Green Car Congress

MAY 30, 2021

Researchers in the European AMAPOLA (A Marketable Polymer based Al-S battery) project are analyzing the combination of sulfur and aluminum in a battery; both elements are abundant in the earth’s crust.

Polymer 321

Polymer Batteries Battery Li-ion 321

Green Car Congress

JUNE 23, 2016

Researchers at the University of Maryland have developed a novel, flexible, solid-state, ion-conducting membrane based on a 3D ion-conducting ceramic nanofiber network. The all-solid ion-conducting membrane can be applied to flexible Li-ion batteries and other electrochemical energy storage systems, such as lithium–sulfur batteries.

Li-ion 199

Li-ion Lithium Sulfur Batteries Battery 199

Green Car Congress

OCTOBER 20, 2022

The US Department of Energy (DOE) is awarding a combined $2.8 billion to 21 projects to expand domestic manufacturing of batteries for electric vehicles (EVs) and the electrical grid and for materials and components currently imported from other countries. Li 2 O spodumene concentrate. Earlier post.) Of that, $1.6

Parts 459

Parts Batteries Battery Lithium Ion 459

Green Car Congress

MAY 1, 2018

Researchers at the Ningbo Institute of Materials Technology & Engineering in China have developed new hybrid electrolytes to support high-voltage Li-ion batteries (e.g., ~5 O 4 /Li batteries are improved by using the hybrid electrolytes. O 4 /Li batteries are improved by using the hybrid electrolytes.

Li-ion 199

Li-ion Hybrid Batteries Battery 199

Green Car Congress

APRIL 20, 2018

China will account for more than 60% of the world’s production of wet-process separators for Li-ion batteries, with more than 10 billion square meters capacity, according to China-based market intelligence firm CCM. Separators are a key element in rechargeable lithium-ion batteries with liquid electrolytes.

Li-ion 186

Li-ion Energy Energy Storage Production 186

Green Car Congress

NOVEMBER 17, 2021

Titan Advanced Energy Solutions, a pioneer in ultrasound-based battery management solutions, announced a $33-million Series B financing led by HG Ventures, the corporate investment arm of The Heritage Group. Our ultrasound-based technology spans the battery life cycle. This works very well for determining the SoC of a battery.

Li-ion 218

Li-ion Energy Lithium Ion Batteries 218

Green Car Congress

NOVEMBER 26, 2012

Li-ion cathode materials that deliver high power and capacity and that also do not contain heavy metals are highly desired from a viewpoint of sustainability, the team notes in their paper. discharge properties as a cathode material in a Li-ion battery. discharge cycling of PPYT in LiNTf 2 /G4 at 45 °C, 1 C rate).

Li-ion 287

Li-ion Charging Batteries Battery 287

Green Car Congress

JANUARY 12, 2018

a leading provider of sensing, modeling/simulation, and control products, has introduced CellMod , the first Li-Ion battery simulation tool that can predict cell and pack behavior with a percentage of error of less than 5% under a wide range of test conditions. Sendyne Corp., All unique CellMod versions are created under NDA.

Li-ion 186

Li-ion Batteries Battery Lithium Ion 186

Green Car Congress

APRIL 24, 2021

announced plans to setup an 8 GWh Lithium Battery plant in the EEC of Thailand. The battery plant will establish Nong Yai as an EV hub of Thailand and ASEAN region. The battery plant will establish Nong Yai as an EV hub of Thailand and ASEAN region. The technology of the project will be led by Dr. Li Qiyong & Dr. Xu.

Thailand 186

Thailand Li-ion Lithium Ion Batteries 186

Green Car Congress

AUGUST 26, 2019

Researchers at MIT, with a colleague from Tsinghua University, have developed a safety envelope for Li-ion batteries in electric vehicles by using a high accuracy finite element model of a pouch cell to produce more than 2,500 simulations and subsequently analyzing the data with Machine Learning (ML) algorithms. —Li et al.

Lithium Ion 332

Lithium Ion MIT Li-ion Batteries 332

Green Car Congress

JULY 24, 2017

Researchers in Sweden and Italy have devised a simple strategy to address the issues currently hampering commercialization of high-energy density Li-sulfure batteries, including. limited practical energy density, life time and the scaling-up of materials and production processes. —Agostini et al.

Polymer 186

Polymer Li-ion Energy Batteries 186

Green Car Congress

FEBRUARY 23, 2018

France-based advanced battery-maker Saft, a wholly-owned subsidiary of international energy giant Total, is building an alliance with other European partners to launch an ambitious program of research, development and industrialization for new generations of batteries focusing on advanced high-density Li-ion and solid-state battery technology.

