2011, Downsizing, Gas-Electric and Gasoline-Electric

New Mahle piston ring coating for high-output GTDI engines; chromium nitride using high-velocity oxygen fuel process

Green Car Congress

SEPTEMBER 16, 2015

Mahle has developed a new thermal spray coating for modern high-output direct-injection turbocharged gasoline engines (GTDI). Under development since 2011 at Mahle’s thermal spray development labs in Michigan, the new process initially was designed for high-output GTDI engines currently in production by two US domestic automakers.

Engine

Engine Fuel Michigan South America

ADEPT project to apply gasoline engine HyBoost system to diesel; 48V architecture; full hybrid fuel economy at much lower cost

Green Car Congress

SEPTEMBER 4, 2013

The Ricardo-led Advanced Diesel Electric Powertrain (ADEPT) project will apply 48V “intelligent electrification” concepts, mild hybridization and waste heat recovery in a Ford Focus diesel demonstrator. In 2011, the HyBoost team reported that the HyBoost demonstrator was achieving comparable performance to the conventional 2.0L

Fuel Economy

Fuel Economy Diesel Economy Gasoline

Researchers propose evaluating alt fuel efficiency based on energy rather than volume; impact of ethanol on vehicle efficiency and GHGs

Green Car Congress

MAY 17, 2013

Relative changes in vehicle energy efficiency (VEE) (km/MJ) on ethanol/gasoline blends over those on gasoline for different blending levels. Several recent highly cited LCAs that have incorporated vehicle efficiency differences between gasoline and ethanol/gasoline blends could potentially be misleading. Click to enlarge.

Fuel

Fuel Energy Gasoline-Electric Gasoline

Mazdas new SKYACTIV gasoline and diesel engines are steps on the road to its Ideal Engine; focus on compression ratio

Green Car Congress

AUGUST 4, 2011

the step-by-step introduction of electrification to SKYACTIV internal combustion engines: stop-start, followed by regenerative braking, followed by electric motor drive technologies. Ultimately, the compression ratio ended up playing a central role among these factors in both gasoline and diesel engines, although in different directions.

Mazda

Mazda Engine Gasoline Diesel

IEA: carbon intensity of global energy supply has barely changed in last 20 years; “window of opportunity in transport”

Green Car Congress

APRIL 18, 2013

In 2012, sales of hybrid-electric vehicles passed the one million mark. In addition to the progress in renewables, the report noted that there is a “window of opportunity” opening in the transport sector, headlined by the progress in growth of hybrid electric (HEV) and electric vehicle (EV) sales. million, up 43% from 2011.

Carbon

Carbon Supplies Global Transportation

EPAs GHG Standards for Light-Duty Vehicles; Special Credits To Encourage PHEVs, BEVs and FCVs

Green Car Congress

APRIL 2, 2010

Yesterday, the US Environmental Protection Agency (EPA) and the National High Traffic Safety Administration (NHTSA) jointly established increasingly stringent greenhouse gas emission standards under the Clean Air Act for 2012 through 2016 model-year vehicles and fuel economy standards under the Corporate Average Fuel Economy program, respectively.

EPA

EPA Standards Light PHEV

EC rolls out CARS 2020 action plan for European auto industry

Green Car Congress

NOVEMBER 8, 2012

To meet long-term greenhouse gas emissions targets as well as air quality objectives, the internal combustion engine will be further improved, being accompanied by the development and progressive implementation of breakthrough technologies, such as electrified propulsion. Sizeable efforts. At the same time, road safety.

Auto Industry

Auto Industry 2020 Industrial Industry

Renault 2010 Environment Workshop, Part 1: Combustion Engine Technology and Product Plans

Green Car Congress

JUNE 7, 2010

In terms of powertrain technologies, Renault focused on the introduction of new technologies for internal combustion engines and conventional transmissions, as well as outlining its commitment to electric powertrains. The downsizing process involved shortening the piston stroke by reducing the size of the crank pin and conrod assembly.

Environment

Environment Engine 2010 Parts

Eaton Highlights Range of New Products to Reduce Fuel Consumption and Emissions

Green Car Congress

SEPTEMBER 24, 2010

Electronic Fuel Vapor Management Valve for Hybrid-Electric Vehicles. The electronic fuel vapor management valve for hybrid-electric vehicles manages fuel vapor pressure contained within the fuel tank, increasing safety and enabling automakers to meet emissions regulations. New Engine Valves. Audi will replace the 3.6-liter V6 and 4.2L

Eaton

Eaton Emissions Fuel Range

Center for Automotive Research calls long-run economic risk to auto industry of mandating permanent fuel economy standards very serious; recommends periodic reviews

Green Car Congress

JUNE 14, 2011

CAR did not assume any downsizing of the vehicle sales fleet or significant reduction in performance by vehicles in any segment as a means for increasing fuel economy standards by 2025. per gallon gasoline. per gallon gasoline. Requirements to downsize vehicles would only increase these loss estimates, as the consumer value of.

Fuel Economy

Fuel Economy Economy Auto Industry Standards

Controlled Power Technologies Packages Its Switched Reluctance Systems in ‘RegEnBoost’ System for Enhanced Support for Downsizing

Green Car Congress

DECEMBER 11, 2009

CPT says that the RegEnBoost system enables a typical family-sized car to achieve less than 100 g/km CO 2 with a 1-liter gasoline engine, but when required can offer the same lively performance and in-gear acceleration of a 2-liter naturally aspirated powertrain.

