Green Car Congress

FEBRUARY 22, 2015

Driven by a faster-than-expected pace of technology development, carbon-fiber reinforced plastics (CFRPs) will be poised to gain widespread adoption for automotive lightweighting by 2025, according to a new report from Lux Research, “Scaling Up Carbon Fiber: Roadmap to Automotive Adoption.”. Earlier post.)

Carbon Fiber 150

Carbon Fiber Carbon Automobile 2007 150

Green Car Congress

MARCH 26, 2013

The US Department of Energy (DOE) launched the Clean Energy Manufacturing Initiative (CEMI), which will focus on growing US manufacturing of clean energy products and boosting US competitiveness through major improvements in manufacturing energy productivity. Clean Energy Manufacturing Initiative.

Manufacturer 246

Manufacturer Carbon Fiber Clean Cleaning 246

Green Car Congress

FEBRUARY 18, 2011

million) grant from the Bavaria FIT program under the Bavarian undersecretary of the state of Katja Hessel to fund the development of a novel carbon-fiber precursor with revised properties. The objective of the company is to develop and supply carbon fiber precursor exclusively for SGL Group and European production.

Carbon Fiber 186

Carbon Fiber Grant Carbon 2006 186

Green Car Congress

MARCH 9, 2011

Teijin Limited has achieved a significant reduction in the cycle time required for molding carbon fiber reinforced plastic (CFRP) automobile cabin frame, bringing it to less than one minute. Long-fiber thermoplastic pellet: high-strength pellet made from carbon fiber, suited for injection molding of complex parts.

Carbon Fiber 199

Carbon Fiber Carbon Automobile Concept 199

Revenge of the Electric Car

APRIL 12, 2010

BMW MegaCity Urban Electric Car To Be Built of Carbon Fiber. First, the raw feedstock to make carbon fibers–just call it a “polacrylonitrile-based precursor&# –is made in Japan by a joint venture between SGL and Mitsubishi Rayon and flown to the U.S. April 7th, 2010. By John Voelcker Senior Editor.

Carbon Fiber 133

Carbon Fiber BMW Carbon Mitsubishi 133

Green Car Congress

NOVEMBER 18, 2009

Specifically, the funding will go toward reducing the production cost of carbon fiber manufacturing, to help in reducing the weight of vehicles; improved efficiency and lower costs for car batteries; and net-zero energy building technologies. ORNL will also receive $20.2

Carbon Fiber 199

Carbon Fiber Carbon Building Manufacturer 199

Green Car Congress

JANUARY 24, 2020

This investment will support transformational research and development (R&D), innovative hydrogen concepts that will encourage market expansion and increase the scale of hydrogen production, storage, transport, and use.

Market 207

Market Carbon Fiber Hydrogen Energy Storage 207

Green Car Congress

DECEMBER 17, 2019

The initial H2@Scale FOA, released by EERE in FY19, focused on enabling R&D for hydrogen production, transport, and storage, as well as first-of-kind pilot demonstrations of integrated systems with on-site nuclear power and multiple renewable energy sources. Potential topics under the FOA include: Electrolyzer Manufacturing R&D.

Market 195

Market Carbon Fiber Hydrogen Mariner 195

Green Car Congress

MAY 14, 2013

The operating and maintenance cost of in-service compressors is exacerbated by the on/off cycling of the compressors resulting from a lack of station demand. The capital cost of the commercial hardware remains high due to low production volumes. Storage Cost Reduction Opportunities.

Cost Of 199

Cost Of Hydrogen Carbon Fiber Low Cost 199

Green Car Congress

JANUARY 9, 2015

The new Institute for Advanced Composites Manufacturing Innovation (IACMI), announced today by President Obama, will focus on advanced fiber-reinforced polymer composites that combine strong fibers with tough plastics to yield materials that are lighter and stronger than steel. Adherent Technologies, Inc.; TPI Composites, Inc.;

Tennessee 150

Tennessee Universal Manufacturer Honda 150

Green Car Congress

OCTOBER 20, 2012

Carbon-based products and materials company SGL Group has completed the acquisition of the Portuguese acrylic fiber company Fisipe—Fibras Sintéticas de Portugal S.A. For precursor production, the textile fiber production lines already in place are being gradually converted and expanded.

Carbon Fiber 218

Carbon Fiber Companies Portugal Carbon 218

Green Car Congress

AUGUST 31, 2016

A US Department of Energy (DOE) program designed to spur the use of high performance supercomputers to advance US manufacturing has funded 13 new industry projects for a total of $3.8 High-performance computing offers critical new insight into these phenomena, which in turn will accelerate the product’s entry into the market.

