its newest direct-drive electric powertrain, the TM4 SUMO LD.

Light 246

Light Commercial Vehicles Mariner 246

Green Car Congress

MARCH 12, 2020

Rolls-Royce and ASI Mining have agreed to ensure compatibility of MTU engines and ASI’s Mobius command and control software for autonomous vehicles. The customers would thus save on operating costs and further benefit from the increased performance of the autonomously optimized MTU engines. Autonomous Solutions, Inc. Occlusion mapping.

Engine 321

Engine Environment Utah Diesel 321

Green Car Congress

SEPTEMBER 22, 2022

Toyota Motor Manufacturing, Texas (Toyota Texas, TMMTX) has started production for the all-new, all-hybrid 2023 Toyota Sequoia. The i-FORCE MAX powertrain features a unique motor generator within the bell housing between the twin-turbo engine and the 10-speed automatic transmission. Earlier post.)

San Antonio 435

San Antonio Hybrid Tundra Production 435

Green Car Congress

FEBRUARY 12, 2019

Carbon announced a strategic partnership with Lamborghini in digital manufacturing. Carbon Digital Light Synthesis (DLS) technology uses light and oxygen to produce products rapidly from a pool of resin. CLIP, as reported in Science , uses digital light projection in combination with oxygen permeable optics.

Parts 191

Parts Carbon Manufacturer Auto 191

Green Car Congress

NOVEMBER 7, 2020

The high-speed 3D visualization will help engine manufacturers and suppliers improve the design models that are used to create fuel injectors. The requirement for higher fuel efficiency and lower emissions has emphasized the need for tight design and manufacturing processes with higher injection pressures and smaller orifices.

Design 186

Design Fuel Light Gas 186

Green Car Congress

MAY 6, 2020

The US Department of Energy (DOE) announced up to $3 million in funding to spur the use of US National Laboratory supercomputing resources to strengthen domestic manufacturing. Selected projects will be awarded up to $300,000 to support computing cycles and work performed by DOE National Laboratories, universities, and non-profit partners.

Manufacturer 186

Manufacturer Waste Conversion Universal 186

Green Car Congress

MAY 14, 2020

OXIS Energy and the Minas Gerais Development Company CODEMGE have signed a 15-year lease agreement with Mercedes Benz Brazil (MBB) to take possession of a plant located at the MBB manufacturing site in Juiz de Fora in southeast Brazil to build a Li-sulfur battery manufacturing operation. Earlier post.).

Brazil 186

Brazil Manufacturer Lithium Sulfur Building 186

Baua Electric

APRIL 9, 2023

Aatrael Electric Machine Engineering LLP Aatrael Electric Machine Engineering is a professional custom-made electric motor design and developer. Our team can design and develop special electrical motors as per the customer needs. ARROW TECHNOLOGIES DESIGNER, DEVELOPER OF MOTION CONTROL SYSTEMS.

India 75

India Manufacturer Motor Motors 75

Green Car Congress

JULY 19, 2022

Supernal partnered with the Group’s design studios to create the cabin concept as the company works to certify its eVTOL vehicle for commercial use in the United States starting in 2028 and in the EU and UK shortly after. The seat frame also utilizes excess raw material from the airframe manufacturing process. —Jaiwon Shin.

Hyundai 221

Hyundai Concept International Motor 221

Cars That Think

APRIL 30, 2022

The same is true—with much higher stakes—for microelectronic chips: How can engineers confirm that what’s inside has truly met the intent of the designers? How can a semiconductor design company tell whether its intellectual property was stolen? This CPU was manufactured using 22-nanometer CMOS FinFET technology).

Design 121

Design Light Switzerland Manufacturer 121

Green Car Congress

NOVEMBER 24, 2013

USC Viterbi School of Engineering researchers have developed a faster 3-D printing process and are now using it to model and fabricate heterogeneous objects, which comprise multiple materials. The USC Viterbi team also developed a two-way movement design for bottom-up projection so the resin could be quickly spread into uniform thin layers.

Manufacturer 199

Manufacturer Engine San Diego 2013 199

Green Car Congress

JULY 23, 2022

Conceived to lead Cadillac’s electric future and inspired by the brand’s 120-year heritage, it serves as a touchstone for the Cadillac design and engineering teams, who continue to develop CELESTIQ as it moves closer to production. Availability for the production version of CELESTIQ will be announced at a later date.