Li-ion 170

Li-ion Building Batteries Battery 170

Green Car Congress

APRIL 30, 2022

In 2021, Next Generation Manufacturing Canada (NGen) launched a call for proposals to support R&D projects for zero-emission vehicle (ZEV) manufacturing, systems, components, and batteries in Canada. The selected projects are: Advanced Manufacturing Process Innovations – Flex-Ion Battery Innovation Center. Lead: Ventra Group Co.;

Canada 304

Canada Li-ion Emissions Vehicles 304

Green Car Congress

JANUARY 21, 2013

John Goodenough at the University of Texas at Austin and colleague Kyu-Sung Park have written a perspective paper on Li-ion batteries (LIBs), published in the Journal of the American Chemical Society. Opportunities exist for the chemist to bring together oxide and polymer or graphene chemistry in imaginative morphologies. ”.a

Li-ion 262

Li-ion PHEV Transportation Batteries 262

Green Car Congress

JULY 30, 2012

Electrovaya introduced the PowerPad 600, a 600 Wh Li-ion SuperPolymer battery unit targeted at replacing existing lead acid and low energy density Lithium-Ion batteries used in hospitals, construction sites, warehouses, telecommunications, retail, standby power and wherever mobile power is required.

Li-ion 236

Li-ion Lead Acid Lithium Ion Polymer 236

Green Car Congress

JULY 21, 2014

CALEB Technology and California Lithium Battery ( CalBattery )—both based in California— signed an MOU to establish a joint venture to produce a new line of safe, high performance lithium ion batteries for consumer electronic devices, power tools, and electric vehicles (EVs). Batteries' Earlier post.).

Li-ion 247

Li-ion Los Angeles Lithium Sulfur Batteries 247

Green Car Congress

JANUARY 13, 2021

The US Department of Energy (DOE) is awarding an additional $47 million in funding for seven projects as part of the Advanced Research Projects Agency-Energy’s (ARPA-E) Seeding Critical Advances for Leading Energy technologies with Untapped Potential (SCALEUP) program. Earlier post.) Earlier post.) 24M Technologies, Inc.

Li-ion 199

Li-ion Batteries Battery Polymer 199

Green Car Congress

FEBRUARY 23, 2011

Scanning electron microscope image of polyethylene microcapsules spin coated onto Li-ion battery anode. These microcapsules are thermally triggered during thermal runaway conditions and infuse the anode shutting down ion transport and preventing lithium fires. Photo credit: Marta Baginska. Click to enlarge.

Li-ion 240

Li-ion Illinois Concept Batteries 240

Green Car Congress

APRIL 23, 2019

A Columbia Engineering team led by Yuan Yang, assistant professor of materials science and engineering, has developed a new method for safely prolonging battery life by inserting a nano-coating of boron nitride (BN) to stabilize solid electrolytes in lithium metal batteries. When combined with ?1–2 after 500 cycles. —Yuan Yang.

Li-ion 207

Li-ion Batteries Battery Lithium Ion 207

Green Car Congress

MARCH 8, 2013

Schematic illustration of the aqueous rechargeable lithium battery (ARLB) using the coated lithium metal as anode, LiMn 2 O 4 as cathode and 0.5 mol l -1 Li 2 SO 4 aqueous solution as electrolyte. If anode materials of lower redox potentials can be stable in aqueous electrolytes, high energy density systems will be feasible.

Li-ion 281

Li-ion Low Cost Recharge Ni-Li 281

Green Car Congress

JUNE 4, 2013

Schematic illustration of 3D porous SiNP/conductive polymer hydrogel composite electrodes. Each SiNP is encapsulated in a conductive polymer surface. A team at Stanford University has developed stable silicon Li-ion battery anodes by incorporating a conducting polymer hydrogel into the Si-based material.

Li-ion 236

Li-ion Manufacturer Polymer Deep Cycle 236

Green Car Congress

MARCH 27, 2013

A chart from EnerG2’s 2012 DOE Merit Review presentation shows different pore profiles for different energy storage applications. These properties can be tailored and modified for adaptation to the specific requirements of a given energy storage application. Click to enlarge. Aaron Feaver.

Li-ion 281

Li-ion Carbon Standards Energy Storage 281

Green Car Congress

OCTOBER 23, 2013

Researchers at Drexel University report in a paper in the Journal of the American Chemical Society on the potential for 2D niobium and titanium carbide materials as high-power electrode materials for Li-ion batteries (LIBs). Batteries' Earlier post.). 1 and 260 mAh·g ?1 1 ) at higher lithiation voltages. Dr. Michel W.

Li-ion 218

Li-ion Power Powered Batteries 218

Green Car Congress

AUGUST 24, 2016

A team at the Ohio State University has developed a membrane that regulates bi-directional ion transport across it as a function of its redox state and that could be used as a programmable smart membrane separator in future supercapacitors and redox flow batteries. plugin EVs to Tesla’s 85 kWh battery pack). Click to enlarge.

Energy Storage 150

Energy Storage Energy Power Powered 150

Green Car Congress

JANUARY 24, 2014

EnerG2, a company manufacturing advanced nano-structured materials for next-generation energy storage, has introduced a carbon and silicon composite to boost lithium-ion battery capacity and power performance. The company says that it is working both with battery customers and silicon manufacturers. Earlier post.).

