NHTSA Expands Investigation Into Honda Steering Issue

Matt Posky
by Matt Posky

The National Highway Traffic Safety Administration (NHTSA) is expanding a probe into over 500,000 late-model Hondas that could be suffering from a steering defect. Reports indicate that 2023 Honda CR-Vs, 2023 Acura Integras, and 2022-2023 Honda Civics could be affected. However, no formal recall announcement has been made and likely won’t be until the investigation has concluded.


According to the NHTSA’s Office of Defects Investigation, the vehicles in question are seeing reports where “steering can stick and cause a momentary increase in steering effort that could potentially cause overcorrection and an increased risk of a crash.” The issue seems to occur after long bouts of highway driving in most cases.


The NHTSA cited 523 incidents, with Honda noting 804. There also appears to be at least 13 crashes the agency believes might have been related to the issue. Originally, the NHTSA was only worried about the Honda Civic. But the investigation was expanded to the Honda CR-V and Acura Integra due to mechanical similarities between the vehicles.


From Engineering Analysis 23003:


On March 17, 2023, The Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE23-005) to access the alleged defect of momentary increase in steering effort in model years (MY) 2022 and 2023 Honda Civic vehicles. The complaints report that the momentary increase in steering effort (described as Investigation: EA23003 Open Resume Page 2 of 2 "sticky steering") occurs mostly at highway speeds after driving for a certain amount of time. The reports have been received over the past 2 years with most occurring with low vehicle mileage.
The steering gear contains a unit that includes a worm gear and a worm wheel. Honda stated this condition of momentary increase in steering effort occurs due to two factors within this unit. During manufacturing, the worm wheel goes through annealing and component conditioning processes. These processes caused internal stress and strain within the worm wheel. This strain was slowly released over the first few months of the vehicle life. Over time, the released strain caused the deformation of the teeth on the worm wheel, causing the worm gear to catch on the worm wheel. This results in the consumer’s momentary increased [sic] in steering effort. Also, the manufacturing process did not guarantee consistent grease application and therefore, some vehicles within the scope received too little grease which contributes to the momentary increase in steering effort.


The paper goes on to state that incidents seem to take place during the winter months and often “early in the vehicle’s life.” Honda is also aware of the problem and released Service Bulletin 23-037 in July of 2023 to notify dealers to remove the electronic power steering (EPS) gearbox and replace it with a new gearbox when pursuing a fix.


However, it also stated that it found no situation where parts replaced under warranty exceeded steering efforts beyond 2.4 pounds. That seems relatively minor and hardly enough to result in the aforementioned accidents where most drivers claimed they could not overcome the sudden changes in steering effort required to keep their vehicle on the road. Though the variables may also be one of the reasons the NHTSA is expanding its investigation.


Honda has said it’s well aware of the probe and that the company is presently “in communication with the agency on this topic.” The automaker says safety remains committed toward safety and will cooperate with NHTSA through the investigation process. Meanwhile, Honda will continue conducting its own internal review of the matter.


Since there’s no warning light accompanying the issue, we’d advise drivers of new Civics, CR-Vs, or Acura Integras to be extremely cautious while driving. Additional care should be taken when exiting the expressway or making sharp turns at moderate speeds, as those were the circumstances that seemed to yield the most accident reports. The NHTSA estimates roughly 532,535 Honda products could be affected based on the information it currently has.


[Image: Honda]

Become a TTAC insider. Get the latest news, features, TTAC takes, and everything else that gets to the truth about cars first by  subscribing to our newsletter.

Matt Posky
Matt Posky

A staunch consumer advocate tracking industry trends and regulation. Before joining TTAC, Matt spent a decade working for marketing and research firms based in NYC. Clients included several of the world’s largest automakers, global tire brands, and aftermarket part suppliers. Dissatisfied with the corporate world and resentful of having to wear suits everyday, he pivoted to writing about cars. Since then, that man has become an ardent supporter of the right-to-repair movement, been interviewed on the auto industry by national radio broadcasts, driven more rental cars than anyone ever should, participated in amateur rallying events, and received the requisite minimum training as sanctioned by the SCCA. Handy with a wrench, Matt grew up surrounded by Detroit auto workers and managed to get a pizza delivery job before he was legally eligible. He later found himself driving box trucks through Manhattan, guaranteeing future sympathy for actual truckers. He continues to conduct research pertaining to the automotive sector as an independent contractor and has since moved back to his native Michigan, closer to where the cars are born. A contrarian, Matt claims to prefer understeer — stating that front and all-wheel drive vehicles cater best to his driving style.

More by Matt Posky

Comments
Join the conversation
2 of 25 comments
  • NotMyCircusNotMyMonkeys so many people here fellating musks fat sack, or hodling the baggies for TSLA. which are you?
  • Kwik_Shift_Pro4X Canadians are able to win?
  • Doc423 More over-priced, unreliable garbage from Mini Cooper/BMW.
  • Tsarcasm Chevron Techron and Lubri-Moly Jectron are the only ones that have a lot of Polyether Amine (PEA) in them.
  • Tassos OK Corey. I went and saw the photos again. Besides the fins, one thing I did not like on one of the models (I bet it was the 59) was the windshield, which looked bent (although I would bet its designer thought it was so cool at the time). Besides the too loud fins. The 58 was better.
Next