Green Car Congress

MARCH 24, 2013

The ability to repair and repurpose tools and dies can save energy and costs, and reduce lead time by extending tool life through use of the additive manufacturing techniques developed by this team. Fused Depositing Modeling (FDM) for Complex Composites Tooling”, Northrop Grumman Aerospace Systems.

Manufacturer 225

Manufacturer Missouri Universal Polymer 225

Green Car Congress

SEPTEMBER 18, 2015

The new investments will go toward a wide range of research, development, and demonstration projects that aim to reduce the price and improve the efficiency of plug-in electric, alternative fuel, and conventional vehicles. The Curators of The University of Missouri. Delphi Automotive Systems. PPG Industries.

Fuel 150

Fuel Carbon Fiber Lithium Ion Vehicles 150

Green Car Congress

NOVEMBER 12, 2009

LMPO material supports a voltage range of 4.25V - 2V. In essence, HPL’s cathode material combines the benefits of a phosphate (low cost; over- and under-charge resilience; structural stability; good cycle life; thermal stability) with the higher voltage benefits of an oxide material. Capacity at 1C is 900 mAh.

Li-ion 199

Li-ion America Lithium Ion Polymer 199

Green Car Congress

MARCH 10, 2015

The Midwest DRIVES Initiative: Demonstrating Reliable Innovative Energy Solutions Project will reduce barriers to Alternative Fuel Vehicle (AFV) deployment in a 4 state area by offering a wide range of medium-term (30-90 day average) AFV demonstrations to fleets.

Alternative Fuels 150

Alternative Fuels Fuel Market Vehicles 150

Green Car Congress

APRIL 30, 2010

The critical barrier to wider deployment of electric vehicles is the high cost and low energy of today’s batteries. This ARPA-E program seeks to develop a new generation of ultra-high energy density, low-cost battery technologies for long range plug-in hybrid and all-electric vehicles. Applied Materials Inc.

Carbon 249

Carbon Batteries Battery Li-ion 249

Green Car Congress

SEPTEMBER 10, 2010

The 27 projects range from concept studies and component design research to prototype development and in-water device testing. Lee, New Hampshire) will design and optimize a rugged submersible generator capable of coupling to a broad range of tidal and river current turbines, for use in a wide range of operational conditions.

Mariner 210

Mariner Energy Alaska New Jersey 210

Green Car Congress

MARCH 23, 2019

Missouri University of Science and Technology. Missouri S&T will combine a novel additive manufacturing technique, called ceramic on-demand extrusion, and ceramic fusion welding techniques to manufacture very high temperature heat exchangers for power cycles with intense heat sources. The Ohio State University.

Low Cost 207

Low Cost Universal Power Powered 207