Manufacturer 150

Manufacturer EPRI Lithium Sulfur Carbon Fiber 150

Green Car Congress

JUNE 9, 2017

million for 30 new projects aimed at discovery and development of novel, low-cost materials necessary for hydrogen production and storage and for fuel cells onboard light-duty vehicles. Precursor Development for Low-Cost, High-Strength Carbon Fiber. The US Department of Energy (DOE) announced approximately $15.8

Hydrogen 170

Hydrogen Carbon Fiber Fuel Low Cost 170

Green Car Congress

OCTOBER 31, 2013

The FOA includes the following topics: Topic Area 1: Reducing the cost of compressed hydrogen storage systems. different operating pressure, or cold/cryogenic compressed hydrogen); and advanced state-of-the-art compressed tank manufacturing. 350 to 700 bar) storage vessels are constructed using expensive high-strength carbon fiber.

Carbon Fiber 218

Carbon Fiber Hydrogen 2017 Carbon 218

Green Car Congress

AUGUST 13, 2012

These projects include the development and validation of modeling tools to deliver higher performing carbon fiber composites and advanced steels, as well as research into new lightweight, high-strength alloys for energy-efficient vehicle and truck engines. Fiber Thermoplastic Composites. Lead organization. Description.

Carbon Fiber 231

Carbon Fiber Carbon United States Fuel Economy 231

Green Car Congress

OCTOBER 6, 2016

These projects will leverage national lab consortia launched under DOE’s Energy Materials Network (EMN) this past year ( earlier post ), and will support the President’s Materials Genome Initiative and advanced manufacturing priorities. Source: “2015 Fuel Cell Technologies Market Report” Click to enlarge.

Industrial 253

Industrial Industry Fuel Carbon Fiber 253

Green Car Congress

JUNE 21, 2016

At an event in Washington, President Obama announced that the Smart Manufacturing Leadership Coalition (SMLC) will lead the new Smart Manufacturing Innovation Institute, in partnership with the Department of Energy. The Smart Manufacturing Innovation Institute is the ninth manufacturing hub awarded by the Obama Administration.

Manufacturer 150

Manufacturer Los Angeles Oregon Connecticut 150

Green Car Congress

AUGUST 30, 2016

LeMond Composites, founded by three-time Tour de France champion Greg LeMond, has licensed a low-cost, high-volume carbon fiber manufacturing process developed at the US Department of Energy’s Oak Ridge National Laboratory (ORNL). Earlier post.)

Carbon Fiber 218

Carbon Fiber Low Cost Carbon Manufacturer 218

Baua Electric

FEBRUARY 3, 2024

Tier-1 major Anand Group, which set up a new subsidiary – Anevolve – to focus on green technology and clean mobility solutions, has showcased a range of innovative products, targeted at the fast-growing EV industry, at the ACMA Automechanika 2024 / Bharat Mobility Show at Pragati Maidan in New Delhi.

Carbon Fiber 52

Carbon Fiber India Japan Range 52

Green Car Congress

NOVEMBER 18, 2016

The US Department of Energy (DOE) announced approximately $30 million in available funding ( DE-FOA-0001647 ), subject to appropriations, for research and development of low-cost hydrogen production, onboard hydrogen storage, and proton exchange membrane fuel cells to advance the widespread commercialization of fuel cell electric vehicles.

Hydrogen 150

Hydrogen Fuel Carbon Fiber Water 150

Green Car Congress

MARCH 24, 2016

Researchers at the Department of Energy’s Oak Ridge National Laboratory have demonstrated a production method they estimate will reduce the cost of carbon fiber as much as 50% and the energy used in its production by more than 60%. Details of the cost analysis will be shared with the prospective licensees.

Carbon Fiber 150

Carbon Fiber Carbon Manufacturer Energy 150

Green Car Congress

AUGUST 21, 2015

Carbon nanofibers have been synthesized from a variety of materials including pitch, rayon, polyacrylonitrile, solid carbon materials, acetone, or hydrocarbon gases, by employing electrospinning/carbonization, chemical vapor deposition (CVD), arc/plasma techniques, etc. Atmospheric air is added to an electrolytic cell.

Low Cost 150

Low Cost Carbon Li-ion Carbon Fiber 150

Green Car Congress

AUGUST 10, 2011

This project will develop a new process that enables low-cost, domestic manufacturing of magnesium. This project will develop a novel low cost route to carbon fiber using a lignin/PAN hybrid precursor and carbon fiber conversion technologies leading to high performance, low-cost carbon fiber.

Carbon Fiber 268

Carbon Fiber Lithium Ion Li-ion Vehicles 268

Green Car Congress

MARCH 31, 2014

The selected projects include 6 vehicle-related technologies and 2 hydrogen and fuel cell technologies, as well as new hydropower, heat pump, solar and manufacturing technologies. By the end of Phase II, Mainstream plans to demonstrate a production-ready prototype that exceeds DOE targets for fuel economy, operating range, and cost.

Exhaust 261

Exhaust Wind 2014 Motor 261

Green Car Congress

SEPTEMBER 17, 2014

To achieve this, Renault collaborated with French automotive industry partners such as car glass manufacturer Saint-Gobain, seat supplier Faurecia, tire company Michelin and Continental (brake system). Their production requires a hot stamping process which Renault already uses for its production cars. —Laurent Taupin.

