Green Car Congress

OCTOBER 20, 2022

The US Department of Energy (DOE) is awarding a combined $2.8 billion to 21 projects to expand domestic manufacturing of batteries for electric vehicles (EVs) and the electrical grid and for materials and components currently imported from other countries. Earlier post.) Of that, $1.6

Parts 459

Parts Batteries Battery Lithium Ion 459

Green Car Congress

JULY 17, 2020

Funded through the US Department of Energy’s (DOE’s) Office of Energy Efficiency and Renewable Energy (EERE), projects will conduct research in advanced batteries, electrification, and manufacturing in support of DOE’s Energy Storage Grand Challenge. Utility Managed Smart Charging for Consumer and Grid Benefits.

Lithium Ion 236

Lithium Ion Vehicles Li-ion Universal 236

Green Car Congress

OCTOBER 10, 2011

The California Energy Commission has awarded $1,585,490 to spur research on projects including a solid-state Li-ion battery system for grid-scale energy storage. Funds for the 13 projects come from the Public Interest Energy Research (PIER) program. This will make electric charging safer and easier.

Li-ion 186

Li-ion Grid Energy California 186

Green Car Congress

MARCH 27, 2013

A chart from EnerG2’s 2012 DOE Merit Review presentation shows different pore profiles for different energy storage applications. These properties can be tailored and modified for adaptation to the specific requirements of a given energy storage application. Click to enlarge. Aaron Feaver.

Li-ion 281

Li-ion Carbon Standards Energy Storage 281

Green Car Congress

APRIL 1, 2011

The cell operates without a catalyst and has high storage efficiency. The possibility of a flow-through mode for the cathode allows flexibility of the cell design for safe, large-capacity electrical-energy storage at an acceptable cost, they conclude. The high energy storage has stimulated a worldwide study of Li-air batteries.

Sodium 218

Sodium Water Li-ion Texas 218

Green Car Congress

JUNE 4, 2013

Schematic illustration of 3D porous SiNP/conductive polymer hydrogel composite electrodes. Each SiNP is encapsulated in a conductive polymer surface. A team at Stanford University has developed stable silicon Li-ion battery anodes by incorporating a conducting polymer hydrogel into the Si-based material. Click to enlarge.

Li-ion 236

Li-ion Manufacturer Polymer Deep Cycle 236

Green Car Congress

AUGUST 1, 2014

Running at lower temperatures can make a big difference for sodium-beta batteries and may enable batteries to store more renewable energy and strengthen the power grid. Batteries with the new alloy electrode also retain more of their original energy storage capacity. —Xiaochuan Lu, lead author. Lemmon, Vincent L.

Sodium 218

Sodium Batteries Battery Energy Storage 218

Green Car Congress

APRIL 18, 2018

This topic seeks platinum group metal-free oxygen reduction electrocatalyst and electrode R&D enabling cost-competitive polymer electrolyte membrane fuel cells, as part of DOE’s Energy Materials Network. 2b) Electrolyzer Manufacturing R&D: R&D to enable manufacturing techniques to reduce electrolyzer capital costs.

Hydrogen 231

Hydrogen Fuel Polymer Concept 231

Cars That Think

JULY 15, 2021

Thirty-two years later, our laptops are powered by much, much lighter lithium-ion or lithium-polymer batteries. Within each of those cells is a chemical paste that stores the charges. We are also now starting to see utility-scale energy-storage trials where chemistry has been replaced by gravity.

Batteries 86

Batteries Battery Lithium Ion Store 86

Setec Powerr

NOVEMBER 29, 2022

With the worldwide emphasis on renewable energy sources such as solar and wind, energy storage has become an essential solution for grid stability and reliability. Not only that, but energy storage is also an important research direction in the field of electric vehicles. Classification of energy storage.

Energy Storage 98

Energy Storage Energy Lead Acid Sodium 98

Green Car Congress

MARCH 8, 2013

The battery, which can be low cost and reliable in terms of safety, provides another chemistry for post Li-ion batteries, they suggest, and with higher practical energy densities than Li-air systems for supporting applications including electric vehicles and large-scale grid energy storage. —Wang et al.

Li-ion 281

Li-ion Low Cost Recharge Ni-Li 281

Green Car Congress

MARCH 22, 2012

Polymer electrolyte membrane fuel cells (PEMFCs) are being developed worldwide as clean energy conversion devices. Long-Lived, High-Energy-Density and Low-Cost Lithium-Ion Batteries for Automotive, Grid Energy and Medical. Batteries for grid energy storage and medical devices have similar requirements.

