Baua Electric

JANUARY 9, 2024

The German luxury car manufacturer has said that it aims to launch more than 12 new models in India in 2024 and at least three of them will be electric cars. As the newly launched flagship Mercedes-Benz SUV is ready to take on its rivals, here is a price and specification comparison between Mercedes-Benz GLS , Audi Q8 and BMW X7.

Audi 52

Audi Mercedes BMW Price 52

Green Car Congress

MAY 20, 2023

Germany-based Liacon, one of Europe’s largest battery manufacturers, has released a new, more versatile lithium-iron-phosphate (LFP) battery that can replace all Group 31 lead-acid units. In comparison our lithium-iron-phosphate (LFP) batteries have ten times the life, cycling over 4,000 times. —Philip M.

Lead Acid 435

Lead Acid Batteries Battery Energy Storage 435

Get Electric Vehicle

MAY 5, 2021

Ltd manufactures this electric scooter. The following table shows the comparison of Ather 450X and Simple Energy Mark 2. The range comparison with Ather 450x doesn’t make much sense because the range test conditions are completely different. Ather 450x is one of the best electric scooters available in the Indian market.

Li-ion 52

Li-ion Range India Charging 52

Cars That Think

FEBRUARY 9, 2024

And the global impact of the semiconductor chip manufacturing itself is expected to increase as well because of the fact that we need more and more of these chips. This increase in demand for so many chips and the demand for the manufacturing of those chips will have a significant impact on the climate impact of the semiconductor industry.

Climate 66

Climate Manufacturer Emissions Industrial 66

Baua Electric

JULY 17, 2023

Experian registration information for January to Would possibly displays the tougher state, particularly for EV manufacturers that grew abruptly latter yr however have didn’t conserve the momentum. The post EV registrations cool for some manufacturers that had been scorching latter yr appeared first on Bauaelectric Auto News.

Manufacturer 52

Manufacturer F-150 Ford Chevrolet 52

Green Car Congress

JANUARY 26, 2018

National Research Council of Canada (NRC) researchers Fabrice Bernier and Jean-Michel Lamarre have developed a cold-spray additive-manufacturing process to fabricate permanent magnets for electric motors. Magnets created using cold spray additive manufacturing are easy to machine when compared to the more brittle sintered magnets.

Manufacturer 170

Manufacturer Motor Motors Motoring 170

Green Car Congress

NOVEMBER 5, 2020

V reaching 10% capacity increase in comparison to a standard G/NMC cell resulting in lower cost of installed battery pack (euros per kWh) for EV-applications. Both cell types are produced in a pouch format in the company’s Willstätt, Germany manufacturing facility. Stable cells cycled between 3.00 - 4.35

Energy 435

Energy Germany Lithium Ion Switzerland 435

InsideEVs

MAY 17, 2022

Tesla expressed hope that "every car manufacturer will strive to produce hundreds of thousands of EVs per year."

2017 94

2017 Tesla Sale Manufacturer 94

Green Car Congress

FEBRUARY 24, 2023

In comparison to hydrogen, liquefied ammonia makes it easier to transport large volumes to wherever it is needed. In this way, ammonia from hydrogen produced via electrolysis can be used to make the entire brick manufacturing process chain carbon dioxide-free. It was exhibited at the Hannover Messe 2023.

Transportation 273

Transportation Industrial Industry Energy 273

Green Car Congress

FEBRUARY 4, 2014

Additive Manufacturing (AM) systems and services company EOS and Airbus Group Innovations (previously EADS Innovation Works) recently completed an environmental lifecycle comparison of two key production technologies: conventional rapid investment casting and Direct Metal Laser Sintering (DMLS). Source: Airbus Group Innovations.

Manufacturer 199

Manufacturer Design Building Parts 199

Green Car Congress

DECEMBER 18, 2020

Battery electric trucks should be the baseline for hydrogen fuel cells electric vehicle (HFCEV) comparisons, rather than any internal combustion engine alternative. Stop comparisons of fill times. What is the value of a comparison on fill times? Fill times are moving targets for both fuel cell and battery electric vehicles.

Hydrogen 482

Hydrogen Fuel Fleet Davis 482

Green Car Congress

NOVEMBER 14, 2020

Under the terms of contracts in 2018-2019, domestic manufacturers GAZ and KAMAZ supplied 300 electric buses to Moscow. For comparison—in October, there were 300 electric buses in London, 259 in Paris, 200 in Berlin and 164 in Amsterdam, according to Mosgortrans, the major bus operator of the city.