Li-ion 236

Li-ion Carbon Lithium Ion Energy Storage 236

Green Car Congress

MAY 2, 2015

Researchers in South Korea have developed free-standing and stackable all-solid-state lithium batteries (ASLBs) with high energy density and high rate capabilities. LiPON (Li 3.3 In the study, the team used either glass-ceramic Li 3 PS 4 or tetragonal Li 10 GeP 2 S 12. Click to enlarge. —Nam et al.

Li-ion 150

Li-ion Batteries Battery South Korea 150

Green Car Congress

JANUARY 19, 2018

A team of researchers led by scientists at the US Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) have designed an active polyelectrolyte binder (PEB) that actively regulates key ion transport processes within a lithium-sulfur battery, and have also shown how it functions on a molecular level.

Lithium Sulfur 199

Lithium Sulfur Polymer Design Li-ion 199

Green Car Congress

MARCH 24, 2014

A team of researchers at the University of Delaware has discovered a “sticky” conductive material that may eliminate the need for binders in Li-ion battery electrodes. The problem with the current technology is that the binders impair the electrochemical performance of the battery because of their insulating properties.

Li-ion 210

Li-ion Carbon Lithium Ion Delaware 210

Green Car Congress

SEPTEMBER 9, 2011

Reversible Li extraction capacity of nanoSi electrodes with alginate, CMC and PVDF binders vs. cycle number collected for the current density of 4200 mA g –1 for cells cycled in the potential window of 0.01-1 1 V vs. Li/Li +. Click to enlarge. With graphite particles, whose volume does not change, the interface remains stable.

Li-ion 301

Li-ion Lithium Ion Batteries Battery 301

Green Car Congress

DECEMBER 7, 2020

An international team of researchers has demonstrated a combination of techniques that allows for the precise measurement of ions moving through a Li-ion battery. The researchers collaborated on this result with the Joint Center for Energy Storage Research (JCESR), a DOE Energy Innovation Hub led by Argonne.

Transportation 170

Transportation International Li-ion Lithium Ion 170

Green Car Congress

JULY 7, 2015

The lead inventors of the technology are UCSB professor Dr. The lead inventors of the technology are UCSB professor Dr. Alan Heeger, the recipient of a Nobel Prize in 2000 for the discovery and development of conductive polymers, and Dr. David Vonlanthen, a project scientist and expert in energy storage at UCSB. Resources.

Polymer 150

Polymer Li-ion Low Cost 2014 150

Green Car Congress

JULY 28, 2017

The Advanced Research Projects Agency - Energy (ARPA-E) is funding research into solid-state materials for improved batteries and fuel cells. Supported work includes crystalline and amorphous inorganics, and polymers manufactured with glass forming, blowing/extrusion, rolling/calendaring, tape casting, and vapor deposition.

Commercial 150

Commercial Li-ion Batteries Battery 150

Green Car Congress

JANUARY 6, 2011

and the US Department of Energy’s (DOE) Argonne National Laboratory (ANL) have reached a non-exclusive worldwide licensing agreement to use Argonne’s patented composite cathode material for advanced lithium-ion batteries. Argonne also licensed the cathode technology to LG Chem for use in battery cells.

Li-ion 210

Li-ion GM Ni-Li Lithium Ion 210

Green Car Congress

OCTOBER 22, 2013

SolidEnergy says that its Solid Polymer Ionic Liquid technology can deliver energy densities upwards of 800 Wh/kg—twice the densities of advanced startup batteries and four times the density of current conventional batteries. So what’s wrong with batteries today? Second is energy density.

Polymer 342

Polymer Energy MIT Massachusetts 342

Green Car Congress

DECEMBER 31, 2012

Discharge capacity (left axis) and Coulombic efficiency (right axis) of the Li 2 S-C cathode as a function of cycle number. Researchers at Cornell University are proposing a new scheme for cathodes for lithium-sulfide batteries ( earlier post ) to prevent lithium polysulfide dissolution and shuttling during electrochemical cycling.

Li-ion 257

Li-ion Lithium Ion Batteries Battery 257

Green Car Congress

OCTOBER 10, 2011

Conventional Li-ion cell (left) compared to Seeo cell (right). The California Energy Commission has awarded $1,585,490 to spur research on projects including a solid-state Li-ion battery system for grid-scale energy storage. Click to enlarge. Commissioners approved $600,000 to Seeo Inc.

Li-ion 186

Li-ion Grid Energy California 186

Green Car Congress

JUNE 1, 2015

Stanford University scientists have created a new ultrahigh surface area three-dimensional porous graphitic carbon material that significantly boosts the performance of energy-storage technologies. The process begins with conducting hydrogel, a water-based polymer with a spongy texture similar to soft contact lenses.

Energy Storage 150

Energy Storage Carbon Lithium Sulfur Energy 150