Green Car Congress

AUGUST 21, 2015

A team led by Dr. Stuart Licht at The George Washington University in Washington, DC has developed a low-cost, high-yield and scalable process for the electrolytic conversion of atmospheric CO 2 dissolved in molten carbonates into carbon nanofibers (CNFs.)

Low Cost 150

Low Cost Carbon Li-ion Carbon Fiber 150

Green Car Congress

OCTOBER 31, 2013

The office encourages collaborative approaches with teaming across multiple entities including university, industry, and/or national labs with complimentary disciplines and expertise necessary for a holistic approach. 350 to 700 bar) storage vessels are constructed using expensive high-strength carbon fiber.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

MAY 29, 2010

Nicknamed “fuzzy fiber” by its inventor at UDRI, Nano Adaptive Hybrid Fabric (NAHF-XTM) is the first tailored nanomaterial capable of being produced in sizes and quantities large enough to make them affordable and viable for large-scale commercial use. This is going to disrupt the way we think about materials. Brian Rice.

Carbon Fiber 170

Carbon Fiber Energy Production Ohio 170

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Green Car Congress

FEBRUARY 8, 2011

The University of Tennessee Institute of Agriculture has opened a comprehensive research facility to accommodate faculty and industry initiatives through the new Center for Renewable Carbon (CRC). Additional CRC research capabilities include life cycle analysis and a biomass fractionation reactor.

Tennessee 210

Tennessee Renewable Carbon Carbon Fiber 210

Green Car Congress

AUGUST 10, 2011

This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber. Plasan Carbon Composites. The Pennsylvania State University. . $6,000,000. Amprius, Inc. .

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

DECEMBER 30, 2022

A team from the University of Calgary and Rice University has used flash joule heating (FJH) ( earlier post ) to convert low-value asphaltenes—a by-product of crude oil refining—into a high-value carbon allotrope, asphaltene-derived flash graphene (AFG). Flash graphene from asphaltenes. (A) —Saadi et al.

Waste 492

Waste Manufacturer Carbon Fiber Polymer 492

Green Car Congress

JUNE 12, 2012

The top two awards, one of $9 million to a project led by Dow Chemical, and one of $8.999 million to a project led by PolyPlus, will fund projects tackling, respectively, the manufacturing of low-cost carbon fibers and the manufacturing of electrodes for ultra-high-energy-density lithium-sulfur, lithium-seawater and lithium-air batteries.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

JANUARY 4, 2012

A team from the Loker Hydrocarbon Research Institute and Department of Chemistry, University of Southern California, reports on an improved material for capturing carbon dioxide from the air—silica?organic Adsorption of CO 2 from the air at 25 °C on FS-PEI-50 and FS-PEI-33 under dry and humid conditions. Click to enlarge.

CO2 199

CO2 Hybrid Carbon Climate Change 199

Green Car Congress

FEBRUARY 15, 2022

The selected projects—spanning 22 states and coordinated at universities, national laboratories, and private companies—will advance technologies for a wide range of areas, including electric vehicles, offshore wind, storage and nuclear recycling. Cornell University. Stanford University. The Ohio State University.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

NOVEMBER 17, 2014

Related to this, DOE seeks by 2020 to develop novel precursors and conversion processes capable of reducing the high-volume cost of high-strength carbon fiber by 25% from $13 per pound to ~$9 per pound. In FY 2014, one area of focus was low-cost, high-strength carbon fiber precursors and advanced tank designs.

Hydrogen 225

Hydrogen Carbon Fiber 2014 St. Louis 225

Green Car Congress

SEPTEMBER 19, 2017

Macroalgae can be utilized as a feedstock for domestic transportation fuels, chemicals and other commercial products without competing with food crops for land and water. Today, nearly all domestic biomass produced for electricity generation and liquid fuels occurs on land. —ARPA-E Acting Director Eric Rohlfing.

Mariner 150

Mariner Production Energy Alaska 150

Green Car Congress

JANUARY 4, 2020

These projects aim to develop tools, methods, and technologies to enhance cost-effectively the safety and efficiency of the US’ natural gas production, gathering, storage, and transmission infrastructure. AOI 2: Process-Intensified Technologies for the Upcycling of Flare Gas into Transportable, Value-Added Products.

Gas 186

Gas Gas-Electric West Virginia Carbon Fiber 186

Green Car Congress

SEPTEMBER 21, 2017

Topic Area 2: High-value products from waste and/or other undervalued streams in an integrated biorefinery. Currently, the syrup content is used for biogas production and as the solid fuel for boilers. Currently, the syrup content is used for biogas production and as the solid fuel for boilers.

South Dakota 150

South Dakota South Carolina Carbon Fiber Texas 150

Green Car Congress

NOVEMBER 18, 2014

Two tanks with a three-layer structure made of carbon fiber-reinforced plastic and other materials are used to store hydrogen at 70 MPa (approximately 700 bars or 10,000 psi). Middle layer: carbon fiber reinforced plastic (structural element). After DC/AC conversion by power supply unit. And a long view. …

Prius 296

Prius Toyota Hydrogen Carbon Fiber 296

Green Car Congress

AUGUST 14, 2014

Integrated Computational Materials Engineering (ICME) Development of Carbon Fiber Composites for Lightweight Vehicles (Area of Interest 2). This project will develop, integrate and implement predictive models for Carbon-Fiber Reinforced Polymer composites that link the material design, molding process and final performance.

Plug-in 299

Plug-in Li-ion Plug Vehicles 299

Green Car Congress

NOVEMBER 17, 2015

Audi is the first manufacturer worldwide to use this technology in a production plug-in hybrid. Covered in greater detail in an earlier post , the battery-electric e-tron quattro concept provides a very close foreshadowing of the production model to follow in 2018. Thermal management systems in the Q7 e-tron quattro. Click to enlarge.

Audi 150

Audi PHEV Diesel Fuel 150

Green Car Congress

JULY 17, 2015

Frank is Professor Emeritus, Mechanical and Aeronautical Engineering at the University of California, Davis, where he established the Institute for Transportation Studies (ITS-Davis), and was director of the US Department of Energy’s National Center of Hybrid Excellence at UC Davis. Table of Contents. Engineering Advantages of PHEV.

PHEV 150

PHEV Plug-in Renewable Energy 150