Exhaust International Low Cost Waste 
Green Car Congress
SEPTEMBER 23, 2015
Researchers at Oak Ridge National Laboratory (ORNL) have developed a ternary mixed oxide catalyst composed of copper oxide, cobalt oxide, and ceria (dubbed “CCC”) that outperforms synthesized and commercial platinum group metal (PGM) catalysts for CO oxidation in simulated exhaust streams while showing no signs of inhibition—i.e.,
Green Car Congress
JANUARY 31, 2012
Borla Performance Industries , a leader in the design and manufacture of stainless steel performance exhaust, has an option to license a novel nanopore membrane technology developed at Oak Ridge National Laboratory (ORNL). For the recovery of previously wasted energy from relatively low temperature (.
Green Car Congress
OCTOBER 1, 2014
GMZ Energy’s proprietary platform technology enables the low-cost manufacturing of bulk thermoelectric materials. The unique properties of half-Heusler materials combined with proprietary module fabrication techniques enable scalable, low-cost manufacturing of half-Heusler modules yielding a cost per watt below $1.00
Green Car Congress
NOVEMBER 7, 2010
Kreutz used two examples of CCTF systems in his analysis: biodiesel from microalgae and Sandia National Laboratory’s S2P process (an effort to utilize concentrated solar energy to convert waste CO 2 into synthetic fuels, earlier post ). Kreutz used what he called a bifurcated climate regime—i.e., their CO 2 (e.g. ~90%)
Green Car Congress
SEPTEMBER 11, 2014
The idea is to take as little energy as possible from the internal combustion engine. We then multiplied the sources of electrical energy for power units by adding solar panels and installing an exhaust gas heat energy recovery system based on the Rankine cycle. The more energy there is available at low cost, the more it will be used.
Green Car Congress
AUGUST 10, 2011
This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber. 10,000,000. .
Green Car Congress
MAY 28, 2015
This quality control device will help to drive down the costs of fuel cells by reducing waste and improving the process efficiency of roll-to-roll manufacturing of polymer electrolyte membranes. High Loading Lithium-Ion Electrode Architecture for Low Cost Electric Vehicle Batteries Ballast Energy, Inc. 149,871.44.
Expert insights. Personalized for you.
150 
Let's personalize your content