Downsizing

Downsizing Power Powered Exhaust

NRC report finds significant number of near-term technologies could greatly reduce fuel consumption in passenger cars

Green Car Congress

JUNE 16, 2011

The report, Assessment of Technologies for Improving Light Duty Vehicle Fuel Economy estimates the potential fuel savings and costs to consumers of available technology combinations for three types of engines: spark-ignition gasoline, compression-ignition diesel, and hybrid. Compression-ignition technologies.

Fuel

Fuel Downsizing Fuel Economy Diesel

Ford moving to vehicle testing with advanced 2.3L MiGTDI engine research project; Tier 3 SULEV30 target with 25% fuel economy improvement

Green Car Congress

JUNE 23, 2014

Ford’s approach to the project was to engineer a comprehensive suite of gasoline engine systems technologies, including: Aggressive engine downsizing in a mid-sized sedan from a large V-6 to a small I-4. I4 / 25 bar BMEP; during the concept evaluation in 2010 and 2011, the research team revised the architecture to 2.3L

Fuel Economy

Fuel Economy Economy Ford Engine

Using the PHEV (Plug-In Hybrid Electric Vehicle) to Transition Society Seamlessly and Profitably From Fossil Fuel to 100% Renewable Energy

Green Car Congress

JULY 17, 2015

The PHEV (Plug-in Hybrid Electric Vehicle), a subset of the electric car, combines a primary electric motor with a much smaller back-up engine fueled with a hydrocarbon/biofuel mix. (In In this paper PHEV refers solely to the long-range PHEV of 60 miles (100 km) electric-only range.) It is much more than that.

PHEV

PHEV Plug-in Renewable Energy

Chrysler Powertrain Strategy to Rely Heavily on Integrating Fiat Engine Technology; Chrysler to Be Global Center of Competence for Hybrids and EVs for Fiat and Chrysler

Green Car Congress

NOVEMBER 4, 2009

Chrysler’s new powertrain strategy is relying on the rapid transfer of Fiat Group technology for Multiair; Gasoline Direct Injection; turbocharging and alternative fuels to support rapid downsizing and improvement of fuel economy, along with the simplification of the company’s engine line-up, according to Paolo E.

Chrysler

Chrysler Engine Hybrid Global

NHTSA Modeling and Technology Projections Underlying the Proposed CAFE Target of 34.1 mpg by MY 2016

Green Car Congress

SEPTEMBER 21, 2009

On 15 Sep, NHTSA and the US EPA proposed a joint rulemaking on fuel economy and greenhouse gas emissions for light duty vehicles: an average new car 34.1 Combustion restart (CBRST): can be used in conjunction with gasoline direct-injection systems to enable idle-off or start-stop functionality. Click to enlarge.

2016

2016 MPG Fuel Economy EPA

Delphi Highlighting New Components and Systems for Improving Fuel Consumption in Spark Ignition Engines

Green Car Congress

SEPTEMBER 24, 2009

The new systems are part of Delphi’s broad portfolio of powertrain technologies for gasoline, diesel, hybrid and alternative fuel vehicles. By 2017, we expect a 40:60 split in the gasoline market in Europe between port injection and direct injection. The planned introduction date is toward the end of 2011. Delphi CNG injector.

Engine

Engine Fuel Gasoline-Electric Gasoline

How Carmakers Are Responding to the Plug-In Hybrid Opportunity

Tony Karrer Delicious EVdriven

APRIL 21, 2009

GM has announced plans for public sales in 2010, and almost every carmaker now says it will sell PHEVs or highway-speed battery electric vehicles (BEVs) sometime after 2010. Shifted earlier focus to all-electric Focus in 2011 with Magna. Hybrid Sonata model year 2011, possible PHEV version in 2013. No announced plans.

Plug-in

Plug-in Plug Hybrid PHEV

EV Driven

New Mahle piston ring coating for high-output GTDI engines; chromium nitride using high-velocity oxygen fuel process

ADEPT project to apply gasoline engine HyBoost system to diesel; 48V architecture; full hybrid fuel economy at much lower cost

Researchers propose evaluating alt fuel efficiency based on energy rather than volume; impact of ethanol on vehicle efficiency and GHGs

Mazdas new SKYACTIV gasoline and diesel engines are steps on the road to its Ideal Engine; focus on compression ratio

IEA: carbon intensity of global energy supply has barely changed in last 20 years; “window of opportunity in transport”

EPAs GHG Standards for Light-Duty Vehicles; Special Credits To Encourage PHEVs, BEVs and FCVs

EC rolls out CARS 2020 action plan for European auto industry

Renault 2010 Environment Workshop, Part 1: Combustion Engine Technology and Product Plans

Eaton Highlights Range of New Products to Reduce Fuel Consumption and Emissions

Center for Automotive Research calls long-run economic risk to auto industry of mandating permanent fuel economy standards very serious; recommends periodic reviews

Controlled Power Technologies Packages Its Switched Reluctance Systems in ‘RegEnBoost’ System for Enhanced Support for Downsizing

NRC report finds significant number of near-term technologies could greatly reduce fuel consumption in passenger cars

Ford moving to vehicle testing with advanced 2.3L MiGTDI engine research project; Tier 3 SULEV30 target with 25% fuel economy improvement

Using the PHEV (Plug-In Hybrid Electric Vehicle) to Transition Society Seamlessly and Profitably From Fossil Fuel to 100% Renewable Energy

Chrysler Powertrain Strategy to Rely Heavily on Integrating Fiat Engine Technology; Chrysler to Be Global Center of Competence for Hybrids and EVs for Fiat and Chrysler

NHTSA Modeling and Technology Projections Underlying the Proposed CAFE Target of 34.1 mpg by MY 2016

Delphi Highlighting New Components and Systems for Improving Fuel Consumption in Spark Ignition Engines

How Carmakers Are Responding to the Plug-In Hybrid Opportunity

Stay Connected