Baua Electric

APRIL 8, 2024

Join this webinar , presented by HBK, where we will go through cabling best practices, measurement techniques, filtering, and advanced measurement technologies to reduce the impact of EMC on electrical powertrain measurements. This can be difficult for engineers experienced in measuring inverters, and overwhelming for people new to inverters.

Charging 52

Charging Electric Electrical Insight 52

Baua Electric

APRIL 4, 2024

In this webinar , presented by Chroma, we’ll explore testing solutions that are not only comprehensive but also cost-effective. The post Testing bi-directional power electronics (Webinar) – Charged EVs appeared first on Bauaelectric Auto News. Reserve your spot —it’s free! Reserve your spot—it’s free!

Power 52

Power Powered Charging Wind 52

Baua Electric

MARCH 29, 2024

Join us for this webinar , presented by Easton, dedicated to discussing the role that battery venting plays in the development of safe, reliable, and high-performance battery packs for EVs. This holistic approach offers a transformative solution to combat energy losses, promoting increased efficiency and sustainability in EV designs.

Batteries 52

Batteries Battery Charging Energy Storage 52

Baua Electric

FEBRUARY 29, 2024

Planning, designing, and executing an end-to-end EV battery return program doesn’t need to be difficult if you have the right game plan. This webinar will be hosted by CHARGED on Thursday, March 7th, at 11 am US EST. Register now, it’s free! Building an EV reverse logistics ecosystem: How to avoid the 7 deadly sins!

Transportation 52

Transportation Charging Batteries Battery 52

Baua Electric

MARCH 28, 2024

In this webinar , presented by NI—now part of Emerson—we will discuss a new technological approach proposed for end-of-line (EOL) testing, which integrates advanced functionality, performance, safety, and reliability testing protocols optimized for automotive applications. Reserve your spot—it’s free! Reserve your spot—it’s free!

Production 52

Production Charging Energy Storage Conversion 52

Baua Electric

APRIL 11, 2024

Join this webinar , presented by NI—Now Part of Emerson, to take a look into the world of power electronics for battery testing. Join this webinar , presented by CSM, to learn more. The post A deep dive into the power electronics used for battery testing (Webinar) – Charged EVs appeared first on Bauaelectric Auto News.

Power 52

Power Powered Batteries Battery 52

Baua Electric

MARCH 27, 2024

In this webinar , presented by Keysight Technologies at the Spring Virtual Conference on EV Engineering, April 15-18, 2024, we will analyze how the efficiency of individual components contributes to the overall laboratory efficiency, how to interpret data points, and what levers could be used to optimize.

Energy 52

Energy Batteries Battery Charging 52

Baua Electric

APRIL 1, 2024

In this webinar , we show the problem in the acoustics of EVs and the solutions for eMobility and NVH analysis: Challenges in electric vehicle acoustics Synchronous acquisition of NVH and power data on the powertrain Correlation of NVH and power analyses Reserve your spot—it’s free! Charging test solution and Grid Edge test solution.

Charging 52

Charging DC Insight Grid 52

Baua Electric

JANUARY 29, 2024

Planning, designing and executing an end-to-end EV battery return program doesn’t need to be difficult if you have the right gameplan. This session will highlight best practices and practical solutions ranging from: • Regulations • Package design • OEM and supply chain management • Data and reporting technology • Carrier considerations.

Building 52

Building Charging Supplies Auto 52

Baua Electric

JANUARY 23, 2024

Aerogel is emerging as a superior, performance-enabling material in thermal barriers designed to mitigate thermal runaway risk and reduce the risk of fires occurring in lithium-ion batteries in electric vehicles (EV). This webinar will be hosted by CHARGED on Thursday 29 February at 1pm US EST Register now – it’s free!

Electric Vehicles 52

Electric Vehicles Lithium Ion Charging Batteries 52

Cars That Think

JANUARY 25, 2024

Join us for this webinar on RF GaN amplifier design using electromagnetic/thermal 3D solvers. The webinar will outline the steps required to convert this to a physical layout for electromagnetic simulation and verification while integrating packaging and thermal effects co-simulation to analyze a complete packaged system.

