The 150kW DC Charging Station has been well received by many customers as our hot-selling high-power EV charger while providing service to countless EV owners. With more and more EVs on the road, the demand for high-power chargers is increasing, so maintenance is critical to ensure safe and efficient EV charging. In this article, we will discuss the importance of maintaining a 150kW DC Charging Station and provide tips on how to do so.

Tips for maintaining your 150kW DC Charging Station

Clean Appearance

The outer surface of the charger is cleaned every two months and needs to be kept in reasonable condition to maintain an aesthetically pleasing image.

  • Stop all charging processes, disconnect the power supply and return the charging port to its place.
  • Remove foreign matter and dust from the cabinet surface with a damp, soft, dust-free cloth.
  • Use pH 6~8 cleaning agents only for solid stains. And then wipe clean with water.
  • Do not use a high-pressure water gun to clean the cabinet surface.
  • Do not use corrosive solvents, aerosols, solvents or abrasives. Do not use corrosive solvents, sprays, solvents or abrasives.

Clean and replace air filter cotton and dust screen

The 150kW DC Charging Station has many air filters to protect the electronics from dust damage, and you need to clean the air filters and dust screens at least once every six months.

  • Be sure to stop all charging processes before cleaning and replacing.
  • Open the side door of the charging station; when the cabinet door is open, the charger will not be directly exposed to the weather.
  • Remove the baffle plate after unscrewing the hand screw, and remove the original air filter.
  • Clean the debris or dust from the filter wool and dust screen.
  • Install the cleaned filter wool and install the baffle plate and screws.
  • Close the side door of the charging post.

Testing leakage protection devices

Leakage protection devices are critical safety systems that need to be tested every year and need to be tested once. Do not test the leakage protection during charging. Do not test the leakage protection device during charging. Stop all charging processes before testing. Stop all charging processes before testing. Disconnect the charger from the EV.

Remote Maintenance

The charger has networking capabilities and can monitor numerous parameters in real time. For example, it provides perfect remote diagnosis, remote service and remote upgrade service, which can timely find and locate problems in the operation process and realize unattended operations.

  • Daily self-test of the system. If there is any abnormality, report it to the background.
  • If there is any abnormality in operation, please get in touch with the SETEC POWER customer service centre in time.

Regularly inspecting the cable and plug, checking the electrical system, monitoring the temperature, protecting the charger from the elements, and regularly updating the firmware are all important steps to keep the charger in good condition. By taking care of the charger, you can ensure it lasts for a long time and performs well in charging your electric vehicle.