article thumbnail

NREL develops novel method to produce renewable acrylonitrile; carbon fibers from renewable biomass

Green Car Congress

Today, acrylonitrile is used in the production of acrylic fibers for carpets, clothes, and fabrics, and in plastics such as food containers, and packaging materials. The high acrylonitrile yield allows us to propose a potential industrial process for the conversion of lignocellulosic biomass to renewable acrylonitrile and carbon fibers.

article thumbnail

DOE to award up to $6.7M to projects to convert captured CO2 to useful products, including fuels

Green Car Congress

However, they may be considered in order to establish a baseline for making comparisons with results from coal-derived flue gas. carbon fibers or plastics) while significantly reducing the energy demand/over potential required for the conversion process. Mineralization concepts utilizing CO 2 with industrial wastes.

Convert 150
article thumbnail

DOE to award up to $184M for advanced vehicle research and development in 8 areas of interest

Green Car Congress

This subtopic seeks research and development projects on novel lubricant formulations expected to improve the efficiency of advanced combustion regime engines by at least 10% (improvement based on comparison to similarly configured 2002 or later commercially available combustion engine). Development of Low-Cost Carbon Fiber.

Li-ion 231
article thumbnail

$26.4B DOE FY 2010 Budget Request Cuts Funding for Hydrogen Fuel Cell Vehicles; With Recovery Act Funding Boosts Support for PHEVs, Biomass and Biorefineries

Green Car Congress

FY 2010 budget requests for those four (comparisons are against FY 2009 appropriations) and additional appropriations are as follows: Energy Efficiency and Renewable Energy: $2.319 billion (+6.4%); $16.8 Electricity Delivery & Energy Reliability:$208 million (+51.8%); $4.5

2010 150
article thumbnail

Toyota FCV Mirai launches in LA; initial TFCS specs; $57,500 or $499 lease; leaning on Prius analogy

Green Car Congress

Two tanks with a three-layer structure made of carbon fiber-reinforced plastic and other materials are used to store hydrogen at 70 MPa (approximately 700 bars or 10,000 psi). Middle layer: carbon fiber reinforced plastic (structural element). After DC/AC conversion by power supply unit. The Prius analogy.

Prius 296
article thumbnail

Using the PHEV (Plug-In Hybrid Electric Vehicle) to Transition Society Seamlessly and Profitably From Fossil Fuel to 100% Renewable Energy

Green Car Congress

Appendix B: Car of the Future: A Comparison of Alternative Vehicles. It is alarming to see comparisons of the Chevrolet Volt PHEV with battery electric cars when the comparison focuses only on the electric range and ignores the other important differences. More information on e-mile comparisons is given by Reference Nº 2.

PHEV 150