2008 2010 Polymer Renewable 
Green Car Congress
MARCH 29, 2012
As part of the alliance, DaniMer will utilize Myriant’s bio-succinic acid for the production of high-performance, bio-based polymers used to make a broad range of products. Myriant utilizes its technology platform to develop renewable chemicals utilizing low-cost sugars.
Green Car Congress
JUNE 21, 2010
The European Commission Fuel Cells and Hydrogen (FCH) Joint Undertaking (JU) has published its 2010 Call for Proposals with a budget of €89.1 The JU publishes annual calls for proposals (from 2008-2013), on the basis of which funding is granted for research, technological development and demonstration projects. Earlier post.).
Green Car Congress
JUNE 24, 2010
In addition to Explorer, the Fusion, Fiesta, F-250/F-350 Super Duty, Mercury Milan and Lincoln MKZ will get soy foam by the end of 2010. Soy foam has helped Ford reduce its annual petroleum oil usage by more than 3 million pounds, and is up to 24% more renewable than petroleum-based foam. Earlier post.) Earlier post.)
Green Car Congress
JULY 4, 2010
Researchers at North Carolina State University are developing an ozone-based pre-treatment technique (ozonolysis) to release sugars from the energy grass miscanthus for production into renewable fuels or chemicals with minimal generation of chemical waste streams and degradation of the carbohydrate components. García-Cubero et al.
Green Car Congress
SEPTEMBER 14, 2009
Lignin is a complex chemical compound (a cross-linked amorphous phenolic polymer) and is the biomass component with highest energy content (9,000 - 11,000 Btu/lb compared to 7,300 - 7,500 for cellulose, Johnson 2002). The company plans to break ground on that facility during the first half of 2010. Jim Flatt, President of Mascoma.
Green Car Congress
AUGUST 7, 2009
With the initiation of the EFRCs in April 2008, the Department of Energy (DOE) budgeted approximately $100 million for multiple EFRC awards starting in FY 2009. awards are subject to FY 2010 to FY 2013 appropriations. Polymer-Based Materials for Harvesting Solar Energy. $16. National Renewable Energy Laboratory.
Green Car Congress
NOVEMBER 16, 2009
GM’s plastic post-isolation for automotive HVAC blower motors, featured in the 2010 Camaro, uses an integrally molded plastic mount instead of multiple rubber isolators to soften and quiet HVAC fan-motor vibrations, resulting in significant reductions in cost and development time plus a quieter vehicle interior for consumers.
Expert insights. Personalized for you.
170 
Let's personalize your content