Skip to main content

This clever kit turns bicycles into electric bikes using their disc brakes

We’ve seen plenty of electric bicycle conversion kits around these parts, but rarely is there one that strays as far from the pack as the Skarper. This novel e-bike kit sports a unique look and claims that it can convert just about any bicycle into an electric bike – as long as it uses a disc brake.

That’s because the Skarper e-bike kit actually drives the rear wheel via the disc brake.

There’s a 4 kg (8.8 lb) clip-on mount that houses the motor, battery, and electronics in a slick-looking unit that connects to the bike’s chainstay.

The motor engages the disc brake, but not how you might expect. It doesn’t touch the braking surface, but rather interfaces with another section of the disc closer to the hub. That’s why riders will have to swap on the Skarper disc rotor in place of their own. Other than a few extra grams and a different-looking disc rotor, the bike won’t really be affected when the kit isn’t attached.

With the drive unit removed, the bike theoretically works as it did when it was a traditional pedal bike. But with the drive unit snapped in place, suddenly pedaling the bike will unleash the motor’s power and give riders a boost.

That power is a bit limited, perhaps due to the company’s European roots. The UK-based team had to conform to Europe’s more restrictive electric bicycle laws, which resulted in the Skarper e-bike kit offering just 250W of power and a maximum assisted speed of 25 km/h (15.5 mph).

There’s also no throttle, meaning riders will need to spin those pedals to turn on the helper motor.

With 45 Nm of torque, the assist is likely modest and not overpowering. It will help level out a hill compared to riding without any assistance, but it won’t turn an arduous hill climb into a pleasure cruise.

Top comment by Grant

Liked by 2 people

This looked great until I saw the price, and it only assists up to 15.5 mph. There is only a very small market for this device. Most people will just buy a more traditional eBike and skip this motor. Great concept however.

View all comments

But while it may not be overly powerful, the company says the kit still boasts an impressive range to the tune of 30-50 km (18-31 miles) depending on the selected power level.

Recharging takes 2.5 hours, though in a pinch they say a quick 30-minute charge will get you 10-15 km (6-9 miles) of range.

The Skarper electric bike conversion kit seems to be sold out, but the company says they’ll open a new round of pre-orders for the £1,295 (approximately US $1,650) soon for delivery in early 2024.

That price is fairly lofty when you consider that many light electric bikes with similar power levels and battery sizes are priced at half as much, but then again they don’t turn themselves back into pedal bicycles with the click of a button.

FTC: We use income earning auto affiliate links. More.

Stay up to date with the latest content by subscribing to Electrek on Google News. You’re reading Electrek— experts who break news about Tesla, electric vehicles, and green energy, day after day. Be sure to check out our homepage for all the latest news, and follow Electrek on Twitter, Facebook, and LinkedIn to stay in the loop. Don’t know where to start? Check out our YouTube channel for the latest reviews.

Comments

Author

Avatar for Micah Toll Micah Toll

Micah Toll is a personal electric vehicle enthusiast, battery nerd, and author of the Amazon #1 bestselling books DIY Lithium Batteries, DIY Solar Power, The Ultimate DIY Ebike Guide and The Electric Bike Manifesto.

The e-bikes that make up Micah’s current daily drivers are the $999 Lectric XP 2.0, the $1,095 Ride1Up Roadster V2, the $1,199 Rad Power Bikes RadMission, and the $3,299 Priority Current. But it’s a pretty evolving list these days.

You can send Micah tips at Micah@electrek.co, or find him on Twitter, Instagram, or TikTok.