Green Car Congress

SEPTEMBER 30, 2009

Both partners have been working on the development of the industrial fermentation and down-stream processing of bio-based succinic acid and will start production of commercial quality and volumes in the second quarter of 2010. Furthermore, low cost succinic acid has high potential as a platform chemical and its downstream products.

Production 210

Production 2004 Low Cost Polymer 210

Green Car Congress

APRIL 9, 2010

SK Energy uses a lithium manganese oxide cathode material, mixing in NMC material for stabilization; a surface-modified graphite on the anode; a gel polymer electrolyte; and a ceramic-coated proprietary SK separator featuring low shrinkage and high heat resistance. SK Energy Investor Presentation (April 2010). Earlier post.).

Li-ion 186

Li-ion Electric Vehicles Lithium Ion Energy 186

Green Car Congress

FEBRUARY 26, 2013

Strategic corporate shifts because of increased availability of low-cost natural gas. In the final RFS rule (2010), EPA assessed the lifecycle GHG (greenhouse gas) emissions of multiple renewable fuel pathways (defined as feedstock, fuel type, and fuel production process).

EPA 225

EPA Renewable 2007 2012 225

Green Car Congress

JANUARY 18, 2014

Further, lightweight materials projects are sought that emphasize a combination of unique materials and processes to enable weight reduction of greater than 30% at a cost of less than $2.25 Sample topic areas that might address one or more of these barriers include: Lower cost carbon fiber through use of unconventional non?petroleum

Carbon Fiber 252

Carbon Fiber Engine Battery Powered Fuel 252

Green Car Congress

JUNE 17, 2010

Cenovus’s Greater Pelican Region also includes the current Pelican Lake polymer flood operation in the Wabiskaw formation and a potential future project in the Grosmont carbonate formation. Increased capital investment is expected to facilitate production growth at its Pelican Lake polymer flood operation, in the Greater Pelican Region.

2019 199

2019 Production Energy Oil 199

Green Car Congress

OCTOBER 14, 2010

Over the past years we have made tremendous progress to develop a low-cost production process to convert biomass into YXY building blocks. We look for industrial partners in the polymer, chemicals, materials and fuels sectors to support our development of YXY based materials and fuels, and help us create a truly green economy.

Building 186

Building Netherlands Convert 2000 186

Green Car Congress

AUGUST 1, 2010

The FY 2010 BATT Request for Proposals on the “Synthesis and Characterization of Novel Anode Materials and Structures for Use in Lithium Batteries” has resulted in new projects that can help accelerate the application of such batteries in plug-in hybrid electric vehicles and electric vehicles. initiative. Pennsylvania State University.

Li-ion 186

Li-ion Batteries Battery Lithium Ion 186

Green Car Congress

AUGUST 16, 2016

In 2010, the Energy Department launched the SuperTruck initiative to improve heavy-duty truck freight efficiency by 50%. Accelerated Development and Deployment of Low‐Cost Automotive Mg Sheet Components (Area of Interest 3). Advances for the Production of Low‐Cost Electric Drive vehicle Motors (Area of Interest 5).

Vehicles 150

Vehicles Plug-in Lithium Ion Universal 150

Green Car Congress

FEBRUARY 14, 2010

Polymer composites are too expensive for body structures in large volume vehicle production and difficult to recycle. However, the properties and cost of current light alloy materials, and the associated manufacturing processes, are already inhibiting progress, according to the LATEST2 team.

Grant 199

Grant Land Rover Light Cars 199

Green Car Congress

MARCH 17, 2010

The easy synthesis, low cost and non-toxicity of graphene make this material a promising candidate for gas storage applications. Ford and T.Yildirim (2010) Gas adsorption properties of graphene-oxide-frameworks and nanoporous benzene-boronic acid polymers. March 18, 2010. NIST theorist Taner Yildirim. Resources.

Hydrogen 218

Hydrogen Store Portland Pennsylvania 218

Green Car Congress

JULY 3, 2010

The goal of the Li-air project is to combine experiments and computational modeling to identify optimal cathode catalysts for Li-air batteries that could power low-cost electric vehicles with a driving range comparable to today’s gasoline-powered vehicles.

Michigan 186

Michigan Universal Renewable Energy 186

Green Car Congress

DECEMBER 4, 2010

Keasling notes that bulk chemicals such as solvents and polymer precursors currently are rarely produced from microorganisms, because they can be produced inexpensively from petroleum by chemical catalysis. Keasling (2010) Manufacturing Molecules Through Metabolic Engineering. —Jay Keasling. —Jay Keasling. Science Vol.

Engine 239

Engine Design Fuel Polymer 239

Green Car Congress

MAY 4, 2018

The objective of the Advanced Algal Systems Program is to accelerate the commercialization of algal biofuels by overcoming barriers identified in the 2010 National Algal Biofuels Technology Roadmap, updated in June 2016. Biochemical, thermochemical and hybrid conversion routes are allowed.

Waste 170

Waste Renewable Conversion Carbon 170

Green Car Congress

JANUARY 22, 2014

Area Of Interest (AOI) 1: Development of Low-Cost, High-Strength Automotive Aluminum Sheet. This AOI is to address two major technical gaps in the performance of automotive aluminum alloys: Low strength among cost competitive automotive sheet alloys such as 5xxx and 6xxx series. 2010 Baselines. Click to enlarge.

Emissions 252

Emissions Vehicles Fuel Economy Carbon Fiber 252