Remove 2000 Remove Commercial Remove Energy Remove Lithium Sulfur
article thumbnail

USC Viterbi team integrating silicon anode and sulfur-based cathode for Lithium-sulfur battery with low fabrication cost

Green Car Congress

USC Viterbi School of Engineering professor Chongwu Zhou and his research team have developed a silicon nanoparticle anode and a sulfur-based cathode with low fabrication cost and high electrode performance for rechargeable lithium-sulfur batteries. C), with 10 cycles measured and a capacity above 1100 mAh/g at 2000 mA/g (0.5

article thumbnail

Li-S battery company OXIS Energy reports 300 Wh/kg and 25 Ah cell, predicting 33 Ah by mid-2015, 500 Wh/kg by end of 2018

Green Car Congress

UK-based Lithium-sulfur battery company OXIS Energy ( earlier post ) reported developing a Lithium-sulfur cell achieving in excess of 300 Wh/kg. The OXIS scientific team expects to achieve a goal of an energy density in excess of 400 Wh/kg by the end of 2016 and in excess of 500Wh/kg by the end of 2018.

article thumbnail

BioSolar begins development of high-energy anode technology

Green Car Congress

BioSolar, a developer of energy storage technology and materials, has begun development of a high energy anode for current- and next-generation lithium batteries. While this anode is an independent technology, the Company will seek synergies with the Super Cathode technology it has been developing. Earlier post.).

Energy 150