Plug-in 370

Plug-in MPG Hybrid Plug 370

Green Car Congress

OCTOBER 30, 2022

For example, IDTechEx expects that lithium-metal and solid-state batteries, axial flux motors, and carbon fiber materials will play an important role in eVTOL markets. OEMs need to design large EVs from scratch and manufacture at volume to realize economy-of-scale savings.

Market 150

Market Electric Vehicles Vehicles Cars 150

Clean Fleet Report

DECEMBER 31, 2021

This limited production luxury sedan (1,500 units worldwide) ceased production in November 2021, and ushers-in a new era for the Polestar brand seeing only all-electric cars and SUVs going forward. Polestar plans on being a major manufacturer of all-electric luxury vehicles, competing with the likes of Lucid, Porsche and Tesla.

PHEV 76

PHEV Carbon Fiber Plug-in Gasoline-Electric 76

Green Car Congress

MARCH 19, 2014

Besides filling stations, planners need to consider factors such as how to move the fuel from the central manufacturing facilities to those stations. In addition, PNNL is a leader in hydrogen storage and hydrogen production technology development and is a member of the DOE Hydrogen Storage Engineering Center of Excellence.

Hydrogen 199

Hydrogen USA Carbon Fiber North America 199

Green Car Congress

JUNE 8, 2016

The purpose of the RFI is to identify future strategic research and development pathways for the DOE to pursue with potential to meet future system cost targets. Currently, carbon fiber (CF) reinforced polymer (CFRP) composites are used to make COPVs. The conversion process of PAN precursor to CF is also energy intensive.

Hydrogen 150

Hydrogen Polymer Vehicles Carbon Fiber 150

Green Car Congress

OCTOBER 12, 2015

A team at Argonne National Laboratory has taken a closer look at vehicle-cycle (all processes related to vehicle manufacturing) and vehicle total life-cycle (vehicle-cycle plus fuel cycle—i.e., Further, a recent study highlights the regional variability of GHG emissions for electricity-intensive material production, such as aluminum.

Carbon Fiber 150

Carbon Fiber Vehicles Emissions Fuel 150

Green Car Congress

JANUARY 22, 2015

Topics addressed include: advanced batteries (including manufacturing processes) and electric drive R&D; Lightweight materials; Advanced combustion engine and enabling technologies R&D; and Fuels technologies (dedicated or dual-fuel natural gas engine technologies). Reducing the cost of electric drive systems from $30/kW to $8/kW.

Fuel 150

Fuel Hydrogen Vehicles Carbon Fiber 150

Green Car Congress

DECEMBER 11, 2015

The US Department of Energy (DOE) announced up to $35 million in available funding to advance hydrogen and fuel cell technologies ( earlier post ) to support research and development, early market deployments, and domestic manufacturing. AOI 1 Topic 1: Hydrogen Production R&D: Advanced High‐Temperature Water Splitting.

Hydrogen 150

Hydrogen Fuel Climate Production 150

Green Car Congress

OCTOBER 4, 2009

In a news conference at the Japan National Press Club on Friday, Toyota Motor President Akio Toyoda said that the company plans to begin mass production of electric vehicles in the US in 2012, followed by US production of fuel cell vehicles in 2015. The company is working to develop a low-cost CFRP for a high-pressure hydrogen tank.

2015 315

2015 Toyota Commercial Fuel 315

Green Car Congress

MAY 20, 2016

Researchers led by a team from Oak Ridge National Laboratory (ORNL) have developed a new laser process that could make joining carbon fiber composites and aluminum for lightweight cars and other multi-material high-end products less expensive—as well as making the joints more robust. Adrian Sabau.

Carbon Fiber 170

Carbon Fiber Carbon Long Beach Polymer 170

Green Car Congress

AUGUST 7, 2020

Oak Ridge National Laboratory and its partners will develop a cost-effective and efficient smart structural coating deposition system and advanced high-end technology tools to inspect and rehabilitate gas distribution pipelines. ULC Robotics will research and test a method for fabricating new pipes using Cold Spray Additive Manufacturing.

Gas 297

Gas Gas-Electric Universal Colorado 297

Green Car Congress

JUNE 12, 2012

The US Department of Energy (DOE) awarded more than $54 million—leveraging approximately an additional $17 million in cost share from the private sector—for 13 projects to advance transformational technologies and materials that can help manufacturers significantly increase the energy efficiency of their operations and reduce costs.

Carbon Fiber 210

Carbon Fiber Manufacturer Carbon Lithium Sulfur 210

Green Car Congress

JANUARY 14, 2011

The company is also running its largest display ever at NAIAS, featuring feature a broad spectrum of new products including the all-new Ford Focus, Ford Explorer, Mustang Boss 302, Ford C-MAX multi-activity vehicle and Ford F-150 with four all-new powertrains. —Barb Samardzich.

Ford 252

Ford Fuel Emissions Vehicles 252