Fleet 521

Fleet Lithium Titanate Europe Electric 521

Baua Electric

JULY 28, 2023

LONDON — MG has admitted it is going to most likely price the corporate extra to develop automobiles in a deliberate Eu manufacturing facility when compared with China however says the advantages will outweigh the negatives. “I A Eu manufacturing facility would additionally carry higher hyperlinks to the area. and Europe head.

Automobile 52

Automobile Manufacturer Price Neighborhood 52

Green Car Congress

SEPTEMBER 3, 2014

The California Air Resources Board (ARB) will conduct a public hearing on 23 October to consider amendments to the Zero Emission Vehicle (ZEV) regulation that would modify the requirements for intermediate volume manufacturers (IVMs) selling into the state to allow them more time to come into the advanced technology vehicle market.

California 246

California Manufacturer 2018 Land Rover 246

Green Car Congress

DECEMBER 11, 2022

Nucor Corporation, a North American manufacturer of steel and steel products, has made an equity investment in Electra , a Colorado-based start-up developing a process to produce carbon-free iron that can be used to make steel. Existing electric arc furnaces account for 70% of steel production in the US.

Carbon 293

Carbon Companies Colorado Coal 293

Green Car Congress

MARCH 22, 2023

The patented technology increases the range of vehicles, achieves high torque density, is cost-efficient to manufacture and requires fewer natural resources; in turn, reducing environmental impact. DeepDrive says that their motor will have less than 30% of the cost per N·m in comparison to current state-of-the-art motors.

BMW 259

BMW Motor Motors Motoring 259

Green Car Congress

AUGUST 22, 2023

To enable this comparison, a detailed techno-economic analysis, supported by rigorous process modelling, is conducted. … In summary, while H 2 -DRI has been investigated in literature, this study provides a comprehensive techno-economic comparison of NG-DRI and H 2 -DRI configurations.

Green 355

Green Hydrogen Gas-Electric Gas 355

Green Car Congress

JUNE 22, 2022

The new manufacturing site sets a new benchmark for the sector, producing one DC fast charger every 20 minutes from its seven production lines. ABB E-mobility employs more than 350 R&D experts globally and has a portfolio of more than 350 granted patents.

DC 259

DC Italy Production Waste 259

Green Car Congress

APRIL 2, 2023

a) Comparison of the predicted costs required for hydrogen and ammonia produced by renewable electricity in 2030, assuming that it is produced in Australia and then transported to Japan (reproduced based on data from the International Energy Agency). A pathway toward sustainable steel production via ammonia-based direct reduction.

Production 444

Production Hydrogen Renewable Australia 444

Baua Electric

MAY 19, 2023

However decreasing the will for brandnew aluminum would support corporations short carbon emissions by means of up to 90 according to cent in comparison with conventional processes, consistent with Magna and Pacific Northwest Nationwide Laboratory. The post Magna, U.S.

Manufacturer 52

Manufacturer Power Powered Production 52

Green Car Congress

JULY 1, 2023

By comparison, until recently, production staff used ultrasound to monitor manually the quality of resistance spot welding (abbreviated WPS in German) processes based on random analyses. This means that, for example in manufacturing, it is possible to conclusively demonstrate how the result of an AI-based test comes about.

Audi 195

Audi Installation Manufacturer Maintenance 195

Green Car Congress

MARCH 25, 2021

The index—now in its tenth year—facilitates a comparison of competitive positions of the relevant automotive nations (the US, Germany, China, France, Italy, Japan and South Korea) in the field of e-mobility, based on an objective assessment of those countries in three key areas: technology, market and industry.

Stimulus Package 259

Stimulus Package Stimulus South Korea France 259

Green Car Congress

JULY 21, 2023

These results demonstrate the possibility of improved all-solid-state batteries via metallurgical design of negative electrodes while simplifying manufacturing processes. —Liu et al. b) Schematic of a SSB with an aluminum-based negative electrode, SSE separator, and NMC composite positive electrode.

Li-ion 370

Li-ion Georgia Batteries Battery 370

Green Car Congress

JUNE 16, 2020

A feature of the new tests is the use of hydrogen generated as a by-product in the manufacture of sodium hydroxide by Tokuyama, using the chloralkali process as fuel for the FC generator. The rated output has been changed to 50 kW, and other enhancements have been made, such as adjusting the component layout to improve maintenance.

Hydrogen 362

Hydrogen Toyota Japan Fuel 362

Green Car Congress

SEPTEMBER 12, 2023

Hatch was commissioned to conduct a commercial-scale capital and operating cost comparison study, as well as a high-level evaluation of plant emissions and impacts to natural resources between NOVONIX’s patent-pending process and the conventional wet process.