Design 52

Design Insight Convert Engine 52

Cars That Think

NOVEMBER 7, 2022

The development of new hybrid and battery electric vehicles introduces numerous design challenges. Many of these challenges are static or low-frequency electromagnetic by nature, as the devices involved in such designs are much smaller than the operating wavelength. Register now for this free webinar!

Design 54

Design Motor Motors Motoring 54

Cars That Think

JANUARY 3, 2023

Designing a complex actuator system involving these. Engineers and scientists can use finite element analysis (FEA) software to design and optimize these systems more efficiently. Register now to join this free webinar. He has more than a decade of experience in modeling and designing electromagnetic devices.

Design 54

Design Engine Convert Environment 54

Baua Electric

APRIL 11, 2024

The conference includes live webinar sessions with interactive Q&As and on-demand webinars. Next week, Charged is hosting a virtual conference on EV engineering that’s free to attend. View the daily session schedule online here. All live sessions will be recorded and available to view after the broadcasts.

Charging 52

Charging Engine Manufacturer Supplies 52

Cars That Think

APRIL 13, 2023

Engineers must determine the performance and the lifetime of the systems they are designing and deploying. The increased density of components increases the interdependency of design considerations. Register now for this free webinar. Thermal issues are now one of the primary failure modes for electronic systems.

Design 68

Design Wind Engine All-Electric 68

Cars That Think

OCTOBER 6, 2023

Welcome to a transformative learning experience designed to bridge the gap between micro-level components and macro-level systems in wireless communication. This webinar will take you on a comprehensive journey, starting with the design of a Gallium Nitride (GaN) amplifier from a transistor model.

Design 65

Design Environment Connect Connected 65

Cars That Think

NOVEMBER 16, 2022

In this webinar, we explain the design principles and operation of our fourth-generation digitizers with a focus on the application programming interface (API). Register now for this free webinar!

Design 90

Design Engine Production 90

Cars That Think

MARCH 6, 2024

This has led to a surge in demand for electric machines and the related design and development efforts. The designs of these electrical machines need to meet various specifications, including efficiency and power density requirements. Register now to attend this free webinar!

Motor 60

Motor Motors Motoring Electric 60

Green Car Congress

FEBRUARY 25, 2021

In a webinar hosted by Randall Krantz, a Senior Project Adviser at the Getting to Zero Coalition, the partners revealed that they are on track to design, build, and commission the world’s first ammonia-fueled tanker by 2025. SHI is already working on the design of a tanker and will build the vessel when the time comes.

Fuel 243

Fuel Singapore Mariner International 243

Cars That Think

NOVEMBER 16, 2021

As a result, designing with DDR becomes more challenging than ever before and standard signal integrity analysis is no longer sufficient. Register for this free webinar now. DDR6X and GDDR7 with PAM4).

Design 60

Design Connect Connected Standards 60

Plug in America

APRIL 12, 2024

This certification recognizes our efforts to provide employee EV incentives and our creativity in designing and developing partnerships that advance access to EV charging and zero-emissions transportation. EVAL was inspired by the well-recognized and respected Leadership in Energy and Environmental Design (LEED) building certification.

Plug-in 68

Plug-in America Plug Re-Charge 68

Cars That Think

SEPTEMBER 13, 2022

Register now for this free webinar! The phased antenna array design workflow for such systems is typically both comprehensive and complex, which many times requires a combined effort from different experts. How to use ModelCenter to schedule the design variations for the optimizer. How to drive time savings in your project.

Design 69

Design Environment Connect Connected 69

Cars That Think

APRIL 19, 2023

Designing efficient motors is critical for increasing range, reducing battery capacity requirements, and improving power density and costs. Register now to attend this free webinar. To accomplish such design, using multiphysics modeling and simulation is essential. We invite you to attend this webinar.

Motor 56

Motor Motors Motoring Electric 56

Baua Electric

APRIL 17, 2024

In particular, our portfolio helps EV manufacturers solve key challenges, such as reducing flammability, boosting dielectric strength and optimizing design and assembly.”

Batteries 52

Batteries Battery Charging North America 52

Cars That Think

AUGUST 25, 2022

As a result creating a stable and compliant design is more challenging than ever before and standard signal integrity analysis is no longer sufficient. Register now for this free webinar! Keysight is offering a design flow, which gives you all the insights you need.

