Carbon Fiber Low Cost Resource Waste 
Green Car Congress
JANUARY 18, 2014
year plans and roadmaps, with a concomitant focus of the majority of its resources on a limited number of “highest probability of success” pathways/approaches to ensure that the program initiatives are supported at a critical mass (both in terms of dollars and time) for maximum impact. competitive waste heat recovery technologies.
Green Car Congress
DECEMBER 30, 2022
To date, efforts have been invested in developing carbon fibers, carbon electrodes, porous carbon foam/scaffolds, and carbon nanosheets from asphaltenes. Consequently, research on the valorization of asphaltenes has sparked over the past few years. —Saadi et al. —Saadi et al.
Green Car Congress
MAY 19, 2014
Potential high-value products from isolated lignin include low-cost carbon fiber, engineering plastics and thermoplastic elastomers, polymeric foams and membranes, and a variety of fuels and chemicals—all currently sourced from petroleum. Ragauskas, et al., Science doi: 10.1126/science.1246843.
Green Car Congress
JULY 10, 2010
Specifically, low cost and energy-efficient processes are sought that can be demonstrated and validated under field conditions to meet needs of the nascent algal biomass industry. Algae cultures tend to be relatively dilute, and the energy requirement to remove water from the cultures can be a significant portion of the energy balance.
Green Car Congress
DECEMBER 20, 2015
Accelerated Development and Deployment of Low-Cost Automotive Magnesium (Mg) Sheet Components. Dissimilar metal joint systems are limited to aluminum, steel, magnesium, and carbon fiber composites. Advances for the Production of Low Cost Electric Drive Vehicle Motors. per pound of weight saved.
Green Car Congress
APRIL 10, 2012
Some specific improvements which are of interest, but are not limited to, include: new low-cost materials, improvements in manufacturing processes, speed or yield, improved cell/pack design minimizing inactive material, significant improvement in specific energy (Wh/kg) or energy density (Wh/L), and improved safety. Advanced Materials.
Green Car Congress
JULY 17, 2015
It offers the solution to several significant transitions we need: moving society from burning fossil fuels to substituting renewable resource fuels such as solar, wind and biofuels; and from using fossil materials as fuel to using them for other recyclable uses. To ignore this potential is wasteful and foolish.
Expert insights. Personalized for you.
252 
Let's personalize your content