Skip to main content

EGEB: A ‘molecular glue’ discovery makes perovskite solar cells more durable

In today’s Electrek Green Energy Brief (EGEB):

  • Brown University researchers find a way to strengthen a key weak point in perovskite solar cells.
  • Ørsted and Polish energy company PGE to build 2.5 GW Baltica 2 and 3 offshore wind farms.
  • UnderstandSolar is a free service that links you to top-rated solar installers in your region for personalized solar estimates. Tesla now offers price matching, so it’s important to shop for the best quotes. Click here to learn more and get your quotes. — *ad.

Perovskite solar cell “glue”

Brown University researchers have figured out how to improve the long-term reliability of perovskite solar cells, as per a new study published today in Science.

Perovskite cells are very good at absorbing light. Their efficiency now rivals that of traditional silicon cells. Perovskite light absorbers can be manufactured at near room temperature, unlike silicon, which requires extreme heat. Perovskite films are also about 400 times thinner than silicon wafers. They’re cheaper to make than silicon cells. But making perovskite cells more stable and reliable has been challenging – until now.

As Brown University’s news page explains:

Each [perovskite] cell contains five or more distinct layers, each performing a different function in the electricity-generation process. Since these layers are made from different materials, they respond differently to external forces. Also, temperature changes that occur during the manufacturing process and during service can cause some layers to expand or contract more than others. That creates mechanical stresses at the layer interfaces that can cause the layers to decouple. If the interfaces are compromised, the performance of the cell plummets.

So the scientists figured out a way to strengthen the weakest of those interfaces – which is between the perovskite film used to absorb light and the electron transport layer – with compounds known as self-assembled monolayers (SAMs).

They found that a SAM formulation with silicon atom on one side and iodine atom on the other could form strong bonds with the electron transport layer and the perovskite layer. Further, the SAM actually improved the cell’s efficiency, and it’s inexpensive.

Non-SAM cells prepared for the study retained 80% of their peak efficiency for around 700 hours of lab testing. Meanwhile, the SAM cells were still going strong after 1,300 hours of testing. Based on those experiments, the researchers project the 80% efficiency life of the SAM cells to be about 4,000 hours.

Going forward, the researchers intend to fortify the entire perovskite solar cell stack. They recently won a $1.5 million grant from the US Department of Energy to expand on their research.

Poland’s offshore wind

Danish wind giant Ørsted and Polish energy company PGE have closed a joint venture agreement to develop, construct, and operate the nearly 2.5 gigawatt Baltica 2 and 3 offshore wind farms off the Polish coast.

Renews.biz reports that Ørsted and PGE submitted an application for registration to the National Court Register and have now closed the transaction. The Polish Office of Competition and Consumer Protection approved the joint venture in mid-March.

Baltica 2 (1500 MW) and (1045 MW) Baltica 3 have already received environmental permits and signed grid connection agreements, and the Polish Energy Regulatory Office awarded Contracts for Difference on April 7. Baltica 3 could become operational in 2026, while Baltica 2 could come online before 2030.

“PGE aims to install at least 6.5GW of offshore wind capacity by 2040, and is currently helping to develop just over 4.1GW of Polish offshore wind capacity,” according to Windpower Monthly. “Poland aims to have 3.8GW of offshore wind capacity installed by 2030, 10GW by 2040, and 28GW by 2050.”

Poland is aiming for net zero by 2050, but has the challenge of being a coal-heavy country.

Photo: Padture Lab/Brown University

FTC: We use income earning auto affiliate links. More.

Stay up to date with the latest content by subscribing to Electrek on Google News. You’re reading Electrek— experts who break news about Tesla, electric vehicles, and green energy, day after day. Be sure to check out our homepage for all the latest news, and follow Electrek on Twitter, Facebook, and LinkedIn to stay in the loop. Don’t know where to start? Check out our YouTube channel for the latest reviews.

Comments

Author

Avatar for Michelle Lewis Michelle Lewis

Michelle Lewis is a writer and editor on Electrek and an editor on DroneDJ, 9to5Mac, and 9to5Google. She lives in White River Junction, Vermont. She has previously worked for Fast Company, the Guardian, News Deeply, Time, and others. Message Michelle on Twitter or at michelle@9to5mac.com. Check out her personal blog.