Remove Design Remove Downsizing Remove Engine Remove EPA
article thumbnail

EPA official: the future of the internal combustion engine is bright and clear

Green Car Congress

Even while projecting to the future and talking about batteries and electric vehicles, he said, “ when you look at our actual analysis and you look to our projections for the future, 95% or more of the vehicles, all of the heavy-duty vehicles in our analysis are relying on IC engines. should not discount novel engine designs.

article thumbnail

Ford / AVL study concludes mid-level ethanol blend attractive as a long-term future fuel for use in optimized engines in US

Green Car Congress

A study by a team from Ford Motor Company and AVL has concluded that a mid-level ethanol blend—greater than E20 but less than E40—appears to be attractive as a long-term future fuel for the US for use in engines optimized for the higher octane blend. In the face of increased regulatory stringency (e.g., Earlier post.)

Engine 253
article thumbnail

MECA report finds additional NOx emission reductions from new heavy-duty trucks achievable and cost-effective

Green Car Congress

CO 2 and NO x certification test data for heavy-duty diesel engines certified from 2002 through 2019. Source of data: US EPA (2019). New substrates are designed with thinner walls or higher porosity, which allows the coating of better catalysts without sacrificing durability. Chart: MECA.

Emissions 291
article thumbnail

New powertrain line-up for Hyundai 2022 Tucson

Green Car Congress

Hyundai’s 2022 Tucson, with its all-new design, will begin arriving in the US market this spring (gasoline and hybrid models), with plug-in models available in summer 2021. liter, direct-injected and multi-port-injected gasoline engine as well as 1.6-liter, liter engine provides quick and crisp shifts. The new Smartstream 2.5-liter

Tucson 221
article thumbnail

MECA report assesses technology feasibility for heavy-duty diesel trucks to meet lower NOx standards by 2024

Green Car Congress

The report presents dynamometer test results and emission models from fully aged aftertreatment systems installed on heavy-duty on-road engines to offer several compliance paths that are achievable by model year 2024 without significant changes to today’s engines or aftertreatment systems. Source of data: US EPA (2019).

Standards 191
article thumbnail

EPAs GHG Standards for Light-Duty Vehicles; Special Credits To Encourage PHEVs, BEVs and FCVs

Green Car Congress

Source: EPA. As part of its program, EPA is establishing a system of averaging, banking, and trading (ABT) of credits, based on a manufacturer’s fleet average CO 2 performance. Both EPA and NHTSA programs are footprint-based—i.e., g CO 2 /mi (EPA). mpg US (EPA). g CO 2 /mi (EPA). mpg US (EPA).

EPA 236
article thumbnail

Ford study suggests GDI engines can meet coming California and US PM emissions standards over 150k miles; more work to be done

Green Car Congress

As reported in a paper in ACS journal Environmental Science & Technology , the results showed that GDI technology has the potential to meet the upcoming California LEV III and US EPA Tier 3 PM mass standard of 3 mg/mi (phasing in over MY2017?2021) Schematic diagram of test vehicle engine & exhaust system and PM sampling systems.

Standards 246