Cadillac 448

Cadillac Cars General Motors Design 448

Green Car Congress

JUNE 19, 2012

demands of very high-power diesel engines. liter diesel (N57D30S1) engine applied in the M550d xDrive, with a specific power output of 93 kW/liter (124 bhp/liter). downsized diesel engines with improved fuel economy and CO 2 emissions. —Arnd Baberg, Chief Engineer Piston Product Engineering, Federal-Mogul.

Diesel 271

Diesel Light Engine Downsizing 271

Green Car Congress

JULY 6, 2022

The new electric motor is clean, light, and efficient and can be assembled without the use of rare earths by customer request. —Martin Berger, Vice President Corporate Research and Advanced Engineering at MAHLE. Despite its very compact and light design, its continuous output is more than 90% of its peak output.

Motor 447

Motor Motors Motoring Concept 447

Green Car Congress

AUGUST 18, 2020

The US Department of Energy’s (DOE’s) Reducing EMbodied-Energy and Decreasing Emissions (REMADE) Manufacturing Institute announced approximately $35 million to support research and development (R&D) that will enable US manufacturers to increase the recovery, recycling, reuse, and remanufacturing of plastics, metals, electronic waste, and fibers.

Manufacturer 207

Manufacturer Iowa Waste Plugin 207

Green Car Congress

NOVEMBER 13, 2019

Selected projects will receive access to the National Laboratories’ high-performance computing (HPC) facilities and expertise to help address key challenges in US manufacturing, material, and mobility development. HPC4EI is the umbrella program for DOE’s HPC for Manufacturing, HPC for Materials, and HPC for Mobility initiatives.

Manufacturer 170

Manufacturer Chicago San Jose Polymer 170

Green Car Congress

MAY 13, 2022

The exterior design will feature new lighting technology and a wraparound front windscreen inspired by a glider plane glass canopy, enhancing frontal vision. Our engineering group is working on new features and high-tech solutions for the PEAR that will change how we use and enjoy a vehicle in the city.

Fisker 259

Fisker Ohio Price Production 259

Green Car Congress

JUNE 21, 2019

At the 2019 IAA Frankfurt in September, Tenneco’sPowertrain division will present its award-winning PRiME 3D simulation software which has been shown to cut development time for engine cylinder components by up to 70%. PRiME 3D enables the optimization of piston and piston ring performance with an accuracy level close to 95%.

Engine 207

Engine Gas Emissions Fuel Economy 207

Green Car Congress

AUGUST 8, 2020

OCTOPUS will take this leading-edge motor, power electronics and packaging transmission design, adding next generation materials, manufacturing processes, simulation and test cycles to deliver a full e-axle powertrain with unique levels of integration and revolutionary performance characteristics suitable for real world application by 2026.

Bentley 448

Bentley Motor Motors Motoring 448

Green Car Congress

JUNE 14, 2018

The Rüsselsheim Engineering Center will take on the global responsibility for the development of the next-generation of high-efficiency gasoline engines for all Groupe PSA brands (Peugeot, Citroën, DS Automobiles, Opel and Vauxhall). Rüsselsheim already had global responsibility for engine development when we were still part of GM.

Engine 186

Engine Gasoline Hybrid Gasoline-Electric 186

Electric Vehicles India

AUGUST 9, 2021

CESL opens tenders for 100,000 light electric vehicles. This comes as part of the CESL aim to have half a million light electric vehicles across India. Let us know more about CESL opens tenders for light electric vehicles. . CESL opens tenders. CESL partners Hindustan Petroleum Corporation Limited (HPCL).

Light 104

Light Electric Vehicles Vehicles India 104

Green Car Congress

MAY 12, 2022

Lordstown Motors, an OEM of electric light-duty trucks focused on the commercial fleet market, has closed the sale of its Lordstown facility and signed a contract manufacturing agreement and joint venture agreement for product development with affiliates of Hon Hai Technology Group (Foxconn). and Irvine, Calif.

Motor 334

Motor Motors Motoring Sale 334