Canada 262

Canada Li-ion Fuel Batteries 262

Plug In India

SEPTEMBER 7, 2022

During charging, Na ions move from a sodium- and iron-containing cathode through a liquid electrolyte and across a polymer barrier to a hard carbon anode. The energy density is approaching that of LFP Batteries. If they can improve their gravimetric energy density, they can be a serious player.

Sodium 59

Sodium Li-ion Batteries Battery 59

Green Car Congress

FEBRUARY 2, 2013

Carbon Fiber Polymer Composite. Currently, polymer-film wound capacitors are commonly used in inverters for electric traction drive systems, but they cannot tolerate sufficiently high temperatures for future applications that will require operation in ambient temperatures up to 140°C. Magnesium (AZ or AM series commercial alloy).

Li-ion 240

Li-ion Fuel Vehicles Lithium Ion 240

Green Car Congress

JUNE 19, 2013

a) Galvanostatic charge/discharge voltage profiles at a rate of C/10. (b) Grid scale storage requires a low cost, safe, and environmentally benign battery system. The key metrics for Na-ion batteries are low cost and material abundance, as opposed to high-energy density for Li-ion batteries. Credit: ACS, Zhu et al.

Maryland 199

Maryland Grid Li-ion Batteries 199

Green Car Congress

SEPTEMBER 14, 2016

By creating high performance parts built with solid ion conductors—solids in which ions can be mobile and store energy—the IONICS program will focus on new ways to process and integrate these parts into devices with the goal of accelerating their commercial deployment. 3,500,000. $3,500,000. Ionic Materials. 2,250,000.

Li-ion 150

Li-ion Polymer Batteries Battery 150

Green Car Congress

FEBRUARY 15, 2022

Field-Focused Load-Leveled Dynamic Wireless Charging System for Electric Vehicles - $1,425,000. Cornell University seeks to develop a breakthrough wireless charging system for stationary and dynamic charging of electric vehicles (EVs), with significant improvements compared with state-of-the-art solutions. Stanford University.

Clean 284

Clean Cleaning Energy Li-ion 284

Green Car Congress

FEBRUARY 19, 2009

In Li-ion batteries, Li ions (Li + ) leave the cathode during charging and move through the electrolyte and separator to intercalate into the anode. As the technology gets fixed, the anode is more of an issue related to fast charge. Generic Li-ion cell and various component technologies. The reverse happens on discharge.

Li-ion 170

Li-ion Power Powered Market 170

Green Car Congress

FEBRUARY 27, 2016

Components built with solid ion conductors, especially separators, have the potential to serve as enabling platforms, as demonstrated by the wide application of Yttria-Stabilized Zirconia (YSZ) ceramics and perfluorosulfonic acid (PFSA) polymers (e.g., charging a battery). hydrated PFSA in the case of fuel cells and electrolyzers).

Li-ion 150

Li-ion Batteries Battery Fuel 150

Green Car Congress

JANUARY 21, 2016

US Energy Secretary Ernest Moniz used the Washington DC Auto show as the venue to announce $58 million in funding for vehicle technology advancements. Area of Interest (AOI) 2: Grid Modernization for Electric Vehicles. This AOI will help promote the use of PEVs to reduce dependence on petroleum and reduce greenhouse gas emissions.

Li-ion 150

Li-ion Ni-Li Vehicles Grid 150

Green Car Congress

AUGUST 30, 2009

kWh lithium-polymer battery pack. Overall, BMW Vision EfficientDynamics comes with a total of 98 lithium-polymer cells, each offering a capacity of 30 Ah and developing continuous output of 600 Amps at a voltage of 3.7 Overall weight of the entire energy storage system is 85 kg or 187 lb. The BMW Vision EfficientDynamics.

All-Electric 268

All-Electric Plug-in Concept Plug 268

Green Car Congress

JUNE 7, 2011

as a function of charge/discharge cycles at different charge/discharge current densities of. low-cost Na-ion battery system for upcoming power and energy. storage systems, the team concludes in a paper published in the journal Advanced Materials. To connect intermittent renewable energy sources (i.e., C), 24 (0.2

Sodium 218

Sodium Recharge Li-ion Batteries 218

Green Car Congress

NOVEMBER 21, 2013

As Equus owners have enjoyed since its introduction in 2010, should a Tucson Fuel Cell require any service, a Hyundai dealer will pick up the vehicle and provide a loaner, then return their car after service to their home or business, at no charge. Two hydrogen storage tanks, with a total capacity of 5.64

Tucson 324

Tucson Honda Hyundai Concept 324