Waste 150

Waste Lithium Ion Sodium Water 150

Green Car Congress

JANUARY 22, 2020

As scale-up of production, distribution and equipment manufacturing continues, cost is projected to decrease by up to 50% by 2030 for a wide range of applications, making hydrogen financially competitive with other low-carbon alternatives and, in some cases, even conventional options.

Hydrogen 320

Hydrogen Cost Of Renewable Japan 320

Green Car Congress

JANUARY 5, 2023

The steel industry produces about eight percent of the world’s CO₂ emissions due to the high amount of fossil fuels used to manufacture steel through conventional methods. For comparison, the production capacity of the Inkoo coal-fired power plant equalled the combined capacity of the Loviisa nuclear power plant’s units 1 and 2.

Finland 437

Finland Green Coal Hydrogen 437

Green Car Congress

JANUARY 29, 2023

Solid state batteries with their solid electrolyte are expected to provide greater safety and performance in comparison to lithium-ion batteries which presently power electric vehicles and have a liquid electrolyte. Ilika will receive a grant of £2.8 BMW Group and WAE Technologies will join the project’s steering committee.

London 273

London BMW Lithium Ion Universal 273

Green Car Congress

JULY 1, 2020

The BMW Group now has a contractual agreement with it cell manufacturers so that they will use only green power to produce BMW’s fifth-generation battery cells, according to BMW AG Management Board Chairman Oliver Zipse. For comparison, that is roughly the amount of CO 2 a city of over a million inhabitants, like Munich, emits per year.

BMW 170

BMW Green Power Powered 170

Green Car Congress

AUGUST 23, 2023

Germany-based RENK Group, a manufacturer of mission-critical drive technologies, is supplying three high-speed special gear units via RENK-Maag GmbH , a group company, for compressors for the production of green steel to Siemens Energy Compressors GmbH as part of the “SALCOS” (Salzgitter Low CO2 Steelmaking) project of the Salzgitter AG steel group.

Supplies 195

Supplies Green Production Hydrogen 195

Teslarati

DECEMBER 18, 2023

For comparison, Lang stated that the entire budget for a community of 9,000 residents was about €20 million. Recently, Tesla Manufacturing posted on X that it recycles 100% of its process water, diffusing any concerns about the water supply at Gigafactory Berlin.

Tesla 127

Tesla Water Waste Tax 127

Green Car Congress

JANUARY 14, 2023

This enables the metal to be used directly in the manufacture of parts such as suspension components in cars. This is a gamechanger in the manufacture of aluminum car components because the process is both quicker and cheaper without the extrusion stage. It also prevents the wastage of large amounts of raw materials.

Norway 273

Norway Waste Production Manufacturer 273

Green Car Congress

OCTOBER 7, 2022

By comparison, 69% of steel today is made at approximately 1,600 degrees Celsius (2,912 degrees Fahrenheit) using coal, emitting about two tons of carbon dioxide for every ton of steel produced. We also have a historic opportunity to decentralize the global iron and steel supply chain and re-shore manufacturing and mining jobs.

Coal 360

Coal Boston Carbon Green 360

Green Car Congress

JULY 8, 2023

Freudenberg Sealing Technologies has provided its Thermal Interface Material (TIM) elastomer for use in high-quantity series production of a EV charging port for a well-known car manufacturer. For comparison, the thermal conductivity of air is 0.026. The manufacturing process makes thin-walled components possible.

Charging 195

Charging Production Volt Connect 195

Green Car Congress

JUNE 16, 2012

Ford has reduced the amount of energy required to produce each vehicle in its manufacturing facilities by 22% in the last six years. The amount of electricity used to produce each vehicle in Ford’s manufacturing facilities has been reduced by about 800 kilowatt-hours—from 3,576 kWh in 2006 to 2,778 kWh in 2011.

2016 256

2016 Ford Manufacturer Energy 256

Green Car Congress

MAY 13, 2023

CHIPS Act sets aside $39 billion in direct federal assistance to produce semiconductors in the US, which is the fastest growing demand share of high purity aluminum discs These laws do offer some supply-side support, specifically the manufacturing production tax credit (45X) and investment tax credit (48c).

Production 225

Production Tax Credit Tax Electric 225

Green Car Congress

JANUARY 4, 2016

Researchers from the Korea Advanced Institute of Science and Technology (KAIST), with colleagues from the Korea Institute of Energy Research (KIER), Qatar University and major battery manufacturer LG Chem have developed a technique for the delicately controlled prelithiation of SiO x anodes for high-performance Li-ion batteries.

Ni-Li 150

Ni-Li Li-ion Manufacturer Batteries 150