Insight 61

Insight Standards Design Range 61

Baua Electric

APRIL 19, 2024

“A group of five MB drivers…were trained to operate the Tesla Semi, which uniquely positions the steering wheel and driver’s seat in the center of the cockpit and has other design features to increase driver visibility and safety,” MB told Electrek. Overall, our drivers had positive feedback on how the vehicle performs.”

Fleet 52

Fleet Tesla Charging Nevada 52

Cars That Think

MAY 16, 2022

If you want to enhance your modeling and design processes for microfluidic organ-on-a-chip devices, tune into this webinar. You will also learn how to distill simulation output to find key design parameters and obtain a high-level description of system performance and behavior. The webinar will conclude with a Q&A session.

Design 57

Design Transportation 57

Cars That Think

FEBRUARY 7, 2023

For the development of applications based on electroporation, designers are turning to multiphysics simulation software to accurately represent the process that involves coupled electrical and structural phenomena. Attend this webinar to learn how COMSOL Multiphysics® can be used to address the unique modeling aspects in this field.

Manufacturer 54

Manufacturer Design Electric Electrical 54

Cars That Think

MARCH 7, 2024

Leveraging solutions for electromagnetic wave propagation, electronically steered antenna design tools, and a digital mission simulation, engineers can rapidly deploy models and execute them within a high-fidelity, physics-accurate digital testing environment. Register now to attend this free webinar!

Environment 52

Environment Engine Design Industrial 52

Electric Auto Association

NOVEMBER 4, 2021

The next of the series, Breaking down EV Charging Barriers , on December 1 at 9 AM PST, will address issues around EVs and multifamily dwellings, on-street charging, reliable public charging, and rate designs. Last month EV pick up trucks… The most recent event, the October 21 webinar Haul Yes!

GM 88

GM Ford America Charging 88

Cars That Think

AUGUST 29, 2022

Register now for this free webinar! The need for proximity makes designing EDGE nodes complex. This reduces the signal latency to levels that allow technologies such as autonomous vehicle control, AR/VR applications, eVTOL, emergency communications, smart factory operation, smart cities, large IoT systems, and more.

Connect 63

Connect Connected Design Engine 63

Cars That Think

OCTOBER 25, 2023

The CSTF hosts panel sessions and webinars where experts discuss how technology can lessen the impact of climate change. One webinar, for example, brought together representatives from the ETH Zurich university, the Clean Energy Ministerial forum, and Student Energy. Partnering with IRENA, the U.N.,

Climate Change 75

Climate Change Climate United Arab Emirates Renewable 75

Cars That Think

AUGUST 24, 2022

To predict thermal runaway, it is necessary to account for several different physical phenomena, including chemical reactions within the cell, heat transfer at the cell and pack level, the structural design of the pack, and fluid flow in the battery pack's cooling system.

Li-ion 52

Li-ion Lithium Ion Batteries Battery 52

Cars That Think

JUNE 23, 2023

The need for power optimizers has become an important design requirement for new power electronics devices to operate efficiently for varying levels of power production (such as solar power and wind turbine systems) and power consumption (in the case of electric vehicles). Register now to join this free webinar!

Power 59

Power Powered DC Wind 59

EV Club of CT

OCTOBER 23, 2023

New Webinars Announced for Program Updates The incentive program from the Public Utilities Regulatory Authority (PURA) that is administered through the state’s two largest utilities, Eversource and United Illuminating gets evaluated every year. Read more

Charging 52

Charging Design Electric Vehicles Vehicles 52

Cars That Think

NOVEMBER 9, 2021

From the design board to the realization of a sensor, an essential step to achieving the desired performance is the characterization of the sensing element. Register for the webinar here. They will also show how to set up feedback controllers for maximal precision, and review the trade-offs between open- and closed-loop operation.

Universal 52

Universal Design 52

Green Car Congress

JUNE 28, 2013

The new center will provide a mechanism to merge NIST expertise and resources in materials science, materials characterization, reference data and standards with leading research capabilities in industry and academia for designing, producing and processing advanced materials. Participation in the webinar is not required to apply.

2013 186

2013 United States Standards 2011 186