Remove Carbon Fiber Remove International Remove Low Cost Remove Waste
article thumbnail

US DOE awards more than $175M to 40 projects for advanced vehicle research and development

Green Car Congress

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber.

article thumbnail

DOE to award up to $184M for advanced vehicle research and development in 8 areas of interest

Green Car Congress

The objective of this AOI is to accelerate the realization of lighter weight vehicle materials made from magnesium and carbon fiber capable of attaining 50% weight reduction of passenger vehicles. Subtopics include: Low-Cost Development of Magnesium. Development of Low-Cost Carbon Fiber.

Li-ion 231
article thumbnail

Local Motors 3D printing a Strati at NAIAS; announces two micro-factories to open

Green Car Congress

Local Motors is 3D printing and assembling a Strati—the first 3D-printed car—live from the show floor at the North American International Auto Show (NAIAS). Made from a carbon fiber reinforced thermoplastic material by SABIC, the current model of the Strati takes approximately 44 hours to print 212 layers.

Motor 150
article thumbnail

DOE to issue FY14 Vehicle Technologies program-wide funding opportunity announcement

Green Car Congress

Possible areas of interest for the EV Everywhere Grand Challenge include, but are not limited to: Development of low-cost, high-strength automotive aluminum sheet. Integrated computational materials engineering (ICME) development of carbon fiber composites for lightweight vehicles.

Vehicles 246
article thumbnail

DOE to Award Up to $27M in Phase III Small Business Awards; Algae Processing, Fuel Cells, Improved Materials for Motors, Synthetic Fuels Among Areas of Interest

Green Car Congress

Specifically, low cost and energy-efficient processes are sought that can be demonstrated and validated under field conditions to meet needs of the nascent algal biomass industry. High-temperature, high-strength, lower-cost permanent magnets (PMs) are needed for traction motors for HEVs and PHEVs. Solar Technologies.

Fuel 210
article thumbnail

ARPA-E awards $175M to 68 novel clean energy OPEN 2021 projects

Green Car Congress

The selected projects will focus on technologies such as revolutionizing fuel cells for light- and heavy-duty vehicles, and technologies to generate less nuclear waste and reduce the cost of fuel. These dendrites can cause battery failure and pose a safety hazard due to internal short-circuit. Stanford University.

Clean 284
article thumbnail

DOE selects eight integrated biorefinery projects for up to $15M total in funding

Green Car Congress

Topic Area 2: High-value products from waste and/or other undervalued streams in an integrated biorefinery. Under Topic Area 1 (DOE selection): Thermochemical Recovery International Inc. TRI’s work in these systems will promote feedstock flexibility and enable the processing of low-cost feedstock to enhance IBRs’ economic viability.